Been a Discount Tire customer for a while, two different cars, and they have always been good to me. From the service writers to the techs. Even thought about picking up a part time job at a shop here in the Twin Cities.
I honestly miss these kind of tire machines. I now work at a dealer with the automatic stuff where you just push buttons. It’s nice but I don’t feel as in control. I worked at discount tire for 7 months, and by far was my best job. The team and management were phenomenal, we didn’t oversell anything unless it was a safety issue, and I love that we do actual repairs on flat tires. I’m not sure about other dealerships but the one I’m at just uses those plug in ones where you don’t even take the tire out. Anytime a car comes in with a nail in it or a flat tire, I refer them to discount tire that’s less than a mile away. I explain to them that our repairs do work but I highly recommend discount tire since they do it for free and get it done right. I mean on average it’s $50-$60 bucks to repair a flat at the dealer. Plus you have all that dealer crap where you have to wait forever. The only time I would go to a dealer for a tire repair or new tires is if I’m driving a more expensive vehicle like a 992 or anything like that. Overall, I would highly recommend working at discount tire, but I would check the reviews of the place first, because some are awful service while others are amazing!
Just came here to say discount tire is the only trustworthy place I’ve been able to get tires from, had a flat and Walmart wanted to charge me over 200$, not the first time they have screwed us over. Called discount tire and they hooked me up with a tire that was 67$, plus they have swapped many tires for me free of charge when I was hurting for money
Im literally going in tomorrow for my 2nd day in and will be starting the real work at a station instead of on a practice tire. Thanks for posting this cause the actually removal and installing of the tire on the rim was giving me trouble on what to do with the bar and the machine. Hopefully I’m not too much of a burden as the only mechanic work I’ve ever done is at home on my own shitbox.
@@divockorigi3899 KEEP A GOOD EYE ON THAT FUCKING SENSOR. I ACCIDENTALLY SNAPPED ONE AND THAT COST $120 TO REPLACE. Not out of my pay but that’s my 1 strike for a while.
@@divockorigi3899 when taking the tire off the rim make sure the sensor is to the left of the duck tail. Then when taking the bottom off it should be near your belly. When putting it on make sure for both beads it’s by your belly. If you don’t the duck or the bead can rip it off.
@@jayortiz5589 I got certified as a service tech 3-4 days ago and one of the full timers said in about a week they might start certify me for crew chief. Its been about 2.5 weeks of me working here and I like it a lot. I’d say to stick it out a while longer see where it goes cause for me all I had to do was stay after I’m scheduled when they ask me to ask questions when Idk something and picking up things quick. It is a lot to learn at once and i’m still learning different ways to do different things but once you get reps in it gets way easier. Not to say your not doing any of these things thats just how it worked for me i’m sure how busy it is played a factor in that too i’m over at north houston so we busy all the time
@@jayortiz5589 Yes still working at discount tire. Just worked today and I have to get to work by 11am tmr haha. My honest opinion would be Discount is a great job for someone who has a good work ethic and wants to work a lot of hours (they allow you to work 12 hours a day) which equals really good paychecks. But you almost expect it working that hard in the damn heat all day lol. I knew almost nothing about tires starting and my shop is full of really cool guys that help when I ask a question. The checks are actually really good and they pay you during training (where you are learning on computer). I would say go for it and if you find you don’t like it after a month then find a new job and put in your 2 weeks, good luck!
My back hurt watching this lol used to work here for 3 1/2 years about 10 years ago. Looking back it was kind of a fun job but the pay was terrible for how much work you did. I make double now doing a fraction of the work I did at this place.
MartiX first I’ll ask how much you made at your Discount Tire, cuz all are different? I worked there until about early 2012 making $12 an hour. I work now in a completely different field of work. I joined the military for 4 years then got out and landed an IT job starting at $20 an hour. When I travel though I get “per diem” in those places around $100 a day. So daily I’ll make $260 on those days. In a couple weeks I’ll make more in IT than at Discount for a month or more. How old are you and are you a tech or salesman? All the guys I worked with left DT and got much better paying jobs after leaving.
Hey man just remember to lube both beads prior to dismounting and I'm not sure if ur region imposes the need to lube off the wheel (like on the ground) but great hustle just needs some fine tuning. Just remember TO BE THE BEST! shout out from the AZ region
the tires are light 10 15 pounds maybe depending on the size up to 40 lbs. the whole assemblies (wheels and tires) are any where from 30-40 lbs for a small 16 inch steely and 130 lbs for big ass truck assemblies
Best Practices is a term used by Discount Tire. They go hand in hand with our Dream Board, which contain our Operating Philosophies, Our Vision and Overall Strategy. In regards of what a Best Practice is, they have to do with our #1 Goal, which is to Keep Myself and My Team mates SAFE. Best Practices are the newest and updated strategies we use to accomplish this. Whether it be for Service Techs, Crew Chiefs or Service Coordinators, every position has Best Practices. Hope this helps :)
Keep your VCR in your back pocket for quick access, When doing rotation and rebalance, don’t even strip the old weights just throw them on the balancer and add weight if needed. Always works for me and I can have my side bolted and ready for torque before my buddy even finishes balancing
2:45 Right there is when you should of released the wheel and threw it in the cage. Hit that tire button and it would have seated itself. All that time seating the bead on the changer was wasted time. Every second counts gentlemen. Be Honest, Work Hard, Have Fun, Be Grateful, and Pay it Forward.
It’s obvious that you are not a trusted expert, Follow best practices no matter what. Our people safety is important and quality follows after. Following these guidelines allows for optimum quality work delivered in timely manner. -Houston Texas region.
i mean i think it’s a better idea to get the bead partially seated front and back before throwing it in the air cage, where it can lock completely before balancing but going straight from the changer to air cage seems kinda risky and could end up costing more time if the bead doesn’t hold air, maybe i’ll try it out tho thanks!
Was09 up on here!!!! I was really gonna be more pissed than anything if that sensor didn’t get rebuilt. Idc about your speed at all but god dammit if you don’t rebuild that sensor I’ll have that ass Ahahahahahaha
@@SSNorthWest No longer with Discount, but whos your buddy if they were at shoreline and Burien I can only imagine youre talking about Chris. Or maybe J Pat, but you would've said it differently hahaha
Strip the weights,Break the back bead first, not the face. Don’t just full send the valve stem tool right on the rim like that, and no more putting the tires on the rim before putting it on, gotta lube it with it on the ground then mount it.
@@Noobhunter2012 i promise unless they rode them to the wires which we don’t even service it could be alpina wheels and won’t get damaged from a brand new tire or even flat repair buddy
@@pksdizzy2436 just a best practice for everyone and there store to follow its is for the safety and quality we strive for but aswell good habits since you do realize we got a showroom watching us on how we mount and dismount tires where the customer would get worried for there 2k ferrari wheel or bmw wheel.
I’m an assistant manager at IAQ02 and I have to ask what r y’all wearing😂😂 I’ve been with the company since 2020 and I’ve never seen some stuff like this
Just do it right and find your rhythm. They tell you the speed is a byproduct, not the goal, and it’s true. You’ll be faster if you just do the same process the same way every time. Good luck!
i enjoy working for DT bc of the busy work but i never preach about best practices. The same mfs that do that are the same ones that cut corners in the backroom. Best practices are a joke once the rubber meets the road and red shirts are the worst ones.
I swear our salesman want a 4 set of new wheels, sensors and tires to be done in 5 minutes. lmfao. Also, we do aftermarket wheels so there's no being rough about it, one scratch and the customer gets a new one, keeps both and they come out of your check, lol.
Old discount tire ways you would not replace the sensor since we did not have them in stock meanwhile now with new types of sensors but aswell dealing with frozen sensors the time to change 1 tire in a minute is long gone unless you are working with a honda with rubber valves most of our guys tend to break sensors on which we would have to replace for our mistakes
Discount tire regularly over inflates tires to wear them out prematurely. No where in your car manual does it say to ever over inflate tires. They say they fix nail holes in tires free but mine still leaks air because they did not fix it. Kept my rim and tried to sell me another one. Said my tire pressure sensors were worn out and needed new ones. They are still working fine.
Dawg we go off whatever the door says 💀😂 and if ur flat is still leaking take it back to the store and have them check the tire again, if it’s leaking from the plug we will give you a new tire
Yeah we usually add 3 Psi (at least in Utah due to temp fluctuations + they stay in the target range longer) Keep in mind you can always request to go exactly to OE specs if you want
We would be castrated for changing tires that slow lol, 4 minutes is a one time start to finish and an all four is 8-10, we run mirror, keep it up though man. txd_23 👌
@@pksdizzy2436 idk the valve core just flew out when i took the hose out of the valve stem. i’m assuming the core was lose but idk🤷♂️ it went completely flat😂
Every time I go to Discount Tires, the front desk guy always gives me the same bait and switch routine.... "I'm looking at my inventory and I don't have those tires in stock, but I do have similar brand in stock".
Welll I probably won’t do business there but my guy still going to take his truck I made appoint and woke up early on a sat urday waited there they never showed up left I won’t be blown off like that I called made appointment they gave me a time gave my name make model just really bad business no phone back no opology need new person to run that place Anaheim location oh and they blocked yelp lol so I can’t yelp lol
@@Generalusuer he must be the one that all tire stores are looking for, if this man can take tire off, change its stem, put new tire on and balance in a fuckimg minute. Damn 😂 he could finish a car in under 5 min. Hes god
No you cant the machine mathematically wouldn't allow you to do in one minute while following best practice. Maybe 2.5 and end with 9 min bay time 4 new after tourquinf quit capping be humble
@@nathanthompson8545 the old machines when they were not electric and used air to turn the motor it was possible but our changers suck now since they can turn at a certain speed. Reason on why they changed is that people were scratching and it was a bit dangerous
i like how the only people who watch these type videos are former or current discount tire employees 💀
Where you work?
How hard is this shit
@@NinOG653 eh, you’ll get used to it
@@jaywinston3059 UT002
@@NinOG653 just ask questions don’t be a dumbass n u will be a ok
Been a Discount Tire customer for a while, two different cars, and they have always been good to me. From the service writers to the techs. Even thought about picking up a part time job at a shop here in the Twin Cities.
I honestly miss these kind of tire machines. I now work at a dealer with the automatic stuff where you just push buttons. It’s nice but I don’t feel as in control. I worked at discount tire for 7 months, and by far was my best job. The team and management were phenomenal, we didn’t oversell anything unless it was a safety issue, and I love that we do actual repairs on flat tires. I’m not sure about other dealerships but the one I’m at just uses those plug in ones where you don’t even take the tire out. Anytime a car comes in with a nail in it or a flat tire, I refer them to discount tire that’s less than a mile away. I explain to them that our repairs do work but I highly recommend discount tire since they do it for free and get it done right. I mean on average it’s $50-$60 bucks to repair a flat at the dealer. Plus you have all that dealer crap where you have to wait forever. The only time I would go to a dealer for a tire repair or new tires is if I’m driving a more expensive vehicle like a 992 or anything like that. Overall, I would highly recommend working at discount tire, but I would check the reviews of the place first, because some are awful service while others are amazing!
Just came here to say discount tire is the only trustworthy place I’ve been able to get tires from, had a flat and Walmart wanted to charge me over 200$, not the first time they have screwed us over.
Called discount tire and they hooked me up with a tire that was 67$, plus they have swapped many tires for me free of charge when I was hurting for money
Yea that’s good we do good stuff we do free flat repairs which is amazing
Dang this store is so quiet compared to ours :P
Matt Gibson fr dude and what are they wearing
dude we’re loud af in arizona ,
rappin the lyrics, where’s the music
@@ryley734 which one u work at?
Fr fr. Over in California it is EXTREMELY loud.
This aint nothing compared to a Les Schwab Tire shop...... 😎
Im literally going in tomorrow for my 2nd day in and will be starting the real work at a station instead of on a practice tire. Thanks for posting this cause the actually removal and installing of the tire on the rim was giving me trouble on what to do with the bar and the machine. Hopefully I’m not too much of a burden as the only mechanic work I’ve ever done is at home on my own shitbox.
I also Just started and that's what is giving me trouble as well
@@divockorigi3899 KEEP A GOOD EYE ON THAT FUCKING SENSOR. I ACCIDENTALLY SNAPPED ONE AND THAT COST $120 TO REPLACE. Not out of my pay but that’s my 1 strike for a while.
@@gaving4188 keep in eye on it during what process if you don't mind explaining
@@divockorigi3899 when taking the tire off the rim make sure the sensor is to the left of the duck tail. Then when taking the bottom off it should be near your belly. When putting it on make sure for both beads it’s by your belly. If you don’t the duck or the bead can rip it off.
@@gaving4188 that helps certainly thanks. so many details can feel overwhelming for me but I will get it eventually
Good work in cold weather 👍🏼
Why do they not have uniforms and look like a mf baseball team?
I noticed that too
Depends on the company I guess. I'm also a tire technician and I don't wear a uniform either.
Most of them don’t I don’t get why this store does mine doesn’t
It’s bc it’s winter and cold
Felt that instant look when he heard the horn, you needa guide in bro??
I am amazed at how this does not scratch or chip the wheel
Set the duck head idiot
It’s all about who’s on the machine . Those things can easily scratch an alloy rim if you don’t know what ur doing
today was my first day, I just did computer bs so this video really helped me for when i actually get out on the bay
Bro you’re trash 1v1 me in an all 4
Dude same today is my 4th day and i’ve learned more spending 45 min in the shop than I have the entire online class 😂💀
So how you guys doing? Still at the job? Thinking about accepting a Job offer I just got that's why I'm asking.
@@jayortiz5589 I got certified as a service tech 3-4 days ago and one of the full timers said in about a week they might start certify me for crew chief. Its been about 2.5 weeks of me working here and I like it a lot. I’d say to stick it out a while longer see where it goes cause for me all I had to do was stay after I’m scheduled when they ask me to ask questions when Idk something and picking up things quick. It is a lot to learn at once and i’m still learning different ways to do different things but once you get reps in it gets way easier. Not to say your not doing any of these things thats just how it worked for me i’m sure how busy it is played a factor in that too i’m over at north houston so we busy all the time
@@jayortiz5589 Yes still working at discount tire. Just worked today and I have to get to work by 11am tmr haha. My honest opinion would be Discount is a great job for someone who has a good work ethic and wants to work a lot of hours (they allow you to work 12 hours a day) which equals really good paychecks. But you almost expect it working that hard in the damn heat all day lol. I knew almost nothing about tires starting and my shop is full of really cool guys that help when I ask a question. The checks are actually really good and they pay you during training (where you are learning on computer). I would say go for it and if you find you don’t like it after a month then find a new job and put in your 2 weeks, good luck!
Where are the uniforms at?
Damn I remember my first day
redsplatr gaming i remember when I was slow 😂
My first today lol
Matthew Kinney how was it?
Brandon Andrew hell
Same here, I was slow af
My back hurt watching this lol used to work here for 3 1/2 years about 10 years ago. Looking back it was kind of a fun job but the pay was terrible for how much work you did. I make double now doing a fraction of the work I did at this place.
Dom Wings what’s your job now? I’m tryna get out too before it’s too late.
MartiX first I’ll ask how much you made at your Discount Tire, cuz all are different? I worked there until about early 2012 making $12 an hour. I work now in a completely different field of work. I joined the military for 4 years then got out and landed an IT job starting at $20 an hour. When I travel though I get “per diem” in those places around $100 a day. So daily I’ll make $260 on those days. In a couple weeks I’ll make more in IT than at Discount for a month or more. How old are you and are you a tech or salesman? All the guys I worked with left DT and got much better paying jobs after leaving.
Its different now. They switched full timers to hourly I make 70 k a year.
😂😂
@@domwings4329 12 a hour? Haha they changed that, people with a lot of experience make up to 20 a hour
This store is so clean our store is sooooo old like 1998 old
Hey man just remember to lube both beads prior to dismounting and I'm not sure if ur region imposes the need to lube off the wheel (like on the ground) but great hustle just needs some fine tuning. Just remember TO BE THE BEST! shout out from the AZ region
lol no you dont
These guys working pretty hard salute to them
@@haris6067 we work are ass off shit sucks
also from AZ, surprise area
You had to use your teeth to open a vs 950???
TotalGamerTG 😂😂😂
I do that too bruh, fast and efficient
at my store the 950s don't aren't in a bag
@@dylanaguilar6545 BRO THEN YOU IKNOW! They smell like cucumbers. PLEASE tell me I’m not the only one
redsplatr gaming 😂
that was pretty rough when you removed that valve, especially considering there wasn't a guard on the tool. other then that good shit lol.
tool is plastic
Nah that’s how u do it
What part of the TPMS is being replaced, just had all 4 of my tires replaced at discount tire and was curious.
just the valve stem (black rubber thingy) the actual sensor he unscrews is the same just puts a fresh stem in there
And why does your inventory look like that ?😭
Same outs is clean
Ours^^
Was at TN0012 from 2015 - 2018 under Ian Witherspoon. Hard work but fun times nonetheless.
First day tmr kinda excited and nervous at the same time imma be slow the first day
How’d it go? I have my interview tomorrow
cyrus robles wassup men yea it was alright I only worked for like 3 weeks Bc of school I couldn’t work it out.
cyrus robles Ik I’m late but for the interview it’s pretty easy they just wunna get to know more about you
This guy does it exactly like me, love to see it
i have to ask, whats the average weight of those tires with the wheels on vs without?
the tires are light 10 15 pounds maybe depending on the size up to 40 lbs. the whole assemblies (wheels and tires) are any where from 30-40 lbs for a small 16 inch steely and 130 lbs for big ass truck assemblies
Trucks with BIG ass assembles can get up to 120 for tire and wheel and cars are like 30-40 for normal car assembles
@@grassyfps7301 fuck truck tires dude so heavy
@@xaviergreen6817 yea it’s rough those mfs come in with like. 120 pound assemblies
Just put my application in. I’m going to the store tomorrow so I decided to see what the work was like.
i have my interview today so i did the same lol
@@nickmuscolino8724 how’d it go?
Dope. My first day is tomorrow. Hopefully I learn all this quickly
FakeVyz how is it so far
haha I just started a month ago too
I just applied today. Hope i get the position.
are u fast now?
haha my first day was yesterday im in love with the job already!
The layout of y'all's store is odd
What store is this?
Training DLC / POV : At home because the first day had you personally unimpressed by your performance 😂
What are best practices
Best Practices is a term used by Discount Tire. They go hand in hand with our Dream Board, which contain our Operating Philosophies, Our Vision and Overall Strategy. In regards of what a Best Practice is, they have to do with our #1 Goal, which is to Keep Myself and My Team mates SAFE. Best Practices are the newest and updated strategies we use to accomplish this. Whether it be for Service Techs, Crew Chiefs or Service Coordinators, every position has Best Practices. Hope this helps :)
Keep your VCR in your back pocket for quick access, When doing rotation and rebalance, don’t even strip the old weights just throw them on the balancer and add weight if needed. Always works for me and I can have my side bolted and ready for torque before my buddy even finishes balancing
@@sambo2891 Bruh, That's rough as hahahaha
Sammy2k yup just counter balance everything dumbass, if it asks for weight you gotta strip what’s on there and re spin
Austin Clark yes sir!
2:45 Right there is when you should of released the wheel and threw it in the cage. Hit that tire button and it would have seated itself. All that time seating the bead on the changer was wasted time. Every second counts gentlemen. Be Honest, Work Hard, Have Fun, Be Grateful, and Pay it Forward.
Bruce's 5 life lessons :)
It’s obvious that you are not a trusted expert, Follow best practices no matter what. Our people safety is important and quality follows after. Following these guidelines allows for optimum quality work delivered in timely manner.
-Houston Texas region.
I thought you have to air up the 10 psi to get the bead locked then air up .
i mean i think it’s a better idea to get the bead partially seated front and back before throwing it in the air cage, where it can lock completely before balancing but going straight from the changer to air cage seems kinda risky and could end up costing more time if the bead doesn’t hold air, maybe i’ll try it out tho thanks!
i tried it out, it saves alot of time. ofc there’s the few exceptions but most of the time it helps more than it hinders
But did he place back the rebuild in the paperwork?
That shit drives me mad
Yooooo what is up with the clothes???? ARL_04 over here! Way different store design
What was the purpose of this video
hey man do you mind if i use this footage for my video
Get it brother. Love from vaw_01
Are you doing that to 5s best practice standards
I miss working at a tire shop
been at DT for 2 weeks FUCKIN LOVIN THIS SHIT LETS GOOOOOOOO MAN WORK
Alllll dayyyyyyy
Yo why is this the funniest insult that is just common smack talk to any region nation wide. All day baby 5 head ass
Bruh 😂
Lowkey those shoes look like them county jail shoes mann
Allll dayyy! Bay 2
Was09 up on here!!!!
I was really gonna be more pissed than anything if that sensor didn’t get rebuilt. Idc about your speed at all but god dammit if you don’t rebuild that sensor I’ll have that ass Ahahahahahaha
Danny Ryan yikes look at those uniforms
It never looked like he wasn’t going to rebuild the sensor lol
Was09? Isnt that burien? How long have you worked there i have coworker over at was17 who worked there in the past.
@@SSNorthWest No longer with Discount, but whos your buddy if they were at shoreline and Burien I can only imagine youre talking about Chris. Or maybe J Pat, but you would've said it differently hahaha
@@dannyhawkeye1412 im was09 👀
0:50 DUDE EVERYONE DOES IT LMAO
Edit: love from UTS-14
I'm starting my first day at discount tire in a few days, any tips?
Slow down to speed up. Drink lots of water and eat 4-5 meals a day. Notify the service coordinator if you have the slightest inconvenience or problem.
@@Mr.TBirdy haha lol
@@ShamrockUSA how was your first day?
@@Danny-zg4cs pretty good. I like it a lot more than my old jobs
Im going to be graduating school soon and I want to get into the mechanics field, is discount tire a good place to work
Strip the weights,Break the back bead first, not the face. Don’t just full send the valve stem tool right on the rim like that, and no more putting the tires on the rim before putting it on, gotta lube it with it on the ground then mount it.
thats why your store is slow lol
@@baconlt03pursuits52 and this why your store gets complaints with damaged wheels xD but honestly steel wheel tires do not get the same treatment
@@Noobhunter2012 i promise unless they rode them to the wires which we don’t even service it could be alpina wheels and won’t get damaged from a brand new tire or even flat repair buddy
@@pksdizzy2436 just a best practice for everyone and there store to follow its is for the safety and quality we strive for but aswell good habits since you do realize we got a showroom watching us on how we mount and dismount tires where the customer would get worried for there 2k ferrari wheel or bmw wheel.
Bro your trash
what is y’all’s dress code yall be wearin the randomest stuff at that shop
When they change the wrong tire and leave you with a busted one it does not matter
Love from azp 50
I’m an assistant manager at IAQ02 and I have to ask what r y’all wearing😂😂 I’ve been with the company since 2020 and I’ve never seen some stuff like this
I would not have taken the job if i had to wear that baseball uniform lol TXD66
Dammn it takes me 8 minutes too do this i ne3d to figure this out lol😭
Just do it right and find your rhythm. They tell you the speed is a byproduct, not the goal, and it’s true. You’ll be faster if you just do the same process the same way every time. Good luck!
I actually found that I'm quicker when I don't rush. When you try super hard to be fast you make mistakes.
i enjoy working for DT bc of the busy work but i never preach about best practices. The same mfs that do that are the same ones that cut corners in the backroom. Best practices are a joke once the rubber meets the road and red shirts are the worst ones.
Facts you couldn’t have said it better 😂
What’s up with the spandex lol
3 mins and 19 seconds from the time you broke the bead till it was in the air cage😂 you couldn’t work at my store
I swear our salesman want a 4 set of new wheels, sensors and tires to be done in 5 minutes. lmfao.
Also, we do aftermarket wheels so there's no being rough about it, one scratch and the customer gets a new one, keeps both and they come out of your check, lol.
Old discount tire ways you would not replace the sensor since we did not have them in stock meanwhile now with new types of sensors but aswell dealing with frozen sensors the time to change 1 tire in a minute is long gone unless you are working with a honda with rubber valves most of our guys tend to break sensors on which we would have to replace for our mistakes
But i do agree i would have gone to my next tire by this point 950 rebuilds are easy if you multitask grabbing the valve while unscrewing the t25 bolt
Shoes are accident waiting to happen
CAN 13 baby!
do you not have uniforms??? i’m so confused. i’m at an america’s tire and they get on our ass if our shirt even has a little bit of muffin top
my store has uniforms i have no idea why they dont
I'm glad I left this job you don't make shit here 😂
Half way!
Is discount tire the same as americas tire
Yes it is
Is this a slow tutorial
Are you wearing baseball uniforms
I use to work at discount tire. Loved it there. Shame i had to drop dirty for marijuana IN MICHIGAN. Smh
curious to know why DT won't rebalance tires that show camber wear. isn't it possible to do?
Discount tire regularly over inflates tires to wear them out prematurely. No where in your car manual does it say to ever over inflate tires.
They say they fix nail holes in tires free but mine still leaks air because they did not fix it. Kept my rim and tried to sell me another one. Said my tire pressure sensors were worn out and needed new ones. They are still working fine.
We always inflate tires according to manufacturers specs except for trailer tires which we air up to max psi or whatever customer wants.
Dawg we go off whatever the door says 💀😂 and if ur flat is still leaking take it back to the store and have them check the tire again, if it’s leaking from the plug we will give you a new tire
Yeah we usually add 3 Psi (at least in Utah due to temp fluctuations + they stay in the target range longer)
Keep in mind you can always request to go exactly to OE specs if you want
Got 5 yrs XP and they didn't want me 😭
How the hell is this a discount tire and you guys arent forced to wear a uniform like the rest ive been to
What's the brand of the tire changer??
Ruben Soto COATS
Why is he wearing stir ups
I’m just a guy sitting in my car up in the air
Didn’t even have to get out or remove my wheelchair
Is it hunter??
its a coats
SLOOOOWWWWWWW
Daniel k I mean I wouldn’t be trying to kill myself for 12 bucks an hour either
Stephen 123453 Lmao
@@stephen123453 right
All daaaaay bayv5 head ass
Can i get a plastic duck bill for my rims please!😁
ILC34 🤟🏼
Hey I work here
AZP_03 home for life
hi seth
We would be castrated for changing tires that slow lol, 4 minutes is a one time start to finish and an all four is 8-10, we run mirror, keep it up though man. txd_23 👌
txd_93 checkin in
Txd_48 the best one
Yall cant beat me mn05 I will catch a ti let and run these ones let's goooooo
Wtf?
txd 31 checking in
yall dont even need to wear the uniform?
Some people shouldn't own vehicles.
3 minutes to change one tire? Put the GoPro down and work on that speed.
Boi tf up thats regular speed u want him to do it in 30 sec?
THE HUMAN CRUMB. Yes actually. My boys can do it with probably half the experience. Lol
@@sig716patrol7 😂
Seriously. Slow ass
I ripped a new tire on my first day 😐
The assembly came off the balancer my first day lol
@@ashtonduns4589 How does that even happen? 😂
i deflated someone’s tire during an air check within the first month or so lol
@@jaden.313 HOW???
@@pksdizzy2436 idk the valve core just flew out when i took the hose out of the valve stem. i’m assuming the core was lose but idk🤷♂️ it went completely flat😂
Every time I go to Discount Tires, the front desk guy always gives me the same bait and switch routine.... "I'm looking at my inventory and I don't have those tires in stock, but I do have similar brand in stock".
well have them order the ones you want then
Yeah it’s not really a bait and switch thing from what I know as an back room employee they’re generally pretty honest about what we have
Can’t call it a bait and switch if we don’t have it. If you want something ask them to order it.
So use your communication skills to try and get better tired for the same price. Theyll make a deal to get your business that day
why wouldn't you just order the exact size and brand online and make an appointment?
I got my McDonald's order before he mounted the fucking tire you know McDonald's takes fucking forever
store looks wack af
I’m smoking anyone in a race 👌🏼
Bet
No tf your not. Let's go baby
How are you doing, bro? Can you please tell me how much you can earn with this job?
Estimate hourly rate you get would be 15 dollars an hour
Okay but what store can you wear white fucking pants
dress code???
Mcdonalds
Baran MK6 came in my first day in a McDonald’s uniform and they sent me home 😀
Welll I probably won’t do business there but my guy still going to take his truck I made appoint and woke up early on a sat urday waited there they never showed up left I won’t be blown off like that I called made appointment they gave me a time gave my name make model just really bad business no phone back no opology need new person to run that place Anaheim location oh and they blocked yelp lol so I can’t yelp lol
AZP53 better than all
Nate Plemons TXA01> y’all
No your not guarentee.
damn this seems like communism compared to the shop i work in
what do u mean by that lmao
Took him 3 almost 4 min to change a tier and balance. Low key can do that in 1 min
Jose Maxines are you god?
@@Generalusuer he must be the one that all tire stores are looking for, if this man can take tire off, change its stem, put new tire on and balance in a fuckimg minute. Damn 😂 he could finish a car in under 5 min. Hes god
Jose Maxines my dude, you can’t even spell
No you cant the machine mathematically wouldn't allow you to do in one minute while following best practice. Maybe 2.5 and end with 9 min bay time 4 new after tourquinf quit capping be humble
@@nathanthompson8545 the old machines when they were not electric and used air to turn the motor it was possible but our changers suck now since they can turn at a certain speed. Reason on why they changed is that people were scratching and it was a bit dangerous
Not impressed whatsoever. That’s how you screw up somebody’s shit going so fast trying to be a hero.
I'm sorry, but for a discount tire tech that was actually pretty slow.
You sir are wrong. Your store probably can only handle 60 cars a day . Let's go all day baby your store .
@@nathanthompson8545 60 cars a day? My store see like 150 a day?
@@larrybuttboy5787 same with our store about 150 to 180 a day
if i ever had to wear that shit i’d quit instantly
bro idk why he dressed like marry poppins the drip at cal_29 is fire
I could beat any of you in a race. Mnm05 come see me anytime .
Cas28
Bro what... you where using a tire cage on a tire that required 38 psi 😂
How tf it take you 3 min to change one tire you would’ve gotten yelled at if you was at my store
Lube the tire on the ground..... not on the customers wheel...
All day let's go
We live it on the wheel too
Lube
Smh take some pride in your work.
I can change 3 tires in less than 4 minutes with rebuild included 😈
You're full of shit buddy lmao.
@@user-cs8oe4oc9t nope I'm just good at it
@@devthemechanic i know for a fact you can't change and replace 3 tires and tmps within 4 min. Drink some coffee you still dreamin
@@user-cs8oe4oc9t nah im on a different level
@@devthemechanic you're only lying to yourself lol