No heat output. Followed your video and checked the stats using a multimeter. Found the faulty one, ordered and replaced it and back up & running. Your video saved me £200! Big thanks
Really glad we were able to get your tumble dryer up and running you can do us a favour though subscribe to the channel as that does help us have a great New Year with the well saved money glad we could help you @markkeating3522 this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Hi @ @MichaelDobbs-vh9oz thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be UA-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇 Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
Thankyou For leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Thank You! - Having watched your video - and finding a screen-grab of the circuit diagram on the web - I was able to go through the various combinations of the 4 wire heater connector to trace the fault to the lower element, with the upper element and thermostats all OK. 😊👍
glad it was helpfull @victorldunn9638 this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Superb. Thanks a LOT for sharing. I've been this morning in a hotel here in Spain, trying to repair a Hyundai condenser tumble dryier. The motor and fan worked fine, filters are clean, both klixons were ok, as well as the rear and front NTC's. The resistances didnt seem ok, as I got weird values (about 300 kohm for low and high resistances) After dismantling the back of the machine and checking all the components I just mentioned, I switched the machine on, to see again what happens. The machine didnt start, because the problem now was that the display showed error E5, which is Open Door, even though the door was closed. Before, this error didnt appear. I took out the front panel to have fully access to the door microswitch, and after checking it with the tester, I confirmed it worked ok. The wire coming into the microswitch comes from the supply wire, and the wire coming out goes down (instead of going to the electronic card), to the area were the motor is, which causes I couldn't track it (as I had to leave soon), and check for any wire interruptions, which would be a reason for showing Open Door error. Since this is not an old machine, and a relatively well maintained one, my diagnostic is that there's a problem with the electronic card, as well as with the resistances. Another thing is, the user told me that apart from not heating, the differential switch often cut the power while the machine was working, althoug not always. In fact I didnt see it happen.
Glad it helped you with your dryer, please remember to share it Wrinkly hands fix appliances, not algorithms! My videos might not be UA-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @johnfitzsimmons3171 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
I purchased one of those small ‘portable dryers’ from Amazon. 110volt. It worked great for 3 months and now it doesn’t even turn on,Heat,timer,tumble. Nada. Nothing works outlet has power. I paid over $300 USD 3-4,years ago. Now,I’m afraid to buy a new one and brand. Any ideas of what a new dryer would cause this ? Danke.
Glad you liked it! i know you have already subscribed but its a thank you any way Thank you For leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Glad it was helpful! @omarmrd this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Good tutorial. It is a shame that indesit/hotpoint don't have any vented models that have sensor dry. You can't get a hotpoint/indesit condenser machine with sensor dry for under ~£297 either whereas beko sell them for just £220.
I just changed my heating element in hotpoint machine. Everything seems fine but it was off for a month so not sure if I’m smelling smoke? Would changing the element cause that?
Thank you For leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Great video. Would it be possible to tell me if there are any other thermostats along with their location (apart from the heating element unit thermostats) on an Indesit (idc8t3) condenser TD ? Not heating, tested the element and thermostats on the heating element-unit and I have continuity and circa 45/92 Ohm for single/both elements. Still no heat, motor, drum, pump are all good.....a little perplexed, but there must be another thermostat somewhere, just not sur where. Hope you can help (fingers crossed).
Followed your video as we have the same model. You didn't mention the reset on the thermostat on the SIDE of the heater that causes the dryer to run cold. Press a paper clip into the hole until you feel it click. Test it on your multimeter for continuity too. Why this isn't the old 'red button' I don't know!?
Some of the thermostats do not have a reset button. You are lucky. Have a great Christmas and a happy New Year. glad we could help you @radioman1170 this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
my dryer heater element got 3 wires....at the machine connector side the colours are black ...red..yellow, by looking at the inside the element i see 3x wires connections....2x red and 1x yellow, how would i test for this? wich wires? thanx
my indesit tumble dryer doesn't heat enough, stats are good beside the element and element itself is good. What could be the issue? cos if i dismantle my dryer further to locate other stats they would show continuity on the multimeter. How would i know if any of them is faulty?
Glad you like it Thank you For leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Hi I had a yellow dot thermal fail on the neutral on the heater what could have been the cause? The condenser was completely clogged. What is the spec replacement I need?
Without having your model number, I find it very hard to help you. Please could you use the website with all the correct details. Hi Paul B I will need the full model number of the identification plate please use our contact us page and make sure you fill out the request of what part you are after and will get back to you within 24 hours normally www.how-to-repair.com/help/contact-us/ this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
I have this machine how do you test if the timer is faulty checked everything else per your video and ok any advice would be helpful. My machine is just out of warranty and us totally dead.
I'm unable to tell you the wires to test because this manufacturer does not give me the workshop manual for the wiring, but I would say if you have 240 V going to the timer then you know everything is good and if you have tested all the other components, this would point me in the direction of telling you that the timer could be faulty glad we could help you @rogerstroud4102 this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
should be very similar Thankyou For leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is was keeps this channel going. Thanks 👍
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
No heat output. Followed your video and checked the stats using a multimeter. Found the faulty one, ordered and replaced it and back up & running. Your video saved me £200! Big thanks
Really glad we were able to get your tumble dryer up and running you can do us a favour though subscribe to the channel as that does help us have a great New Year with the well saved money
glad we could help you @markkeating3522 this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Excellent tutorial, the manufacturers mustn't like you, showing us how easy it is to fix rather than go out buy a new machine!
Absolutely first class. Talked & walked me through replacing the heating element & made it so easy - Genius !!
Hi @ @MichaelDobbs-vh9oz thanks a lot for your comment. It would be really helpful for me to get my video seen, as I'm no IT expert, to either share the channel or at least post it to your friends. My videos might not be UA-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! Please remember to subscribe to our channel, as that really helps us 😇
Since we work very hard in our warehouse making free video guides for you all on appliances, we always appreciate a beer, offering a choice of single or round beer. www.how-to-repair.com/help/buy-paul-a-beer/ Thanks 👍
Thanks for helping find the blown thermostat. Great Help !
Thankyou For leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Thank You! - Having watched your video - and finding a screen-grab of the circuit diagram on the web - I was able to go through the various combinations of the 4 wire heater connector to trace the fault to the lower element, with the upper element and thermostats all OK. 😊👍
glad it was helpfull @victorldunn9638 this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Just bought this dryer, thank you for sharing your great knowledge.
Superb. Thanks a LOT for sharing. I've been this morning in a hotel here in Spain, trying to repair a Hyundai condenser tumble dryier. The motor and fan worked fine, filters are clean, both klixons were ok, as well as the rear and front NTC's. The resistances didnt seem ok, as I got weird values (about 300 kohm for low and high resistances) After dismantling the back of the machine and checking all the components I just mentioned, I switched the machine on, to see again what happens. The machine didnt start, because the problem now was that the display showed error E5, which is Open Door, even though the door was closed. Before, this error didnt appear. I took out the front panel to have fully access to the door microswitch, and after checking it with the tester, I confirmed it worked ok. The wire coming into the microswitch comes from the supply wire, and the wire coming out goes down (instead of going to the electronic card), to the area were the motor is, which causes I couldn't track it (as I had to leave soon), and check for any wire interruptions, which would be a reason for showing Open Door error. Since this is not an old machine, and a relatively well maintained one, my diagnostic is that there's a problem with the electronic card, as well as with the resistances. Another thing is, the user told me that apart from not heating, the differential switch often cut the power while the machine was working, althoug not always. In fact I didnt see it happen.
Great vid, different model but exactly what I needed to see
Thanks for that insight taking the machine apart , locating fault, very well explained nice one 😊.
Glad it helped you with your dryer, please remember to share it Wrinkly hands fix appliances, not algorithms! My videos might not be UA-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @johnfitzsimmons3171 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Thanks I actually understood that and am going to give it a go!!
I purchased one of those small ‘portable dryers’ from Amazon. 110volt. It worked great for 3 months and now it doesn’t even turn on,Heat,timer,tumble. Nada. Nothing works outlet has power. I paid over $300 USD 3-4,years ago. Now,I’m afraid to buy a new one and brand. Any ideas of what a new dryer would cause this ? Danke.
A great presentation and very informative
Glad you liked it! i know you have already subscribed but its a thank you any way Thank you For leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Excellent video, many thanks Sir.
Glad it was helpful! @omarmrd this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Good tutorial. It is a shame that indesit/hotpoint don't have any vented models that have sensor dry. You can't get a hotpoint/indesit condenser machine with sensor dry for under ~£297 either whereas beko sell them for just £220.
I just changed my heating element in hotpoint machine. Everything seems fine but it was off for a month so not sure if I’m smelling smoke? Would changing the element cause that?
Thank you for the tutorial😊 can you recommend a reliable simple vented 9kg dryer please.
Very good.
Thank you For leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Great video.
Would it be possible to tell me if there are any other thermostats along with their location (apart from the heating element unit thermostats) on an Indesit (idc8t3) condenser TD ?
Not heating, tested the element and thermostats on the heating element-unit and I have continuity and circa 45/92 Ohm for single/both elements.
Still no heat, motor, drum, pump are all good.....a little perplexed, but there must be another thermostat somewhere, just not sur where.
Hope you can help (fingers crossed).
Thank you!
Glad I was able to help. Hope you have a good Christmas please remember to subscribe as that's is was keeps this channel going. Thanks 👍
Followed your video as we have the same model. You didn't mention the reset on the thermostat on the SIDE of the heater that causes the dryer to run cold. Press a paper clip into the hole until you feel it click. Test it on your multimeter for continuity too. Why this isn't the old 'red button' I don't know!?
Some of the thermostats do not have a reset button. You are lucky. Have a great Christmas and a happy New Year. glad we could help you @radioman1170 this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
Thank you do much for this tip. It worked for us and saved us getting a new dryer. Very grateful. 😊
my dryer heater element got 3 wires....at the machine connector side the colours are black ...red..yellow, by looking at the inside the element i see 3x wires connections....2x red and 1x yellow, how would i test for this? wich wires? thanx
help !!! where can we purchase a pruple spot thermastate kit ???...cant seem to fine one anywhere...
my indesit tumble dryer doesn't heat enough, stats are good beside the element and element itself is good. What could be the issue? cos if i dismantle my dryer further to locate other stats they would show continuity on the multimeter. How would i know if any of them is faulty?
Great video, always very helpful! 😀👍
Glad you like it Thank you For leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Hi pal I have changed heating element worked well for one week then stopped heating again what should I do thanks
Hi I had a yellow dot thermal fail on the neutral on the heater what could have been the cause? The condenser was completely clogged. What is the spec replacement I need?
Without having your model number, I find it very hard to help you. Please could you use the website with all the correct details. Hi Paul B I will need the full model number of the identification plate please use our contact us page and make sure you fill out the request of what part you are after and will get back to you within 24 hours normally www.how-to-repair.com/help/contact-us/
this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
I have this machine how do you test if the timer is faulty checked everything else per your video and ok any advice would be helpful.
My machine is just out of warranty and us totally dead.
I'm unable to tell you the wires to test because this manufacturer does not give me the workshop manual for the wiring, but I would say if you have 240 V going to the timer then you know everything is good and if you have tested all the other components, this would point me in the direction of telling you that the timer could be faulty glad we could help you @rogerstroud4102 this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's what keeps this channel going. Thanks 👍
will this work on a splendide tvm63x
should be very similar Thankyou For leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is was keeps this channel going. Thanks 👍
👍👍👍
I’m sure I left my wand here it’s gone
What a shitty design. You have to tear down the whole machine to replace a few thermostats.....