The year is now 2023. Turbo V6 Mustangs have taken over the world. Foe's tremble in fear. Whistles, bringing the traditional v8 guy's inner race demons to fruition. AMR All the way baby!
If she was to get the Sync3 and enable the drive modes, she’d have wet and snow mode. It was one of main reasons I upgraded to it, besides getting rid of the calculator-looking stereo.
Only car I've let anyone get their hands on, and literally would do it all over again, 10 times. You guys killed it! This thing is stupid fun... time to get some kills, bois! 🤙#amrvstheworld
I’d like a easy 500-525hp on 91 octane, which is as good as I can get locally. A tune that’d be safe on the automatic transmission & drivetrain but will still keep the stock GT guys off my case. Sound doable ?
We are located in Billings, Montana. 📬 Contact AMR for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Not sure if this question has been asked or not yet but is there any ring gap done to any of the motors or is this 600 horsepower on stock gap and also would you recommend ring gap?
So the only thing I have a question on would there be any way to hold power passed 7k what would be limiting to make power all the way through the power band? Because it seems like it drops after 6k I believe the turbo is big enough to carry power all the way 7k with no drop?
@@automafiaracing oh ok makes sense! I have a 335 single turbo car at the moment and a v6 3.7 mustang going to be picking up your kits soon and paring it with a GFB g force 3 electronic boost controller! My favorite choice for controlling boost.
Pushing that must boost, is it recommended to get upgraded internals? I see there are stronger rods and pistons on your site, and when I get to this I wanna simply just push this car to the max with it still being reliable Also did this car in the video have any sort of mods other than the turbo done to the motor? (Bigger throttle body, ported intake manifold, valve springs etc)
Forgestars we sell them. 📬 Contact us for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 Support@AutoMafiaRacing.com facebook.com/automafiaracing
Those at time of the video were Rohana RC 8's. Now I run Forgestars, because radials and traction are preferred over death. Haha. They don't make them anymore. I think they came back as the RFX something, though. But these guys can get ahold of almost anything. Hit em up, for sure!
You know our kit is good when you can roast tires all day and then drive it 1000 miles home!
600hp is insane 😳
Pretty normal for us :)
@@automafiaracinglet’s do 800 😈
The year is now 2023. Turbo V6 Mustangs have taken over the world. Foe's tremble in fear. Whistles, bringing the traditional v8 guy's inner race demons to fruition.
AMR All the way baby!
Hahahha got to keep making them fast!
Turbo v8 is still faster
@@dr3nch_g0d52 damn thats crazy, you got one bro? 🤔
LoL wow he can read the brochure.
@@dr3nch_g0d52 you realize they’ll be neck and neck 😂😂
I cant wait for the day I can order my kit
We have payment plans
If she was to get the Sync3 and enable the drive modes, she’d have wet and snow mode. It was one of main reasons I upgraded to it, besides getting rid of the calculator-looking stereo.
Not a bad idea
@@automafiaracing yeah. I was having traction issues on rainy days. Wet/Snow mode cuts down the throttle.
Yeah she spins on dry hot pavement lol so water means ice skating
I always thought the computers needed to be reprogrammed to have those modes?
@ super easy install too.
#mafiaboosted WELCOME TO THE 600 CLUB SARAH 🤘🏼
😎🤙 Thanks dude!
#anotherone
@@Wish_Dot_Com that s550 is sick, all you need is some yellow and black seats and you're good to go
She's been working on this thing forever. Love it
Yes we were happy to get it and finish it for her.
Only car I've let anyone get their hands on, and literally would do it all over again, 10 times. You guys killed it! This thing is stupid fun... time to get some kills, bois! 🤙#amrvstheworld
Thank you for bringing her down to us! #TeamAMR
You guys do such an awesome job explaining everything! You are a true professional and I will be bringing my car to you one day!
We do our best thank you
Very nice. Great 3-4 shift and rip there!
Sendin it
WOOOOOOO!! 🙌🏼
Amen
I’d like a easy 500-525hp on 91 octane, which is as good as I can get locally. A tune that’d be safe on the automatic transmission & drivetrain but will still keep the stock GT guys off my case. Sound doable ?
Easily doable.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
I have a 2016 V6 mustang , where would I start to have a turbo installed by you guys and not some sketchy shop ?
We are located in Billings, Montana.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Mafia boost the world!!!!
I love the tractor flappy!!!
Its awesome
How reliable are the 3.7 engines with this much power? Would major upgrades have to be made?
600 rwho is where they start to be on the edge depending on how they are treated
I may have missed it but is this a factory sealed 3.7? Love these 3.7’s!!!
yes it is!
Not sure if this question has been asked or not yet but is there any ring gap done to any of the motors or is this 600 horsepower on stock gap and also would you recommend ring gap?
100% stock ring gap unopened motors. Yes they could probably benefit from opening the gap a lil bit
Thank you!
You're welcome
You're welcome
Im curious about the Holly intake you guys havw for the 3.7. What is the expected gain out of those?
We will be testing on a boosted car in the next few weeks
This is one of the only cars that actually scared the sh!t outta me… or 🤔 part car/part ur driving lol 😂 jk
Hahaha
Are you guys taking any cars as test cars? I’ll give ya mine as long as it comes back running 😂
Not any V6s at the moment. All of our v6 3.7 kits are finished being designed
So what are all the mods needed to get to 600hp?
Our Mafia complete engine bay turbo kit. Thats it
Damn she a boss.
amen
So the only thing I have a question on would there be any way to hold power passed 7k what would be limiting to make power all the way through the power band? Because it seems like it drops after 6k I believe the turbo is big enough to carry power all the way 7k with no drop?
Been wondering the same. It seems like an airflow issue
What youre seeing is a drop in boost. With a digital boost controller this is fixed
With the manual boost controller we see lets say 12 psi. Then is drops down to 10 ish and holds
@@automafiaracing oh ok makes sense! I have a 335 single turbo car at the moment and a v6 3.7 mustang going to be picking up your kits soon and paring it with a GFB g force 3 electronic boost controller! My favorite choice for controlling boost.
Great idea that helps a lot to better control the boost
Sorry I’m late in commenting but …what’s a good amount of power for daily or street driving ?
500 is perfect for the street imho
580 sounds perfect ! Thanks
Ok just kidding , I know you said 500, I’m considering a unique project will have to talk to you about in the next month .
How much would it be to do this setup
the turbo kit? around 6k
Our turbo kit starts at $4,999 shipped complete.
📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com
facebook.com/automafiaracing
Man can wait for mine
Hell ya
How much to get everything done and installed out the door to make at least 500rwhp?
About $9700
If I were just get a stang that’s over 100k miles on the Motor, n I toss this kit on it you think the motor is gonna hold?
We haven't seen one blow due to high mileage yet
@@automafiaracing sounds good will hopefully get this kit soon👍 good work on the stangs keep it up
Pushing that must boost, is it recommended to get upgraded internals? I see there are stronger rods and pistons on your site, and when I get to this I wanna simply just push this car to the max with it still being reliable
Also did this car in the video have any sort of mods other than the turbo done to the motor? (Bigger throttle body, ported intake manifold, valve springs etc)
600 and under keep stock motor. If you want over 600 then you want to build a motor.
@@automafiaracing 600whp? Or to the crank?
Did we pull the motor? No. The dyno measures hp to the wheels. To measure crank hp the engine would be out of the car and in a dyno cell....
@@automafiaracing makes sense
Yup
Is this possible with water meth and pump 91? Because i dont have much e85 in my area.
Yeah i think we can do it with meth and 91
I just want to see these cars on the track lol
Us too
What fuel was used for these runs? 93 oct. Or E85?
Both
We did runs on 93 and E85
Ford, fr need to give us a v6 turbo mustang. Instead off dropping it out
well take up the slack
Just bought a 3.7 2017 mustang, and looking for a turbo kit.
Here you go Link: www.auto-mafia.com/products/mafia-single-turbo-kit-complete-kit-15-17-3-7l-v6-mustang
Thank you for responding so quickly! I’ll check this link out
📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com
facebook.com/automafiaracing
Is this on stock internals
Yes
does anyone know if this is stock internals or not?
Yes bone stock engine
@@automafiaracing Is this car still running? Wondering because i wanna know if I could push my v6 mustang to 600whp and still have it as a daily
Where are y’all located?
Billings, Montana
Can I do it with a eco boost
We build those too
anyone know what wheels those are?
Forgestars we sell them.
📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com
facebook.com/automafiaracing
Those at time of the video were Rohana RC 8's. Now I run Forgestars, because radials and traction are preferred over death. Haha. They don't make them anymore. I think they came back as the RFX something, though. But these guys can get ahold of almost anything. Hit em up, for sure!
Treed!(first)
If youre not first youre last
I know the owner. Hehehehehe
Shes awesome
Why are y’all charging over 6K for a turbo kit ??
The complete kit starts at $4999. Which is insanely low for whats included