Glad it was helpful! And you managed to get the tumble dryer working again What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be UA-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @georgevarghese238 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
To have access to the front NTC is really complicated. Thankfully this brand is rarely seen on Spanish homes, at least around the area where I live, northeast Spain. Thanks a lot for the very informative video you made.
Thank you for leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
where is the thermostat on a Hoover infinity Vision HD VHC68B ? the only sensor on the front is the ntc sensor....and 2x on the heating element at the back. thanx
Love your videos as a handyman they have been handy! I have Zanusi ZDC8203W condenser that is not heating. I was initially called because the belt snapped it turns on and the motor is spinning but discovered no power to the elements. The TOC on the heater is fine and the NTC is working there. There is continuity on the blower ntc any suggestions please?
As you would be well aware, it is very hard for me to assist when I haven't got the appliance in front to me, but I will tell you to inspect any forward thermostats or NTC sensors to the correct ohms reading at the right temperature, and I would also tell you that if all the thermostats and NTC sensors are testing correctly, then you may have a problem with the high amperage really on the printed circuit board. I hope you had a good New Year and please remember to subscribe to the channel as that helps us
my candy washer dryer has a E22 and doesnt spin properly, or it has a hard time spinning or just stops during wash cycle. ive searched online but havent found anything. I would appreciate an opinion from you.
please use the contact us page on the website www.how-to-repair.com/help/contact-us/ and I will be happy to assist you once I'm able to get the workshop manual for this machine. Thank you for leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
at the moment we only have a few parts on the website as we're in the middle of rebuilding it but our supplier will ship directly to you repairpartsteam.co.uk/index?rpt=b5846a951b @vincewade please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
Very well explained. Thanks
Glad it was helpful! And you managed to get the tumble dryer working again What would really help me to get my video seen as I'm no IT expert is to either share the channel or at least post it to your friends my videos might not be UA-cam superstars, but they save Appliances from the scrapheap. Share and help us fight appliance waste! @georgevarghese238 please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍
To have access to the front NTC is really complicated. Thankfully this brand is rarely seen on Spanish homes, at least around the area where I live, northeast Spain. Thanks a lot for the very informative video you made.
Thank you for leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
where is the thermostat on a Hoover infinity Vision HD VHC68B ? the only sensor on the front is the ntc sensor....and 2x on the heating element at the back. thanx
Love your videos as a handyman they have been handy!
I have Zanusi ZDC8203W condenser that is not heating. I was initially called because the belt snapped it turns on and the motor is spinning but discovered no power to the elements. The TOC on the heater is fine and the NTC is working there. There is continuity on the blower ntc any suggestions please?
As you would be well aware, it is very hard for me to assist when I haven't got the appliance in front to me, but I will tell you to inspect any forward thermostats or NTC sensors to the correct ohms reading at the right temperature, and I would also tell you that if all the thermostats and NTC sensors are testing correctly, then you may have a problem with the high amperage really on the printed circuit board. I hope you had a good New Year and please remember to subscribe to the channel as that helps us
my candy washer dryer has a E22 and doesnt spin properly, or it has a hard time spinning or just stops during wash cycle. ive searched online but havent found anything. I would appreciate an opinion from you.
please use the contact us page on the website www.how-to-repair.com/help/contact-us/ and I will be happy to assist you once I'm able to get the workshop manual for this machine. Thank you for leaving a comment this is for you ua-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
How do I order parts
at the moment we only have a few parts on the website as we're in the middle of rebuilding it but our supplier will ship directly to you repairpartsteam.co.uk/index?rpt=b5846a951b @vincewade please remember to subscribe to our channel as that really helps us ua-cam.com/users/shortse432SAb2g08 Thanks, Paul 👍