You seem like a person who can appreciate every little thing in life haha. Great thorough review, I can't wait for mine to arrive. Hope the slicer issues get sorted soon though
I found mine wouldn't print properly out of the box without a .07 z-axis offset profile in the slicer. Right out of the box it was smearing its layers after leveling, eventually, I'll try manually adjusting it but for now, I just have to remember to pick the right profile every time.
@@Scratch3DPrinting prints fine now, very happy with it, I'm not soft like some people who can't handle being required to understand the mechanical aspects of their machines.
❓Q: ❓in this printer, when it prints in multicolor, does it do 1 color at a time per layer? I was thinking of adding 1-2 color only on some layers and starting and ending with different colors to reduce pooping. ie. in minies having a green grass base, but not having any other greens.
Yes it does print the color by layers, like yours if you only have a green base and no other color within those layers then it will print that color until it needs to change to another color. Hope that makes sense if not let me know.
could you do a video on how to make it print something in a couple of colors, doesn't seem to be any out there on how to actually do this, do you use the app or slicer on a PC to do this
Sure I'll find the time to make a video on how to print multi color on the Kobra 3. You can use their Anycubic Slicer Next on PC and paint the part that you want to print in the color that you want.
@@Scratch3DPrinting It was limited to the first 5000 printers or some such. It does however get delivered separately. So it may still turn up. The mystery box came with the printer.
Hi, nice video on K3. I got my K3 for a week. the only issue is I can't connect the Orca slicer with the K3. hope you can share with us the steps to set up the WiFi connection using Orca slicer. Many Tks.
That second unused 4 pin plug on the back of the AMS is where the second AMS unit plugs in im betting, it probably works like a piggy back kinda thing and would use the same 4 to 6 pin cable to go from AMS to AMS. Sound right? Lol
@Scratch3DPrinting it just came to mind and I couldn't think of a better reason for the extra plug lol, if each ACE has both then you don't have to worry about which one is downstream yanno 🤷
trash. had problems since the get go, had it for a few months and the newest problem is the number 4 filament thing does not feed the filament. it was making noises then made a sound like an alarm squeaking, now the thing spins in place but wont feed the filament at all. i took the cover off and all the gears do is spin, 1 2 3 all work but not 4.
@@Scratch3DPrinting they already sent me a new print head to replace the original print head and a touchscreen to replace the non working one. if they keep sending me stuff i will have 2 printers, lol, their quality is just garbage, I am printing on my ender 3se as i type this because it is more reliable. seems like the kobra 3 can't print with multicolor filament as well. so far it has clogged 100% of the time, and not even the same spool or colors. it is just 100% certified crap. had I known I would have gotten bambulab.
Mine would need CONSTANT ADJUSTMENT to the z axis. Ranging from -.20 on one print right to .27 or more on the next. No auto leveling between. Needless to say it was immediately returned
Would be good to see a review of the other features from the K3. Like the wi-fi, mobile app, etc. Also, I believe it is possible to setuo a webcam to monitor the prints, right? Would be good to see that in action.
Yes more I'm going to cover more things about the Kobra 3, just didn't want to put in 1 video, it would be hours lol. Anycubic does have a camera for the Kobra 3, but I didn't get it.
Ahh, I didn't think about the. But I think if that's the problem, it could have cause more filament mistakes other than just that one layer, but it's something to think about.
Man, what a great video! Loved the step by step setup and all the tests! Very very informative video. Nicely done! I'm subscribing expecting to see more of K3 from you. Keep it up! *I bought a K3 yesterday, I'm super excited to receive it. But it is still on pre-sale on AliExpress, so it will only ship out on August because I live in Brazil, I guess T-T
I’m seeing so many mixed reviews about the Kobra 3 and ACE, NONE of which I saw PRIOR to purchasing it. I had heard dozens of good reviews, up until the moment I bought it lol. WHYYYYY?!?! They suckered me in with the idea of adding a secondary ACE to be able to print up to 8 colors at a time and I had no idea of the amount of WASTE that would result in. I’m ashamed, I did NOT do my research correctly lol. 😅😅😅
Anyone else’s box look JUST LIKE THAT ONE?! I know mine did! The one top left corner I have seen crushed or torn in some way on EVERY online unboxing video I have seen so far lol. I wonder why that is lol? 🤔 Hopefully it has no effect on the printer itself. 😅
I purchased this printer and I am not liking the results(.) This printer consistently has failed prints. It shits (wastes) too much plastic. And now it clogged the printhead and now it's useless. Yes China is gonna send me a new printhead, but three weeks to a month to receive from China. boo hoo. YES THIS PRINTER SUCKS THE BIG ONE.
ahh man, that sucks, mine has been printing really nicely and consistently with no problems. I hope that new print head will makes your Kobra 3 better.
Get your Anycubic Kobra 3 Combo: amzn.to/4cu3Z0s ($110 coupon)
You seem like a person who can appreciate every little thing in life haha. Great thorough review, I can't wait for mine to arrive. Hope the slicer issues get sorted soon though
Haha. I do. Congrats on getting your. This 3d printer is really good.
I found mine wouldn't print properly out of the box without a .07 z-axis offset profile in the slicer. Right out of the box it was smearing its layers after leveling, eventually, I'll try manually adjusting it but for now, I just have to remember to pick the right profile every time.
I had to constantly adjust mine. For the price, it wasn’t worth the headache. Sent it back
thats not good to hear. I wish these 3d printer would be more consistent. Good luck on your 3d printing journey.
@@Scratch3DPrinting prints fine now, very happy with it, I'm not soft like some people who can't handle being required to understand the mechanical aspects of their machines.
@@loganmacneil3424 That's great to hear. Yeah every 3d printer is different and once it's dial in it can print well.
❓Q: ❓in this printer, when it prints in multicolor, does it do 1 color at a time per layer? I was thinking of adding 1-2 color only on some layers and starting and ending with different colors to reduce pooping. ie. in minies having a green grass base, but not having any other greens.
Yes it does print the color by layers, like yours if you only have a green base and no other color within those layers then it will print that color until it needs to change to another color. Hope that makes sense if not let me know.
The fact that your of Asian decent makes me automatically trust your word on technology right off the bat is I'm now buying one
glad to hear!
could you do a video on how to make it print something in a couple of colors, doesn't seem to be any out there on how to actually do this, do you use the app or slicer on a PC to do this
Sure I'll find the time to make a video on how to print multi color on the Kobra 3. You can use their Anycubic Slicer Next on PC and paint the part that you want to print in the color that you want.
@@Scratch3DPrinting Yes I am using it just not sure how to do this coloring thing. Thank you
amazing review! im planning on getting into 3d printing and trying to learn/relearn it all.
Go for it, 3d printing is really nice to do and useful.
Hey, did you get a camera and 1 kg of PLA Pantone for the Kobra 3 Combo?
It’s come gift when your pre-order from Anycubic
No I did not get the camera and the 1kg pla. I bought mine after the pre-order.
Here in Austria I can still pre order it for 450$/€. And it says that it comes with 1kg free PLA and Kamera. Is the Pre Sale in your country over?
@@Manuel-df8fr It looks like it's still going on here too. I got mine on amazon, just because of shipping time.
@@Scratch3DPrinting It was limited to the first 5000 printers or some such. It does however get delivered separately. So it may still turn up. The mystery box came with the printer.
Can you share the multi-color settings for the kobra3 combo Anycubic Slicer? It fails because color bleeding continues.
I just use the default settings for color changing, but I will try to make a profile and share it.
Awesome review and instruction
Thank you!
Which printer would you choose? Bambu lab a1 combo or kobra 3 combo?
I think both of those 3d printers are grate, I don't have the a1 so I cannot say which one is better.
Hi, nice video on K3. I got my K3 for a week. the only issue is I can't connect the Orca slicer with the K3. hope you can share with us the steps to set up the WiFi connection using Orca slicer. Many Tks.
I am trying to figure this out too. There's not much information on this yet. I will let you guys know once I figure it out.
That second unused 4 pin plug on the back of the AMS is where the second AMS unit plugs in im betting, it probably works like a piggy back kinda thing and would use the same 4 to 6 pin cable to go from AMS to AMS. Sound right? Lol
Ahh, that does make sense. I think you're right.
@Scratch3DPrinting it just came to mind and I couldn't think of a better reason for the extra plug lol, if each ACE has both then you don't have to worry about which one is downstream yanno 🤷
trash. had problems since the get go, had it for a few months and the newest problem is the number 4 filament thing does not feed the filament. it was making noises then made a sound like an alarm squeaking, now the thing spins in place but wont feed the filament at all. i took the cover off and all the gears do is spin, 1 2 3 all work but not 4.
man that sucks, you can try and open a ticket with Anycubic I bet they can help you out, or even replace the 4 slot.
@@Scratch3DPrinting they already sent me a new print head to replace the original print head and a touchscreen to replace the non working one. if they keep sending me stuff i will have 2 printers, lol, their quality is just garbage, I am printing on my ender 3se as i type this because it is more reliable. seems like the kobra 3 can't print with multicolor filament as well. so far it has clogged 100% of the time, and not even the same spool or colors. it is just 100% certified crap. had I known I would have gotten bambulab.
Mine would need CONSTANT ADJUSTMENT to the z axis. Ranging from -.20 on one print right to .27 or more on the next. No auto leveling between. Needless to say it was immediately returned
what? maybe you got an unlucky one, mine works really well. I hope your next 3d printer works great out of the box.
Would be curious to see a "versus" comparison between the A1 combo and this one
YES! I would love to do it. But there is one factor that's preventing me from doing it. $ :) I'll try though.
super vidéo merci
Would be good to see a review of the other features from the K3. Like the wi-fi, mobile app, etc.
Also, I believe it is possible to setuo a webcam to monitor the prints, right? Would be good to see that in action.
Yes more I'm going to cover more things about the Kobra 3, just didn't want to put in 1 video, it would be hours lol. Anycubic does have a camera for the Kobra 3, but I didn't get it.
Presliced files won't know what colour each object is. You need to purge more filament going from dark to light colours.
Ahh, I didn't think about the. But I think if that's the problem, it could have cause more filament mistakes other than just that one layer, but it's something to think about.
Hi, did your model get rapidly tangled, clogged while print multiple colors?
Hi, no it did not get tangled while printing multi colors. It works great.
Man, what a great video! Loved the step by step setup and all the tests! Very very informative video. Nicely done!
I'm subscribing expecting to see more of K3 from you. Keep it up!
*I bought a K3 yesterday, I'm super excited to receive it. But it is still on pre-sale on AliExpress, so it will only ship out on August because I live in Brazil, I guess T-T
Thank you for your support. I try to add many details in my videos. Congrats on getting a Kobra 3. I hope you enjoyed it once you received it.
I’m seeing so many mixed reviews about the Kobra 3 and ACE, NONE of which I saw PRIOR to purchasing it. I had heard dozens of good reviews, up until the moment I bought it lol. WHYYYYY?!?! They suckered me in with the idea of adding a secondary ACE to be able to print up to 8 colors at a time and I had no idea of the amount of WASTE that would result in. I’m ashamed, I did NOT do my research correctly lol. 😅😅😅
Congrats on your Kobra 3. I have seen people make the second ACE work and do 8 colors. Yeah lots of waste but still a good 3d printer overall.
My unit the nozzle completely broke off in frist 24 Hours. I have ordered parts. Not happy buy
ahh dam, that sucks. Hopefully your new nozzle will hold up.
Anyone else’s box look JUST LIKE THAT ONE?! I know mine did! The one top left corner I have seen crushed or torn in some way on EVERY online unboxing video I have seen so far lol. I wonder why that is lol? 🤔 Hopefully it has no effect on the printer itself. 😅
Yeah, it did had a torn but does not effect the printer and mine is all good.
Wow that alot of poop but print looks good
Yeah, so much color change so it poops alot 🤣
I purchased this printer and I am not liking the results(.) This printer consistently has failed prints. It shits (wastes) too much plastic. And now it clogged the printhead and now it's useless. Yes China is gonna send me a new printhead, but three weeks to a month to receive from China. boo hoo. YES THIS PRINTER SUCKS THE BIG ONE.
ahh man, that sucks, mine has been printing really nicely and consistently with no problems. I hope that new print head will makes your Kobra 3 better.
This is the worse 3d printer of all time. Nothing. But issues
Some people have issues and some don't.