How to Replace Front Wheel Bearings 1998-2011 Ford Ranger
Вставка
- Опубліковано 29 лип 2024
- Buy Now!
New Wheel Bearing & Seal Kit from 1AAuto.com 1aau.to/ic/1ASHS00985
This video shows you how to install new front wheel bearings from TRQ on your 1998-2011 Ford Ranger. If you hear a grinding or groaning noise while your vehicle is rolling, it might have a worn out wheel bearing. A worn bearing can allow the wheel to wobble, creating a host of other issues. To save yourself from more headaches down the road, replace your bearing right away.
This repair was done on a 2011 Ford Ranger XLT 2.3L Extended Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obCI/1AXAA00013
• Pocket Screwdriver
• Pry Bar 1aau.to/o56/1AXAA00020
• 13mm Socket 1aau.to/obXY/1AXAA00015
• 15mm Socket 1aau.to/obXY/1AXAA00015
• 19mm Socket
• Bearing Race and Seal Driver 1aau.to/oI/1AXAA00038
• Brake Caliper Compressor Tool. Dual Piston. Pump Style. 1aau.to/oaM/1AXAA00289
• Brake Caliper Compressor Tool. Quad Piston. Ratchet Style. 1aau.to/oaU/1AXAA00278
• Seal Puller 1aau.to/om/1AXAA00040
• Metal Cutters
• Pliers
• 1/2 Inch Impact Gun 1aau.to/oxs/1AXAA00252
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/ob2z/1AXAA00016
• Torque Wrench 1aau.to/oa5k/1AXAA00044
• 1-1/16 Inch Wrench
• Bearing Grease
• Brake Parts Cleaner
• Cotter Pin
• Sandpaper
• Drain Pan
• Floor Jack 1aau.to/oar3/1AXAA00068
• Hammer
• Jack Stands 1aau.to/oaeb/1AXAA00065
• Pick 1aau.to/oY6/1AXAA00037
• Wheel Chocks
• Wire Brush 1aau.to/ow5/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
That was one of the very best "how to" videos I have seen on UA-cam. Very detailed and demonstrated every step necessary to get the job done. I only have one request, can you list the special tools you used to remove the seals and compress the calipers. Thanks for the great job on this.
That knuckle and caliper looks like it's been in the bottom of the ocean for 100 uears.😂
Thanks brother for giving me the confidence.
Need to know the name of those special pliers you used to take that cap off. Nothing I have is working. Just scuffing the sides badly.
What is the little brake shield looking thing that sits inside the rotors ? I want to order that with my rotors! Jumping my truck 60’ really did a number on the front end 😭🤣 suprised I only need one bearing and one upper control arm but replacing everything
Thanks so much for the guide! This video makes me glad I dont live in the rust belt 😳
what size is the cotter pin?
Nice video! Does it count for European Ford Ranger?
Do you need to bleed the brakes after this job? I’m looking to change my wheel bearings, rotors and brake pads
+@jpatty5964 We recommend bleeding the brakes. This helps to remove any dirt in the braking system.
Hey it's just like a boeing 787 imagine that
😮😮😮🤟
🫡💯👍👍👍👍👍👍👍👍