Suzuki Samurai Cooling System Upgrade Part 2
Вставка
- Опубліковано 23 тра 2018
- Part 2 of my cooling system upgrade video
. When planning on a turbo or supercharger a cooling system upgrade is always something you should think seriously about. Turbos and superchargers make the engine run hotter which is why the need for better cooling!
~-~~-~~~-~~-~
Check out my latest video: "Hybrid Diff Part 3: Trussing and Armor"
• Suzuki Samurai Hybrid ...
~-~~-~~~-~~-~ - Авто та транспорт
Nice.
Keep up with the videos.
Thanks, and thanks for watching Zuki Evolution!
Great video! I hooked up!
Good deal, glad my videos helped!
Thanks for watching Zuki Evolution!
Great videos. Thanks for putting the time in making them. I have a 98 'coily' that I need to replace the coolant system and this was very informative. Which radiator and hose kit did you use? Thanks
i have 98 coily also i did buy that radiator from lowrangeoffroad but its little shorter than stock one and i had to make some adjust to fit the stock shroud , i didnt see that diffrence from stock one infact i see the stock one little better , but i still have little problem overheating i live in qatar and the weather here in summer 45 mornning and 34 at night and i run ac also , now im looking for a bigger radiator but i dont know what cars radiator will fit on samurai and im thinking to buy 2 elictric fan one in front and one on back of radiator mybe that will help , i hope someone give my some ideas .
I get nearly all my stuff from roadless gear in montana!
Great videos. I love all of your videos. Do you have any that show the replacement of all of the cooling/waterline hoses? The kit I bought comes with hoses to replace all lines.
Thanks for the kind words man, i really appreciate it!
The only videos i have of cooling system is when i put in a new radiator and electric fan a couple years ago.
Thanks for watching Fabbin Adventures!
hey buddy, nice work, very clean, very well explained, i like it, and, i like that Zook too, i just bought an 95 Zook, with some few extras on it, like a rockyroad 8" coil conv, rear mech locker, 6:5:1 rel, 33 swamper, and includes a 8v G16A, but right now, i'm looking for some other bigger rad to run this a bit fresh, which u suggest to use it as tracker, grand vitara, vw, honda? right now, and rebuilding engine, i share your idea about take oem fan off, any suggest its definitely an honnor, pretty nice work you've done on it, btw, this zook its also green, not so brigth as yours, u get the point, keep goin buddy, this is the way i love youtube channels
Thanks for the great compliments my friend! And thanks for watching Zuki Evolution. Stay tuned for more episodeds in the new year!
Hey nice video! Very informative and helpful. I recently bought a Samurai and I have this same kit I believe already installed. I wanted to know how your fan is hooked up? Mine is a toggle switch that I have to keep running all the time.
We're you able to wire the fan into a temp sensor or something?
Yes its thermostatically controlled. Pretty sure my video or description has the part numbers.
Thanks for watching and commenting!
I have new hoses and new water pump and new timeing belt also new starter to install,but after watching your video I think I will order the aluminum rad from roadless gear to complete the install Do you have a block heater in your sami ,I was thinking of a inline circulating heater but not sure if it will work on this engine,what do you think,Your videos are great Thanks
Great to see guys enjoying my videos!
Yes i have a little block heater that goes inline right before coolant enters the block, seems to work pretty good!
Thanks gor watching Zuki Evolution!
Please explain the details of differences in stock and new radiator as I am also having overheating problems in my jimny and my ambient temp is 50 Celsius hot as hell.
The stock radiator is about 26mm where as performance is 40mm but having ambient temp of 50 Celsius my vehicle stays at 110 Celsius and I'll blow my gasket like that. So your experience would suggest the best method to cool my engine.
Why used red silicone gasket maker when all new water pump for samurai comes with a gasket and should have shown how water inlet pipe at back connects to the water pump. And do we need to take timing cover and crankshaft pulley out just to change the water pump on a g13a engine ?
Why not, no leaks yet, and yes i believe you do, but its been a long time since i looked at it.
Just saw this video and would like to know what electric fan did you use??? Thanks!!
Isnt the part number in the video some where. I made that video a long time ago and im thinking i put the part number in the video some where.
Ill see if i can find a part number when i get home from work.
Thanks for watching, subscribe if you havent already, im putting videos out every friday!
I saw you used dexcool orange fluid. Any reason for that?
I believe it is supposed to be for aluminum radiators. I have regular green in it now though.
Thanks for watching Zuki Evolution!
Where do you get the part for your Suzuki ?
What part are you referring to?
All the part for the cooling sistem that you just installed, thank you and have a nice day . Nice videos I’m learning a lot .
The music is tooo loud to hear you.
I know, something has gone on with some of my vids and i cant fix them. I gotta get ahold of youtube to see whats going on, sorry about that.
Thanks for trying to watch Fabbin Adventures! Check out the newer content. Ive made some major changes in audio, video and content!