Its a killer combo! Feel Free to Message us with any questions if you need advice or a quote on any parts, builds, installs, or dyno, email tuning. Here is a link to our Facebook Page. Link: facebook.com/automafiaracing
Man. I watched this video so many times. I just grab a beer and watch and retain as much info as I can. Cause I know I'm gonna install this one day. Can't wait dude.
Finally lol I’ve watched the s197 and was waiting to see it installed in my exact platform. This will be the biggest thing I end up doing on my channel in the future. At first the pro charger was the only real way to go but you guys definitely gave us a new choice
Best choice for boost on the market! Feel Free to Message us with any questions if you need advice or a quote on any parts, builds, installs, or dyno, email tuning. Here is a link to our Facebook Page. Link: facebook.com/automafiaracing
both valve cover ports we suggest installing our VTA DVCC catch can on. Thats 1 catch can that goes to BOTH valve covers. automafiaracing.com/products/mafia-vta-catch-can
Gee do ya think im watching this video? You are doing a great job very very nice pacjage. But of course i have another question. I personally have had the idea of a pump for the oil but i had it for a rear mount turbo where it would have its own 2 qrt resv. Have the oil exit the bottom of the turbo and then into the pump up into the trunk or hatch area where it would feed into a 2 qrt reservoir and then gravity feed back into the turbo. Of course to really take advantage of the idea maybe run it through a small trans cooler then into the reservoir. Hopefully by doing that you keep the over all temp down on both sides of the turbo. And im sure but i think the turbo oil would run hotter than the motor oil so by keeping that oil from going back into the motor it would run cool. That is my thought anyway ?? much higher temp
What is up with the bracket you guys did for the inner cooler? Maybe im lacking an over all view of where it went. But it looks like maybe half the inner cooler is behind the crash bar. What if you shorten the bracket and bring the cooler about 6 inches. Seems then only 10 % or so would be behind the crash bar. Ahh just thinking ..ahhh how about doing some breathing holes in the bumper cover and the crash bar ?? I know about 8 guys just cringed at the thought of cutting holes in a bumper cover. Well im one of those function over form first guys.
I understand the engines are assembled differently in the stang than taurus but if I were to ship my awd 15 taurus out to Florida would this kit be do able ?
We can put it together yes. 📬 Contact AMR for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Ok i have a question. What is the ported intake worth in hp #'s vs a nonported intake. ? I would think match porting on both sides of the head, and the throttle body ( yes i know a lot more work) would be a much better investment for horse power, gas millege and over all efficiency. The ported intake can be over come with another half pound of boost. As to the match porting of the throttle body to intake , intake to intake port and exhaust port to headers is to me a better mod maybe explain this to your customer and see if he would be game on doing a couple of pulls on the dyno before and after .
Port matching and porting is always going to make power. The more you do to make it all match the better your flow and the kore efficient power you get
With enough time and money and effort anything is possible. 📬 Contact AMR for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 Support@AutoMafiaRacing.com www.automafiaracing.com
I've sold my stock manifold when I purchased a set of BBK long tubes will there any difference in power gains if you ditch the stock ones to a bbk shorties?
@@automafiaracing Well, damn... I just ordered my kit and was hoping to have the custom Y pipe made for the BBK long tubes I currently have on it. Guess I'm buying shorties now. 😂
sell the long tubes. Feel Free to Message us with any questions if you need advice or a quote on any parts, builds, installs, or dyno, email tuning. Here is a link to our Facebook Page. Link: facebook.com/automafiaracing
It isn't necessary to add a boost gage. All S550s have one built in. Here is a video that shows you how to do it. The link is ua-cam.com/video/1-8F1Tr2slc/v-deo.html.
Order it from our website. Link: automafiaracing.com/2015-2017-3.7-l-v6-mustang-mafia-single-turbo-kit-450-670-rwhp-with-epa-approved-catted-y-pipe-/p120065
2 things, 1. Please cut the zip ties sideways. Cutting them flat with the width makes the edges sharp, cut them sideways please as a safety measure. 2. Heat guns are cheap. Order one online and do the heat shrink right. You are installing a 5k turbo kit, using a 99 cent bic lighter.
2 things. 1. Flush cuts dont leave them sharp. 2. Heat is Heat. We have heat guns but most dont. Showing how to do it without a Heat gun is for the customers installing at home. Also it works just as well.
Sadly soon all gas cars will be banned in EU and USA! In France they have a new banning law for ICE cars called SCHLABOUBVE and in Switzerland the HESCHLAVVO law! In Scandinavian countries soon there will be a so called SMORVEBIDEN law)
A very significant breakthrough for the 3.7L s550 Community, gonna be sharing this video for sure 👍
Its a killer combo!
Feel Free to Message us with any questions if you need advice or a quote on any parts, builds, installs, or dyno, email tuning. Here is a link to our Facebook Page. Link: facebook.com/automafiaracing
Man. I watched this video so many times. I just grab a beer and watch and retain as much info as I can. Cause I know I'm gonna install this one day. Can't wait dude.
You can do it!
@@automafiaracing ❤️
Finally lol I’ve watched the s197 and was waiting to see it installed in my exact platform. This will be the biggest thing I end up doing on my channel in the future. At first the pro charger was the only real way to go but you guys definitely gave us a new choice
Best choice for boost on the market!
Feel Free to Message us with any questions if you need advice or a quote on any parts, builds, installs, or dyno, email tuning. Here is a link to our Facebook Page. Link: facebook.com/automafiaracing
We're can I buy the turbo kit? I have a 2016 mustang v6 3.7
@@jesusbarajas7799 get on there website.
Who is ready to get the newest turbo kit on the market for the 3.7?
.
me!
WOO!
what are you waiting for?!
pricing info! any way there’s a pm on youtube if not I can get on contact with you on facebook my name will show up as levi
@@automafiaracing you’re in south florida? i’m in north central FL
nice! I like all the step by step instruction, This kind of videos help car tunning community to grow 😃
We do our best to help. It's a ton of work and time but we think it's worth it
Now we need the dyno video!!!!! Can’t wait to see how much horsepower this can make
Soon! We are building a motor and going for 800 rwhp
Hell yeah! Can’t wait to see people get these kits, they will enjoy them
They are shipping out!
Did they mention what to do with the valve cover side of the PCV?
I notice it was open to the atmosphere at the very end. Won't that get little bits of oil everywhere?
both valve cover ports we suggest installing our VTA DVCC catch can on. Thats 1 catch can that goes to BOTH valve covers.
automafiaracing.com/products/mafia-vta-catch-can
Gee do ya think im watching this video? You are doing a great job very very nice pacjage. But of course i have another question. I personally have had the idea of a pump for the oil but i had it for a rear mount turbo where it would have its own 2 qrt resv. Have the oil exit the bottom of the turbo and then into the pump up into the trunk or hatch area where it would feed into a 2 qrt reservoir and then gravity feed back into the turbo. Of course to really take advantage of the idea maybe run it through a small trans cooler then into the reservoir. Hopefully by doing that you keep the over all temp down on both sides of the turbo. And im sure but i think the turbo oil would run hotter than the motor oil so by keeping that oil from going back into the motor it would run cool. That is my thought anyway ?? much higher temp
That would work. Just more complicated
What will I need to do before I boost my ride forged pistons, new fuel pump? Can you list the things please that would be great
Our complete turbo kit comes with everything needed including fuel system. You just need a tuning device to load the tune is all
Any twin turbo kits for the S550 2017 V6 Mustangs?
Not needed. Just more money to go the same speed and make the same power.
What is up with the bracket you guys did for the inner cooler? Maybe im lacking an over all view of where it went. But it looks like maybe half the inner cooler is behind the crash bar. What if you shorten the bracket and bring the cooler about 6 inches. Seems then only 10 % or so would be behind the crash bar. Ahh just thinking ..ahhh how about doing some breathing holes in the bumper cover and the crash bar ?? I know about 8 guys just cringed at the thought of cutting holes in a bumper cover. Well im one of those function over form first guys.
Not needed. Intake Temps are plenty cool
Is a ported air intake manifold important to buy or just feeling fancy?
we highly recommend it
I understand the engines are assembled differently in the stang than taurus but if I were to ship my awd 15 taurus out to Florida would this kit be do able ?
First we are in Montana now.
2nd. No. It would be a completely new custom kit. We can do it for about $15,000.
Nice but it already has a gauge mode for the turbo it's just together with the vacuum gauge
Yes on the dash. This onces a bit easier to read
Is the full kit still offered? I only see the tuner kit on your guys' website
We can put it together yes.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Ok i have a question. What is the ported intake worth in hp #'s vs a nonported intake. ?
I would think match porting on both sides of the head, and the throttle body ( yes i know a lot more work) would be a much better investment for horse power, gas millege and over all efficiency. The ported intake can be over come with another half pound of boost. As to the match porting of the throttle body to intake , intake to intake port and exhaust port to headers is to me a better mod maybe explain this to your customer and see if he would be game on doing a couple of pulls on the dyno before and after .
Port matching and porting is always going to make power. The more you do to make it all match the better your flow and the kore efficient power you get
sheeeesh i know where my tax returns are going lol
love the videos! keep it up
Glad you like them!
I wish my lower ported intake didn't break in the mail because this setup looks great paired with the upper.
File a claim with ups/FedEx and get another one
I wonder how do-able this is on the FPIU explorer. Its got the same 3.7 afaik.
We have someone attempting to adapt it now
any1 know if you can do this kit on the 2013 lincoln mkz 3.7??
With enough time and money and effort anything is possible.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Do you guys install kits? And if so how much would labor cost around?
Complete kit with everything needed installed and dyno tuned is $11,500
Would I be able to use the holley intake with the turbo kit?
Yes
Excellent vid! liked and subbed
Thank you
What bolt ons would you need before installing the kit
None. A stock car works great. Ported intakes are really the only thing wed suggest
Whats the max amount of boost you can make with the factory fuel pump
We don't recommend running boost with thr factory fuel pump
Can this turbo kit be attached to the 2015 MKZ 3.7?
Im sure it can be adapted to it
I've sold my stock manifold when I purchased a set of BBK long tubes will there any difference in power gains if you ditch the stock ones to a bbk shorties?
Not a lot
How much does the kit and installation cost?
Tuner kit is $4500.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Greetings from Chicago. Would love to let you guys tune my 3.7 💪🌪
We tune worldwide via email! We also have people ship us their cars all the time to get work done.
i would so let you guys work on my mustang 3.7! shadow would wake up with this!!
Bring it on over
@@automafiaracing where are you guys located?
How much added horsepower does this process create?
We can make anywhere from 400 to 670+ rwhp
@@automafiaracing do u guys have a workshop in California?
Hell no. We stay away from commifornia
Our shop is in FL.
@@automafiaracing I think you meant nazifornia.
Boost gage was unnecessary because Ford has a “vac/boost” in the gauges mode
Yup
@@automafiaracing would you guys want to work together?
For?
@@automafiaracing i have a V6 mustang and I’m learning mechanics would you guys be ok having a apprentice
We just moved to Billings Montana
Whats most bossted v6 owners run hp vise on stock engines?
With our kits and our tuning 500-575
@@automafiaracing with these are u on par with v8 stangs or how do they compare?
Gap almost all NA v8s and some boosted v8s
Great install
Ty
How does BBK long tube headers and an H-pipe change the exhaust situation?
you cant use longtubes on the turbo kit. shortys and stock exhaust works though!
@@automafiaracing Well, damn... I just ordered my kit and was hoping to have the custom Y pipe made for the BBK long tubes I currently have on it. Guess I'm buying shorties now. 😂
sell the long tubes.
Feel Free to Message us with any questions if you need advice or a quote on any parts, builds, installs, or dyno, email tuning. Here is a link to our Facebook Page. Link: facebook.com/automafiaracing
@@automafiaracing Haha, it's Sarah. I already ordered the kit! Have a manifold coming, and everything ready for it to get here!
How much cost everything ? I wanna put that thing on my v6 !
Complete kit runs $6999
What was the cost of this exact install parts and labor? Sorry if someone else asked this and I didn't see it
$3500 is what we charge to install it all and dyno tune.
$3500 for parts and installation ? If so count me in
No. $3500 is for install and dyno tune. The parts are separate
Would it be unnecessary to make a video for installing ported intakes on a 2015-17 mustang ?
I think we have one
I Like it. 💯
Thanks 💯
No upgraded map sensor?
yes the kit includes it.
How soon until we see the dyno run?
Gonna be a min for this car. Owner decided to go built motor
@@automafiaracing a build 3.7 motor?????? If so oh man can’t wait to see that!
Yessir. We are throwing some piston and rods in to see what we can do!
I wish I had friends that tinkered with cars like me.
Go to the track. Meet people. :)
What happen to the link?
automafiaracing.com/collections/turbo-kits
HOW MANY? THIS KIT ADDS MORE MPG?
It can actually yeah we had one customer get 28 mpg
Was the kit removed from the site?
No. Just an error on the new website. It will be live shortly
It isn't necessary to add a boost gage. All S550s have one built in. Here is a video that shows you how to do it. The link is ua-cam.com/video/1-8F1Tr2slc/v-deo.html.
We dont like the one on the dash.
How can I find kit
Order it from our website. Link: automafiaracing.com/2015-2017-3.7-l-v6-mustang-mafia-single-turbo-kit-450-670-rwhp-with-epa-approved-catted-y-pipe-/p120065
This is not in the owner manual 🤣🤣
We rewrote it.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
2 things,
1. Please cut the zip ties sideways. Cutting them flat with the width makes the edges sharp, cut them sideways please as a safety measure.
2. Heat guns are cheap. Order one online and do the heat shrink right. You are installing a 5k turbo kit, using a 99 cent bic lighter.
2 things. 1. Flush cuts dont leave them sharp. 2. Heat is Heat. We have heat guns but most dont. Showing how to do it without a Heat gun is for the customers installing at home. Also it works just as well.
IM GETTIN DEPRESSIV WATCHING A VIDEO WITH GUYS WEARING MASK :(
He doesn't like his face in videos
Sadly soon all gas cars will be banned in EU and USA! In France they have a new banning law for ICE cars called SCHLABOUBVE and in Switzerland the HESCHLAVVO law! In Scandinavian countries soon there will be a so called SMORVEBIDEN law)
Stupid stupid stupid!!
Yalls complete kit comes with EVERYTHING i need to bolt this up in my garage? besides the wrenches.
Yes