Replace the Backup Battery in your ADT Security System: Safewatch Pro 3000 Tips!
Вставка
- Опубліковано 17 жов 2024
- 🔋 Keeping Your Security Strong: DIY ADT System Battery Replacement 🔒
Welcome to @DaveCarolson! In this video, I'll show you how to replace the battery in your ADT Security System where the system battery is in the panel control box (such as the Safewatch 3000). It's a straightforward process that ensures your security setup remains effective. By following these steps, you can maintain the reliability of your system and keep your peace of mind intact. 🏠🔑
A well-functioning security system is a cornerstone for any home, and replacing the battery is a routine task to ensure its consistent operation. Don't worry - I'll guide you through every step to make this process a breeze.
🔌 The Battery You Need:
Here is a link to the battery I purchased on Amazon: amzn.to/47lXScH
As an Amazon Associate I earn from qualifying purchases
Replacing the battery is a proactive measure that keeps your security coverage intact, especially during power outages. It's an essential DIY skill that empowers you to maintain your security system without hassle.
Whether you're a DIY enthusiast or simply looking to maintain your home security efficiently, this tutorial is designed to help you through the process with ease.
🏡 Join Me in Strengthening Home Security with @DaveCarolson!
I'm dedicated to providing practical solutions for enhancing your home's safety. From maintenance tips to DIY projects, my goal is to empower you with the knowledge you need. Be sure to subscribe and hit the notification bell so you don't miss out on my latest videos.
🔋 Keep Your Security System at Its Best!
Maintaining your ADT Security System doesn't have to be complicated. Watch my tutorial now and ensure your home security is always up to the task.
Watch the full video here: [Link to Your Video]
#ADTSecuritySystem #BatteryReplacement #HomeSecurityDIY #DIYHomeProjects #HomeSafety #SecurityMaintenance #DIYTips #HomeImprovement #PracticalSolutions #HomeSecurity #DaveCarolson
Now, a quick legal note: My videos are for entertainment and education, not professional advice. I'm a jack of all trades, not a certified expert, so use my knowledge responsibly.
Sponsored videos are labeled; my opinions are authentic.
Affiliate links in the description support the channel.
Prioritize safety, follow manufacturer guidelines, and local regulations.
I'm not a lawyer, so consult one for legal matters.
Respect copyright; reach out to resolve issues.
Keep the comments friendly.
Thank you so much! I thought the batteries were in the panel and could not figure out where the batteries went. Thank you so much.
You are welcome! Thanks for watching!
the sudden music at 1:09 just fucked up my ears 😂
Sorry about that!
Exactly damn!! Helpful video though
I just replaced my 12v 7a battery but still get the system low battery indication. Does it take a while to charge?
Also, what is the smaller 12v 4a battery ?
I don't know much about this but from the other videos I checked out, they all said that it may take a few hours for it to recharge. One person even said to give it about 12 hours. Also, toward the end of this video, the man said that it will take about 48 hours to recharge. I hope this helps.
Hi. Yes. Mine took a while to charge up after I changed it. I do not have a 4 amp battery in mine so I am not sure about that. The system can be installed in different ways it seems. I would call ADT or your provider and ask them.
@@DaveCarolson That was a lie, There was 2 batteries in your panel
@mrmaddocs68752 I guess you are right. There is a 12V 4 amp in mine. I forgot about that.
Thank you for this. My client is away and her panel is beeping. I cannot find box. Is there a way to shut the beeping off at panel
Hi. Thanks for the comment! I entered my code and hit “off” and that worked for about 24 hours. If you have a different system check here: help.adt.com/s/article/silence-low-battery-beeping
@@DaveCarolsonthanks I just entered my code and off and the beeping stopped. Thanks to the person who asked to.
Is it that simple??? Saw other videos where they do alarm trst mode or go into the adt app.
Yep! That’s all I did and my system has been working like a charm ever since. Good luck!
@@DaveCarolsonthank you!
Thank you. That was helpful
Glad it was helpful!
Please show us how to silence the voice . There’s lots of videos on how to disarm chime. But i want to turn off the voice too. Thanks
Hi. Thanks for the comment. When I did this, it silenced the chime and the voice. Did it not silence the voice for you?