Good to see you wearing a mask pulling out the mouse nests, Dalton at Pole Barn Garage wound up in the hospital with a virus from cleaning out mouse and rats nest from a vehicle without wearing a mask.
Way too often I see these car channel guys not taking care of their health and safety when working on vehicles old and new. Airborne viruses are no joke and can kill. Anytime there is dust or particles floating in the air, PPE gear should be worn. Brake dust lodged in the lungs, chemicals can be absorbed into your bloodstream through the skin can cause cancer etc. Always remember, safety first.
My first car was a 71 Duster with a 318 I bought for a few hundred bucks from my girlfriends dad in 1979. What a great car. Drove it until the wheels fell off, bought new wheels and sold it to a buddy.
Stay Tuned recently did a turbo on a slant six in a dodge pickup, worked out great! btw….best to wear eye protection when under a rusty car dropping a gas tank for example…..only get one set of eyes
I remember back in the day that Mopar 225ci slant sixes were decent performers for what they were. You used to be able to get a lot of performance enhancing parts for them as I remember. Really turning out great looking considering how inexpensively you are getting things done. Kinda makes me want one!
Hats off to you guys for going with the turbo ! So much more interesting than an engine swap. My 1973 duster is a slant six too. If I had a dollar for every time some guy said , ‘you should swap in a v8’ I’d have a tall stack of money. I will probably leave mine alone. Gonna keep it the way god and Detroit built it.
The car looked okay at the start, but now, it's an absolute beast now. It looks completely different, especially with the grille being replaced, giving its iconic 'face' again. What a transformation!
I like that you call it forgotten and neglected instead of abandoned.... abandoned is the most overused word on UA-cam. The old Duster is looking great for it's age. Thanks for the video.
The old Duster looks awesome with the black hood and orange wheels. I can't wait to see what the turbo does to it! I'm glad y'all didn't pull the slant six.
Just goes to show you that any car cleaned up looks so much better. I used to like detailing my cars when I was younger. I'd spend a whole day on it. We had mostly Mopars in our family and a few of them were A bodies with both the slant six and 318. Great cars. Keep up the great work. Looking forward to the next segment.
Absolutely love to see you work together. Try using adhesive remover with lower rpm. Too much heat may damage paint coat, just a tip for future projects. Keep up the good work!
I love watching these classic muscle cars being saved from the crusher. I truly enjoy seeing the relationship you have with your dad, and making these videos together.
Awesome car!!! I just bought a 71 3 weeks ago Drug it out of a old salvage yard. Been off the road for 30yrs! Can't wait to get it on the road again!! Keep up the good work! Love watching your videos
This brought back a lot of old memories for me. I graduated High School in the early 70's and just about every kid had one of these cars! So it was nice to see that your brought it back to life! Will keep watching to see what else you do to it to make it pop!!!
My Grandfather’s first car was a 1972 Duster with the 225 slant six. During the late seventies he put a.275 duration cam in it along with long tube headers and a limited slip rear end with 3.73 gears. As well as a much larger carburetor!
Definitely preserve your work by doing ceramic coating. The technology is improving and getting more reasonably priced. Go for it. And yes to dog dish hubcaps, and Hell YES to that turbo!!
Try using a P2000 sanding paper instead of P1000. It’s finer grit so should hopefully leave less scratches. Also keep the paper/disk flat to avoid digging into the paint. Love your stuff genuinely great entertainment!👍👍👍❤️❤️❤️
no ceramic but WELL WORTH the investment in touchup paint. Get a pint of single stage and an air brush. EDIT I did not see you do it but it looks like you did spray some damage areas around the trunk...nice!!
I love the decision to wrap the hood, the paint really makes it pop. I think it would look pretty mean if it had the black stripes down the sides like the 340 dusters had. Also can't wait for the turbo install!
I like to see you guys finish that interior headliner and all boy that dashboard is bad. But yeah unbelievable job turning that pain around. I would get some black hubcaps that would match the hood
Good morning from Cape Cod ⛵ my mother had a 74 Gold Duster with the alligator vinyl top and the fold down rear seat. Yes it was a 225 underpowered turkey 🦃 that's comparing it to my father's 71 Buick wildcat with a 455, and my grandfather is 63 Impala with a 409. With that said I suppose the duster turned out to be dependable cuz they get rid of it at 316,000 mi. Your duster is surprisingly rust free considering how badly mopars rust. You guys are doing an awesome job ✌️🇺🇲
turbo 6 will be cool on this. I'd also like to see a manual trans and toss some bucket seats into the interior. if you could find a center console that fit... sweet!
Hell Yeah ! I was just thinking turbo when you said it . That should be a little screamer . Thank You for sharing your video, and letting us hang out .
Great job sprucing up the car, she looks nice. Get the Duster side and rear stripes with the duster logo. A 3 or 4 speed manual would be nice if you can find for a reasonable price. Some Cragar or factory Mopar Ralleye wheels would make it pop. Usually the small bolt pattern Ralleye wheels can be had for a reasonable price.
If you could get injection kit for it that would go great with turbo. Also, keep exh manifold as short as possible before turbine inlet, as well as ducting from compressor to engine inlet. That way you'll minimise lag and boost the power more efficiently.
I remember a stunt car group called The Hell Drivers I saw when I was a kid and they used a fleet of Mopars like this. Car looks great; didn’t think the paint was going to shine up like that. My suggestions would be to fix the rusted out spots and retouch them. Also, for the turbo make sure the bottom end can take it; I believe the compression ratio needs to be lower as well so that would have to be looked into to make sure the thing survives.
The precision in your work is truly remarkable. From the engine rebuild to the flawless paint job, every step showcases your expertise and passion. Watching this restoration felt like witnessing a piece of art come to life
Great job on the seventy one duster.. You guys made it look really good When you buffet it out and fixed the hood.. Great videos. Great job, I think the Turbo will be great for the Car.. Maybe a set of 3:55 gears would be good too. Great job great videos. Until I see you guys in the next video putting the Turbo on...👍🙏I had a 1974 360 dodge dart sport Space package in 1980's It ran 13.00 In the quarter mile at 106.65 mph.. Again, nice car. Great videos. Great to see you guys working on old cars. That's great..
I was SO hoping you would choose to turbocharge the six... and I am SO pleased that you did not let me down! I am really looking forward to seeing how you do it. Tony Angelo just did a Turbo build on a slant-six on his Stay Tuned channel. If yours turns out like his, that duster will smoke tires, for sure!
When you are wrapping something you should have soapy water under the wrap so you can get all the bubbles and wrinkles out of it then it can get sweegie it out it also makes it a-lot easier too.
Looking Good!, A set of Doggie Dish Hubcaps would look really nice!, Like the Cable Conversion Kit for the TV/Kickdown too!, Wish they had those back in the day when I swapped to a Holley 4bbl on my 1970 Chrysler 383!, Took lots of tweeking on that Linkage to get it shifting right!
Good to see you wearing a mask pulling out the mouse nests, Dalton at Pole Barn Garage wound up in the hospital with a virus from cleaning out mouse and rats nest from a vehicle without wearing a mask.
Dalton smokes heavy too...so....best wishes to him tho...but really...
@59vaughn Yep, his respiratory system was already challenged with that and now the infection. Hoping he'll feel better soon.
Junta Virus? He never said. I wish he would quit for himself, Jess, and JD.
Paint turned out pretty amazing
Way too often I see these car channel guys not taking care of their health and safety when working on vehicles old and new. Airborne viruses are no joke and can kill. Anytime there is dust or particles floating in the air, PPE gear should be worn. Brake dust lodged in the lungs, chemicals can be absorbed into your bloodstream through the skin can cause cancer etc. Always remember, safety first.
After watching stay tuned turbo the slant six I got excited as soon as I saw the box of manifold parts.
I've never seen a slant six with a turbo. I am looking forward to that. This one is really cool and fun.
My first car was a 71 Duster with a 318 I bought for a few hundred bucks from my girlfriends dad in 1979. What a great car. Drove it until the wheels fell off, bought new wheels and sold it to a buddy.
Love to see that thing with a turbo. Great video as always. The 6 cylinder cars must be saved.
Stay Tuned recently did a turbo on a slant six in a dodge pickup, worked out great! btw….best to wear eye protection when under a rusty car dropping a gas tank for example…..only get one set of eyes
Finds some Cragar SS wheels. Completes the 70s look.
Or Wolfrace's. I somehow wished someone would make real wheels out of Matchbox' Superfast Wheels designs...
The paint turned out great for what it was. Can’t wait to see how the turbo install turns out!
I am so excited to see you install the sushi slicer on the duster.🇺🇲💪
I remember back in the day that Mopar 225ci slant sixes were decent performers for what they were. You used to be able to get a lot of performance enhancing parts for them as I remember. Really turning out great looking considering how inexpensively you are getting things done. Kinda makes me want one!
Love this duster. Good plan on the turbo for that straight 6. Great project
You just can’t beat the leaning tower of power 👍🏻👍🏻
Did you watch stay tuned turbocharge one?
Can’t wait to see this thing with a turbo!!!
Lovin your videos....In 1972 I bought a 1968 dodge charger rt 440 while in the air force..I loved that car...keep on doing your thing man
Crazy how that old paint polished up. I think some hub caps would look noice!
"Crusty old Duster" is now dubbed "The Cruster!"
The Cruster!! Yea
@@S2NAZI don't think so
@@greghanlon2235 Haha 😅 I like it!
Was thinking the same thing!
@@mikemarak2613 Great minds think alike. lol.
A piece of that black wrap on the tail panel would look nice!
@@DarkFlamage I agree!! Good idea 😃
@@BudgetBuildz Might look cool to black out all the trim and bumpers. although the bumper do look great now. Maybe wrap them as well?
Yesss!👌😎👍
Those old slant six engines were tough as nails. I used to see old slant six taxi cabs with slant six and bald tires run forever.
Hats off to you guys for going with the turbo ! So much more interesting than an engine swap. My 1973 duster is a slant six too. If I had a dollar for every time some guy said , ‘you should swap in a v8’ I’d have a tall stack of money. I will probably leave mine alone. Gonna keep it the way god and Detroit built it.
The car looked okay at the start, but now, it's an absolute beast now. It looks completely different, especially with the grille being replaced, giving its iconic 'face' again. What a transformation!
More power!! Fun little car! Thanks!!
My friend had the GM version, an orange Chevy Nova.
You did an amazing job on the paint!
I don't know how I missed this! Loving the updates on this buzzin' half dozen!
I like that you call it forgotten and neglected instead of abandoned.... abandoned is the most overused word on UA-cam. The old Duster is looking great for it's age. Thanks for the video.
Thanks for another , Brothers !
saw a BIGFOOT in the treeline across the road
Right 😂
Now that was unexpected.... Can`t wait for the next installment
The old Duster looks awesome with the black hood and orange wheels. I can't wait to see what the turbo does to it! I'm glad y'all didn't pull the slant six.
The black hood is a nice touch!
Good Job on that Duster!!!😊
Baby moons and beauty rings. Would be perfect
Frieburger and dulcich would love this car 👍
Brother, 4 in the floor straight 6! Perfection.
My 92 Sierra truck had the 4.3 and 4 on the floor with overdrive
but it's not a straight 6..it's a slant 6
@@janeames1513the slant is better in all comparison to a straight.
I know the factory loved to do an off color on the hood but I think the cars look better when you paint he cowl the same color as the hood.
Absolutely. The upper cowl panel needs to be black.
Absolutely LOVE the duster. Have always liked them. I had a yellow one years ago. Turbo on a slant six will be awesome, can't wait to see it.
I absolutely love what you are doing with this car!!
So much fun watching these rescues! Congrats!!
Liberty Insurance: Only pay for what need! Love it man! Awesome work!
Just goes to show you that any car cleaned up looks so much better. I used to like detailing my cars when I was younger. I'd spend a whole day on it. We had mostly Mopars in our family and a few of them were A bodies with both the slant six and 318. Great cars. Keep up the great work. Looking forward to the next segment.
Eviction day!!! Bye mouse house. This car is so good. I love it. For being a die hard Chevy guy I always liked 70's dodge cars .
Absolutely love to see you work together. Try using adhesive remover with lower rpm. Too much heat may damage paint coat, just a tip for future projects. Keep up the good work!
I love watching these classic muscle cars being saved from the crusher. I truly enjoy seeing the relationship you have with your dad, and making these videos together.
Some blacked out baby moons would be cool!!!
When you pulled out that turbo flange... hell yeah!!!
Watch Stay Tuned they just did a turbo on a slant six!!! Duster looks great! I can’t believe the shine you got!!!
Your dad standing over there like he really don't want to wet sand today . Funny .
Yeap 😅
Awesome car!!!
I just bought a 71 3 weeks ago
Drug it out of a old salvage yard.
Been off the road for 30yrs!
Can't wait to get it on the road again!!
Keep up the good work! Love watching your videos
Love the little merc coup you got there TASTY 😂
This brought back a lot of old memories for me. I graduated High School in the early 70's and just about every kid had one of these cars! So it was nice to see that your brought it back to life! Will keep watching to see what else you do to it to make it pop!!!
Hi Mike and his Dad nice video 📹 and workmanship the car looks good !!! Nice future parts to
Van Deisel Diesel ⛽️ Parts
Yes, my eyes lit up on the turbo. I love that car.
Turbo, Yeah baby !
My Grandfather’s first car was a 1972 Duster with the 225 slant six. During the late seventies he put a.275 duration cam in it along with long tube headers and a limited slip rear end with 3.73 gears. As well as a much larger carburetor!
Header .... singular
@@petefroehling8704 Sorry, I am used to using V8 lingo.
@@PontiacFirebirdFormula305WS6 it's ok you might be right though when he's under the car I see 2 collectors maybe it's a two piece header
Can't wait to see the turbo install. A manual and a more aggressive rear end (w/ an LSD) would make this car pretty awesome
I can’t believe the difference in the paint,amazing.
Big difference after the buffing, great job!....... can't wait for the turbo.....
You and your dad are so good at fixing up old cars and stuff. I love old dusters. They are so cool.
Turbo! awesome, Tony just did that on Stay Tuned, quite the results, paint cleaned up well!
Definitely preserve your work by doing ceramic coating. The technology is improving and getting more reasonably priced. Go for it. And yes to dog dish hubcaps, and Hell YES to that turbo!!
My humble opinion…. Dog Dishes & 4 speed!!!!!! Loving this build it looks so Rad!!!!
Try using a P2000 sanding paper instead of P1000. It’s finer grit so should hopefully leave less scratches. Also keep the paper/disk flat to avoid digging into the paint. Love your stuff genuinely great entertainment!👍👍👍❤️❤️❤️
TURBOOOO! So glad you are keeping the six!
The leaning tower of turbo power, can’t hardly wait for that. 😂👊
You definitely knocked off some of the old man look from the Duster, rejuvenating it!
no ceramic but WELL WORTH the investment in touchup paint. Get a pint of single stage and an air brush. EDIT I did not see you do it but it looks like you did spray some damage areas around the trunk...nice!!
That paint looks amazing! Great job!
We wanna hear your pops talking more! I just bet he's got a lot of that old school knowledge about cars wed all love to hear;?
Decals, interior makeover, and Cragars!!
Wow that my friend is a hell of an improvement. That is the money shot right there
Wow you guy's this is why i love this Chanel ....greetsz from friesland..max....
Turbo is a great idea...lots of sixes out there that are perfectly serviceable, just need some boost!
I love the decision to wrap the hood, the paint really makes it pop. I think it would look pretty mean if it had the black stripes down the sides like the 340 dusters had. Also can't wait for the turbo install!
Enjoy seeing you take time to do things right.
If cars could show gratitude, this one would be smiling😂
Y’all did a great job on bringing the Duster back!
great job, Farecla is the compound to use, its not full of additives, expensive but specifically designed for what your doing.
I like to see you guys finish that interior headliner and all boy that dashboard is bad. But yeah unbelievable job turning that pain around. I would get some black hubcaps that would match the hood
Good morning from Cape Cod ⛵ my mother had a 74 Gold Duster with the alligator vinyl top and the fold down rear seat. Yes it was a 225 underpowered turkey 🦃 that's comparing it to my father's 71 Buick wildcat with a 455, and my grandfather is 63 Impala with a 409. With that said I suppose the duster turned out to be dependable cuz they get rid of it at 316,000 mi. Your duster is surprisingly rust free considering how badly mopars rust. You guys are doing an awesome job ✌️🇺🇲
This is going to soo much fun to watch ❤
I have a 74 Duster, good to see this one back to life.
Put a turbo on it. They go really well. Yes!! Should have waited till the end!
I love this Duster. What a sweet little car!
turbo 6 will be cool on this. I'd also like to see a manual trans and toss some bucket seats into the interior. if you could find a center console that fit... sweet!
Stay Tuned just turbo'd a slant six. Kind of rowdy in a truck.
it needs interior work more then a manual. The dash pad is horrible.
Hell Yeah !
I was just thinking turbo when you said it .
That should be a little screamer .
Thank You for sharing your video, and letting us hang out .
Great job sprucing up the car, she looks nice. Get the Duster side and rear stripes with the duster logo. A 3 or 4 speed manual would be nice if you can find for a reasonable price. Some Cragar or factory Mopar Ralleye wheels would make it pop. Usually the small bolt pattern Ralleye wheels can be had for a reasonable price.
If you could get injection kit for it that would go great with turbo. Also, keep exh manifold as short as possible before turbine inlet, as well as ducting from compressor to engine inlet. That way you'll minimise lag and boost the power more efficiently.
Yes a ceramic coating is the way to go. I use Adams graphene. It is amazing stuff and will protect the paint for years with the right maintenance.
I remember a stunt car group called The Hell Drivers I saw when I was a kid and they used a fleet of Mopars like this. Car looks great; didn’t think the paint was going to shine up like that. My suggestions would be to fix the rusted out spots and retouch them. Also, for the turbo make sure the bottom end can take it; I believe the compression ratio needs to be lower as well so that would have to be looked into to make sure the thing survives.
I have been flipping cars for 40 years. Single stage red and orange always polish out nice.
That thing looks sharp.
I used armor shield on my vehicles. Love it. Cheaper ceramic coating, but holds up well.
The precision in your work is truly remarkable. From the engine rebuild to the flawless paint job, every step showcases your expertise and passion. Watching this restoration felt like witnessing a piece of art come to life
Nice car. Like everything you’ve done apart from painting the wheel rims orange. Turbo - oh yes
The Duster looks great, trim rings and dog dish hub caps! I’d drive it for sure!
Great job on the seventy one duster.. You guys made it look really good When you buffet it out and fixed the hood.. Great videos. Great job, I think the Turbo will be great for the Car.. Maybe a set of 3:55 gears would be good too. Great job great videos.
Until I see you guys in the next video putting the Turbo on...👍🙏I had a 1974 360 dodge dart sport Space package in 1980's It ran 13.00 In the quarter mile at 106.65 mph.. Again, nice car. Great videos. Great to see you guys working on old cars. That's great..
Loved the way the car turned out. Really didn't expect the paint to come out like that!
I was SO hoping you would choose to turbocharge the six... and I am SO pleased that you did not let me down! I am really looking forward to seeing how you do it. Tony Angelo just did a Turbo build on a slant-six on his Stay Tuned channel. If yours turns out like his, that duster will smoke tires, for sure!
When you are wrapping something you should have soapy water under the wrap so you can get all the bubbles and wrinkles out of it then it can get sweegie it out it also makes it a-lot easier too.
Looking Good!, A set of Doggie Dish Hubcaps would look really nice!, Like the Cable Conversion Kit for the TV/Kickdown too!, Wish they had those back in the day when I swapped to a Holley 4bbl on my 1970 Chrysler 383!, Took lots of tweeking on that Linkage to get it shifting right!
A nice big ''225'' sticker diagonally on the hood that's all that's missing with dogs dish hubs caps of course.