How to fix a leaking, dripping Delta faucet by replacing the o-rings, springs, seats, or cartridge.
Вставка
- Опубліковано 6 лют 2021
- This video covers how to fix a bathroom faucet leak. Replacement O-rings, springs, and seats are installed in a Delta two handle bathroom sink faucet to repair water leaking from under the faucet handles. It will also fix a leak from the spout. Replacement valve stems are also discussed. Danco replacement parts are identified and makes it easy to make sure the right parts are being used.
As always - Please like and subscribe. Thanks for your support.
-----------------------------------------------------------------------------------------
Here are the Amazon links for Delta faucet parts.
Basic seat and O-ring kit for Delta faucets:
Danco 88101 Repair Kit For Delta 2-Handle Faucet (O-rings, washers,& springs): amzn.to/3BQMVTc
Danco 80465 Repair Kit for Delta Handle Faucet Scald-Guard: amzn.to/3BL1CXQ
Complete repair kit including replacement stems:
DELTA RP17400 Two Handle Repair Kit - 133468 : amzn.to/3OhMebx
As an Amazon Associate I earn from qualifying purchases. Thank you for your support.
#plumbing #plumber #faucet - Навчання та стиль
Thank you. Perfect video and just what I needed to repair my long standing leak.
Good to hear it helped you. Thanks for watching and commenting.
Thank you for the up close footage of the spring and seats
Appreciate it!!! You just kept me from ordering a $400 faucet set
Thank you!!!! That tiny hole where the allen wrench goes is what tripped me up. I couldn't see it well enough with a magnifying glass and even a light to tell if it was a screw or not. This saved us from buying a whole new faucet appliance!
I’m glad to hear that it saved you from buying another faucet. Thanks for watching it.
If you purchased this Delta faucet, all of that should be covered by the lifetime warranty. I have one exactly like it except it for a dry sink. They sent the parts to me F-R-E-E. The whole cartridge... not just parts. Fortunately I had registered it and found the date of purchase. Great video regardless.
Thanks for watching and the tip.
Thank you! I have the very same problem with my Delta faucet. Gonna head to HD this weekend
I had to actually replace the stem..no big deal. Thanks again for the video.
Video is pretty good. I had a sink with no stop, going to fix it now!
Very nicely done. Thank you for posting. Appreciate your time.
Great explanation!! Thx for taking time to make!!
Good video , going to fix mine this weekend
Thank you so much for this video!! 👍
You are so welcome!
Thank you !
Nice 👍
Thanks for watching and commenting. Glad it was helpful.
Thanks!
Welcome!
Thanks man
You're welcome!
Help! I can’t pull of the base of the handle. My Delta faucet was leaking hot water from the spout, so I turned off the hot water to the faucet. I removed the set screw, but the base of the hot water handle simply will not come off. I noticed you got yours removed at 1:00 minute in, but mine just won’t lift off. I’ve sprayed it with penetrating oil and still it won’t budge.
I previously, a couple of years ago removed the handle on the cold water side in order to replace a washer when the cold water was leaking, so I know this base should just come up and off, but it is not moving.
Strangely enough, now that I have sprayed the hot water base with penetrating oil, now when I turn on the COLD water that causes water to leak out beneath the HOT water handle base. This is a very odd symptom.
How can I get the base of the hot water handle to come off?
Mine was difficult to remove too. Sounds like you are doing the right thing with the penetrating oil. I would let it work longer and see if that helps. After that, I would gently tap it, or keep pouring hot water on the handle to expand it and hope it breaks lose. Good luck with it.
What size Allen wrench did you use for this repair?
Sorry but it has been a while and I don’t remember the exact size.
@@FixItDepot No problem thanks I figured it out
3/32 nd
.80 cents at ACE hardware.
Do you have a link or part number for the replacement valve stem? I have exact same faucet. Thanks!
Sorry I don't have that number.
How did you remove the spring and gasket from the main base?
just use needle nose plyers to grab it and it should come right out.
Did you put it back in with the needle nose plyers as well? I can’t get it back in 😂
Hey, is it possible to take the lift rod out of the faucet? Like completely? I’m trying to clean inside the faucet part. I removed the faucet, just don’t know how to get into it
If you are talking about the rod that controls the plunger, it can be removed. Should be a clamp under the cabinet holding on to the rod. It is easy to remove.
Will the nozzle come off like the handles once the allen screw is removed? My nozzle is leaking underneath the plywood decking where the water line connects.
The main nozzle cannot be removed. Sounds like it might be leaking where the water line connects to the faucet. Try looking from beneath the cabinet to see if you can spot the leak. Might end up pulling the complete faucet out. Good luck.
my handle will not line up for on and off
If set screw is not moving what to do
Sometimes they get stuck from calcium or other buildup over the years. Try spraying it with WD40 oil and let it sit for a while. Sometimes that doesn’t work either and not much more you can do except drill it out.
LIQUID WRENCH 🔧
Cant open handle Allen wrench is moving free no clue what to do
WD-40, LIQUID WRENCH 🔧
Man I can't fit the black seat back in the hole with the spring! Not even the old seat! I don't get it!
If it came out, it should go back in. hope you got it fixed.
It's a HEX Key, NOT an Alan Wrench.
Thanks for the feedback and for watching.
No its alen wrench
You can call it what you want. Personally I name all my keys and wrenches. That particular size I called Frank,
Dude use a proper size wrench
Nothing wrong with using channel locks.