Ford Ranger Complete Front Suspension Replace 1998-2011
Вставка
- Опубліковано 19 лют 2021
- Spring Compressor I used
• Maddox Strut Compresso...
Buy yours here
Lower Control Arms
amzn.to/3hHzZUv
Full Upper Control arm and Ball Joint Kit
amzn.to/3pIm6Ke
Front Shocks
amzn.to/3CfBbI2
Rear Shocks
amzn.to/36Vl8Ua
How to do a full suspension replace on the ford ranger or mazda b series truck. You definitely need a spring compressor for this job,
Due to factors beyond the control of Hank's Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Hank's Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Hank's Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Hank's Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Hank's Garage. - Навчання та стиль
That was cool how you showed the difficulties and the creative fixes.
On the issue with coil spring take the threaded rod with a large washer and drop it through the shock absorber hole and feed up the center of the spring. Attach it back with the hooks holding the spring in place in the frame.
The reason you put up with this pain-in-the-butt repair is that farming it out to a shop would likely cost over $1000 just in labor.
I just got a quote and you are correct. Plus an additional $1000 in parts which seems to be double the price if I purchased them myself.
I enjoy complete tear downs. Doing one part or just replacing bushings is the hard part. It can take as long to do bushings as it takes to do an entire side or even front end.
I agree, could have replaced the bushings in both arms but then would have to buy a press and the correct tools for doing it. Then they’d sit forever lol
@@hanksgarage_
I have done both as many friends and family just want to spend money on the bushings and have me do the labor free. 🤪
I used your video to get up to speed before attempting the job. I saw a comment about compressing the spring from the top through the shock absorber hole and it helped a lot.
If you do it this way than the spring just stays in place?
yeah the spring just stays in place. This tip is for re-assembly.
Good stuff only thing I do different is use my drill and swivels take yourself a lot of hand crankin
I really like the Slayer hoodie
Great work, sir! Thank you for another video!
Nice video. Showing all the adversity. Our video and editing styles are very similar. We're going through the front end of our 2wd 07 for Ranger right now and after seeing this great video I don't think we're going to film any of it. It would just be youtube redundant lol.
I would still film it. You may find ways to do things better here and there.
right into the repair. Love it
Excellent work, sir.
dang i hope i dont have to mess with my muffler. ive been picking up parts to do this myself. going to do the bearings as well though
If the control arm is in good condition you can press out the bushings and the ball joint and press new ones in... but it's a hell of a work
Good stuff, thanks man.
Would all this make a ranger ride “smoother”? I’ve got an 08 that feels like I’m driving an early 90’s car. Super rough ride
LOL....I see your musical preference! Metal head here too.
How often do you replace hub assemblies on Ford ranger of this year?
What’s the size of the bolt behind rotors
🔥Slayer🔥
🤘
I think I might’ve put my coil spring back in upside down, will it matter?
Any follow up after 2+ years? The previous owner of my Ranger had a front end kit installed, looks like the cheap kit you used. And after a year most of the black bushings were split wide open and all of the boots were cracked.
Great video! I have to replace my front suspension soon, what's the brand of the coil spring compressor you used?
ua-cam.com/video/j7XXqvzVmKE/v-deo.html
I did the upper ball joints on my Dakota and not sure what the hell I did wrong but I ended up having to take it into a shop cause they failed. Like you were saying not fun working on front ends of trucks. Do you get parts through an online source? Always seems to be way cheaper than local parts stores.
Yea these all came from Amazon. Sometimes I’ll go through rock auto and even less I’ll buy from autozone or oreilly.
Which parts kits did you need to purchase to do this? Just upper and lower control arms and two new shocks? Thanks!
in description
When it gets warm here in Ohio i have to put new back shocks on my truck
Hopefully not too much rust
FUCKING SLAYER!!!!!
Yup was at their last concert too
I dont mean to sound dumb but what would you call this type of Suspension
You don’t. It’s a valid question. On 98 to 2011 they used independent front suspension
www.therangerstation.com/tech_library/front_suspension.shtml
This is 98+ not 93+.
93-97 are i-beam front suspension
This is an easy job to do but a back breaking experiance.
The bolt…
The nut...