I have the same car, year and model 2007, but there are no signs of gear changes, or problems reaching high speed but those same codes appeared, do you think that changing that solves that problem or does something else persist?
You need to explain what solenoid number or letter is it.......and from we’re was it taken out from...,..from what part of the valve body......thank you
Hi,i just had these codes yesterday all of a sudden(CEL),p2714 and p0751.the car was just shifting fine.i resetted the codes and drove with the car for like 16 miles.the car shifts good just like it should and always does and so far no CEL.any ideas?
Buen dia,,, me aparece codigo 2714 en mi Toyota FJ Cruiser 2008, ya cambie filtro transmision y atf fluid y sigo con misma bronca, me pudieras dar numero de parte del solenoide SLT de mi carro, para conseguirlo???Gracias....Hector, Tijuana
Mándame el VIN a mi email danimecatronico@gmail.com así te puedo ayudar a conseguir el número de parte para ponerlo en la base de datos a ver qué nos arroja !! ✌🏼
I have the same P2714 code on a 2007 Lexus is250. Transmission doesn't slip and I do not notice any issues with gear changes. Where are you located? I would like to take my car to your shop. I am in Los Angeles.
@@danielscustoms13Hola, me gusta tu canal, yo tengo un 2007 tundra con el codo P2714 y P0761, la reversa no quiere enganchar, engancha cuando esta frio el fluido de la transmision y despues queda como en neutral.
Damn mala suerte you need to replace that solenoid valve but is very easy just remove the oil panel transmission and change the solenoid and that's it !!
I got these codes after my gx460 transmission started suddenly slipping. I pulled the solenoid and it bench tested good. I did not ohm it out. Could it still actuate and ohms be out of spec?
Test the solenoid a lot times on bench I'm pretty sure that your solenoid is stuck open when is hot, I recommend you replace the solenoid, let me know!! 👍🏻
@@danielscustoms13 mine solenoid SLT are make buzzing noise when test with scantool and when test with 12v it's clicking. It is normal that buzzing noise on SLT? Got code P27137F too and can't shift to 4th gear
I have that code and testing the SLT Solenoid it works fine.
Can I still drive the car
I have the same car, year and model 2007, but there are no signs of gear changes, or problems reaching high speed but those same codes appeared, do you think that changing that solves that problem or does something else persist?
You need to explain what solenoid number or letter is it.......and from we’re was it taken out from...,..from what part of the valve body......thank you
it is on the video description (Solenoid letter "D" SLT ) Thank you !!
I want to order it at the dealership but i need to knw whats the number on the solenoid
What part number is that?
35290-34010
autoparts.stevenscreektoyota.com/products/product/solenoid-assy-line-pressure-control-3529034010?siteid=shp_tpco_20546286892_google_searchoptics_shopping_13559236618626442001&gad_source=1&gclid=CjwKCAjwzN-vBhAkEiwAYiO7oE2U3RdndfBO_-teOdII8GhOwfTXeeaapjhKG7c3mHbL7RORlfomDBoCx98QAvD_BwE#popup-1
Hi,i just had these codes yesterday all of a sudden(CEL),p2714 and p0751.the car was just shifting fine.i resetted the codes and drove with the car for like 16 miles.the car shifts good just like it should and always does and so far no CEL.any ideas?
Change the solenoid SLT first erase codes and drive more than 45 miles
Hola Daniel tengo código 2714 en 2010 Lexus gx460 tiene vibración cuanto cuesta este trabajo y donde esta tu taller ubicado gracias
will replacing the solenoid pack fix it or could it require a transmission replacement
If you have just this kind of code only replace the solenoid, but if you have more codes I recommend you replace your transmission
Where did you get the part
Toyota Dealer
How much would you charge to fix this on a 2006 Lexus is 250 have 3 codes p2714 p0781 and p0761 cuanto
$700 con todo y Los solenoid
@@danielscustoms13 como me contacto
@@guillermolopez-ql5dy danimecatronico@gmail.com
Buen dia,,, me aparece codigo 2714 en mi Toyota FJ Cruiser 2008, ya cambie filtro transmision y atf fluid y sigo con misma bronca, me pudieras dar numero de parte del solenoide SLT de mi carro, para conseguirlo???Gracias....Hector, Tijuana
Mándame el VIN a mi email danimecatronico@gmail.com así te puedo ayudar a conseguir el número de parte para ponerlo en la base de datos a ver qué nos arroja !! ✌🏼
I have the same P2714 code on a 2007 Lexus is250. Transmission doesn't slip and I do not notice any issues with gear changes. Where are you located? I would like to take my car to your shop. I am in Los Angeles.
I have this code and NO reverse. Is this the same solenoid that controls reverse?
No, is another part number!!
Yo tengo el mismo problema en mi 2007 Tundra, pudiste arreglar el problema con tu reversa?
@@danielscustoms13Hola, me gusta tu canal, yo tengo un 2007 tundra con el codo P2714 y P0761, la reversa no quiere enganchar, engancha cuando esta frio el fluido de la transmision y despues queda como en neutral.
Where can I get this solenoid for code p2714 do you have the part number ?
I recommend you Toyota Dealer OEM part # 35280-30050
Sir i have code p0761 p2714 p0894 and car don’t shift into 4,5and 6th gear should i replace solenoid or transmission. Pls help!
O man my Lexus is doing the same before I just unhook the battery and it would shift fine but now it dose not work
DId you ever figure this out? Mine does the same...
I’m the valve body wick one is it bro
Is it the same thing with PO761??
Hola Dani, te envié un email de parte de Elías Woodd. Dónde estás ubicado para reparar un Lexus ES 350 2008 con códigos P2714 C1201
i had no codes until i got my transmission fluid replaced today, and this code popped up...
Damn mala suerte you need to replace that solenoid valve but is very easy just remove the oil panel transmission and change the solenoid and that's it !!
Where’s the video on how to replace it?
Wow
How much would u charge to fix this on a Lexus is 250?
$500 parts and labor !! 👍🏼OEM parts
where is this solenoid located?
and whats the labor time to remove and replace?
inside to the transmission on the valve body assembly (rear left side, is the last solenoid installed on the valve body)
@@SqueakyBrakesLV 3.2 hours R and R !!
where are you located?
Los Angeles California
Whats the solenoid num for P2714 i need to replace that same one u just show it was not working
El dijo en un comentario q compres el OEM part# 35280-30050 en la toyota..
Where are you located? I need a mechanic who understands this!!
I got these codes after my gx460 transmission started suddenly slipping. I pulled the solenoid and it bench tested good. I did not ohm it out. Could it still actuate and ohms be out of spec?
Test the solenoid a lot times on bench I'm pretty sure that your solenoid is stuck open when is hot, I recommend you replace the solenoid, let me know!! 👍🏻
@@danielscustoms13 mine solenoid SLT are make buzzing noise when test with scantool and when test with 12v it's clicking. It is normal that buzzing noise on SLT? Got code P27137F too and can't shift to 4th gear
@@tetz8388 yes it's normal the clicking but try it a lot of times and check if is stuck on or off
@@danielscustoms13 i test it when hot then it make buzzing noise. Is that normal? Hear the noise from SL3 too. I cant shift to 4th gear
@@tetz8388 yeah I recommend you change just the solenoid D!!