I really do have a lotta respect for the 3.7s Mustangs sounds really good and can make a really good amount of horsepower while having good gas mileage.
If I ever get around to affording one of these turbo kits for my s550. I wana try out the catted Y pipe > X pipe > muffler delete. I would imagine it would sound good 🤔
Since you guys seem to do a few AU Barra builds, do you know of any engine builders that may be able to set up a GM 4200(Ameri_barra) to make reasonable power? I've got a foxbody that I'm currently doing body work on, and want to do something other than a coyote. I think it would funny to do a built, turbo'd, GM 4200 meme build.
Good set up ! I notice you pull your test in 4 gear but when I dyno test my car I am always be blocked by the speed limiter ! So the only solution Is to test in 2 but the run is too short! What have you do to skirt the speed limiter ? Action on the traction button don’t works, did you unplug a rear wheel speed sensor for that ?
@@automafiaracing ok here in France it’s difficult to find mustang specialist to remove the speed limiter ! Is it blocked in the abs ECU or in the Injection ECU ? For the next test I will try to unplug the rear wheel speed sensor
@automafiaracing ok i take a look at your proposal, you means by buying a SCT X4 tuning device? My car is a 2014 RS1 roush V6 with roush exhaust and intake, what kind of power did you usually see with this set-up? Confirm me, when you speak about power, it's at the rear wheel or at the dyne rolling roll ? I am Mechanic teacher here in France and i have done some dyne test at the workshop but My dyno test at the wheel measurement gives me 244 HP à 6242 rpm and 305 N.m at 4227 rpm, seems to be low for me??? Test in 3rd gear and with speed limiter not disable, Perhaps the speed limiter close the throttle for the speed limit at the end of the run?
We can build one but we'd need the vehicle at our shop. 📬 Contact AMR for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 Support@AutoMafiaRacing.com www.automafiaracing.com
We have payment plans. 📬 Contact AMR for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 Support@AutoMafiaRacing.com www.automafiaracing.com
I really do have a lotta respect for the 3.7s Mustangs sounds really good and can make a really good amount of horsepower while having good gas mileage.
amen
These 3.7s have crazy potential i see.
Yes they do we have built TONs of them to 500-600+ rwhp
Badass. Great numbers! …that Boss 302 decal though.
Tacky
Right
AMR nothing but Smiles. Love it 💯
Hell ya
Dudes face totally says he's gonna blow that engine and brake some laws! HAHAHAHAHA
Hahaha ya..
If I ever get around to affording one of these turbo kits for my s550. I wana try out the catted Y pipe > X pipe > muffler delete. I would imagine it would sound good 🤔
Lets do it
Eventually 👍
I was thinking catted Y >H >Resonators >Borla s types
Cool
@automafiaracing
Nope do mine first
Contact info please
Would the amount of miles on the engine matter mine over 100,000 but runs good and has never had a problem?
half the cars we boost are well over 100k miles
@@automafiaracingwhat about 200k🤔
I want only 450hp I got 2016 mustang v6 manual. How much ?
I've had several times where the engine overheated... is there still any potential for boost?
Since you guys seem to do a few AU Barra builds, do you know of any engine builders that may be able to set up a GM 4200(Ameri_barra) to make reasonable power? I've got a foxbody that I'm currently doing body work on, and want to do something other than a coyote. I think it would funny to do a built, turbo'd, GM 4200 meme build.
Meh. I dont know anyone off the top of my head
Good set up ! I notice you pull your test in 4 gear but when I dyno test my car I am always be blocked by the speed limiter ! So the only solution Is to test in 2 but the run is too short! What have you do to skirt the speed limiter ? Action on the traction button don’t works, did you unplug a rear wheel speed sensor for that ?
When we tune the car we remove the speed limiter. Yes traction control will work if youre tuned otherwise yes unplugging the ABS works.
@@automafiaracing ok here in France it’s difficult to find mustang specialist to remove the speed limiter ! Is it blocked in the abs ECU or in the Injection ECU ? For the next test I will try to unplug the rear wheel speed sensor
Its in the main ECU and we can send you a device
@automafiaracing ok i take a look at your proposal, you means by buying a SCT X4 tuning device? My car is a 2014 RS1 roush V6 with roush exhaust and intake, what kind of power did you usually see with this set-up? Confirm me, when you speak about power, it's at the rear wheel or at the dyne rolling roll ? I am Mechanic teacher here in France and i have done some dyne test at the workshop but My dyno test at the wheel measurement gives me 244 HP à 6242 rpm and 305 N.m at 4227 rpm, seems to be low for me??? Test in 3rd gear and with speed limiter not disable, Perhaps the speed limiter close the throttle for the speed limit at the end of the run?
Sounds about right . @benoitpaccaud1590
Just dropped a 3.7L in my fWD flex. I just need a turbo kit now lmfao 🤣
That would be a riot
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Do yall have any turbos for 2010 v6 mustangs? I want to do this to my mustang a little further down the line, amazing video!!
Yes we do.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Damnnn 🤩🤩
Amwn
Would you guys ever make a kit or could your kit fit a 3.5 n/a. I want more power out of my 3.5 Ford transit 350.
We can build one but we'd need the vehicle at our shop.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
I'm anxious to know if there are videos coming of a certain...yellow s550 v6 owned by Sarah
Next week. We are breaking in her clutch now
If I get a turbo kit for my 2013 3.7 how much power can I make if I keep my stock automatic transmission and how long will the transmission last?
On a stock motor we recommend keeping it to 600 rwhp or below. Should last a good long while if treated well
Is it possible to daily 600hp with that setup and ofc a couple of modifications
Yes of course.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
This would be amazing on my Kona Blue 2012 3.7L. May contact you guys in the near future!
yes you will love it.
Any idea why a boost controller would be in the trunk?
Lol because it was still in the box
Respect! Where are you guys based out of?
Billings, Montana
What tires you recommend for 500 hp mark
We sell Mickey Thompson tires for.grip.
📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
curious, would yall sell the y pipe for a turbo set up?
Yup. It's $1250
Wish i had the money buy turbo kit😂
We have payment plans.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Are turbos reliable for the 3.7 engine or does the engine need to be built?
Yes keep it under 600.hp ans treat it well and it can live for a long time
Would you guys make a kit for an lfx camaro or do you just specialize in v6 mustangs?
We will make one for the lfx. Just have to get someone to bring us one and some money
everything is great other than that decal
Its a nice car
Are the kits back in stock ?
You can buy one right now! We just keep selling and building them!
is this on stock internals?
Yes 100% sealed engine. We just change the spark plugs and injectors in the engine.
automafiaracing.com/collections/turbo-kits
Do you have to have a y pipe. I wanted to run xpipe
Think about that for a min
are you guys in ny?
No.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Also how far booked out are you
Depends on what you need done we have multiple bays
I want to do this to my 3.7 f150
Lets do it. The kit basically bolts right up to a F150
If your not first your last. :)
Truth
What’s that attached to the driver side valve cover
The catch can?
Whats the exhaust?
I think it was roush
How much for your turbo kit?
Complete kit is $4999
@@automafiaracing Is that complete install as well ? where located
302.......cringe
At least he makes more power than a 302 now lol
Lol
Thumbs down for the decal. Bro frontin…
Its faster then a Boss now
Uhhh does this guy even know what 302 stands for? That’s just embarrassing 😂
The owner? Probably just likes the look