I been avoiding this script because I thought it was a lot more complicated to set up and a ton of mining ships on the workshop have it so I avoided them. Now I can't wait to set it up
Thank you for this. I've not been using it because I was scared of getting it all set up but this was so simple. I have an autominer stockpiling ice for me now.
I enjoyed it. Your walkthrough was perfect for me. I had zero issues setting this up and that almost never happens to me. Thanks so much for a great tutorial.
Nice, have biuld vertical mining ship with this script, now I have like 20 square holes with 5km radius. Is nice to look how this drones flying back and forth.
Depth how deep drills will be pushed into terrain, for example your ship are 15m above ground and ore is shown like 30m deep. You need to have working area depth around 50m to make sure you get all ore
is there anything specific that needs to be set or done or configured to have the mining area hologram show up? i'm not seeing it and i'm not sure how to get it to go
Due to the way this works, by remembering the path you take, it will need to be stationary as long as the miners are being used. you would have to park while using it and not move until the job is done to use a moving vehicle.
Actually it misses some basic functionality the built in autopilot does, albeit in a broken way. Using a connector to charge, patrol and come back to the same connector. I've not found a way to do that with PAM as it needs 2 connectors AFAIK
So I have a problem with the PAM. It relleases from the connector and the batteries go into recharge mode ? Anyone knows what's happening ? =) I have to send it off every time aswell
Make certain you watch 2:35 that may help you, if you have done all of that, I am unsure. Also be sure you tag your sensor with [PAM] as well as show on hud under the sensor options.
It will only work on the beta servers right now if you don’t have the beta installed you should be able to install it from the ready to install section on the Xbox hope that helps You would also need to get the code from the steam workshop as it’s not on the Xbox version of the workshop
I been avoiding this script because I thought it was a lot more complicated to set up and a ton of mining ships on the workshop have it so I avoided them. Now I can't wait to set it up
Glad I could help!
Thank you for this. I've not been using it because I was scared of getting it all set up but this was so simple. I have an autominer stockpiling ice for me now.
oh man, new to SE and this is exciting, thanks for sharing and good job!
thanks for this vid. it made my ship so much better
Glad it helped!
I enjoyed it. Your walkthrough was perfect for me. I had zero issues setting this up and that almost never happens to me. Thanks so much for a great tutorial.
Best teaching style is far . Concise thanks
Clear and concise. Just what I was looking for.
Nice, have biuld vertical mining ship with this script, now I have like 20 square holes with 5km radius.
Is nice to look how this drones flying back and forth.
For anyone wanting something pre-made Spite makes great PAM miners under their ISL range of ships, I find the quarry vertical miners best on planets.
Very cool, I just downloaded some of his designs, ended up here trying to learn more about the script.
I love ISL ships
Loved this. Will sub and try these out later tonight :)
the beast miner has overrides for the thrusters built into the programmable block and throws your ship upside down and destroys it
Can you explain what the depth options mean, like depth stone
Depth how deep drills will be pushed into terrain, for example your ship are 15m above ground and ore is shown like 30m deep. You need to have working area depth around 50m to make sure you get all ore
that black block at 04:24 has dissapeared for me..... is there a way to get it back?
Probably too late. But then maybe it helps others. You go to your grid menu (I think it's K), go to "Info" and click on "Show sensor area".
great video, great explanation. helps a lot, thanks man
Glad I could help!
is there anything specific that needs to be set or done or configured to have the mining area hologram show up? i'm not seeing it and i'm not sure how to get it to go
Yeah, you have to go into the info tab and make certain Show sensors field range is set, as well as setting the sensor to "show on hud"
@@KnowBotty thanks! That did the trick. So much easier now that I can see the area to mine in. Time to start a fleet!
@@KnowBotty thank you! I couldn't get it to show either 😳
Good work man!
Is there a setting to have a circle with a radius instead of a square shape?
Is it possible to set a moving vehicle as home?
Due to the way this works, by remembering the path you take, it will need to be stationary as long as the miners are being used. you would have to park while using it and not move until the job is done to use a moving vehicle.
I've done everything right but the LCD don't show anything do you have a solution for that
Actually it misses some basic functionality the built in autopilot does, albeit in a broken way. Using a connector to charge, patrol and come back to the same connector. I've not found a way to do that with PAM as it needs 2 connectors AFAIK
Simplesmente incrível
Thank you!
So I have a problem with the PAM. It relleases from the connector and the batteries go into recharge mode ? Anyone knows what's happening ? =) I have to send it off every time aswell
help, it wont show me a hologram of the mining area what should I do?
Make certain you watch 2:35 that may help you, if you have done all of that, I am unsure. Also be sure you tag your sensor with [PAM] as well as show on hud under the sensor options.
@@KnowBotty omg, im dumb, thats exactly why, thankyou very much good sir, your video was very helpful
Glad to help!
Thank you.
The title of the music please ?
it is really difficult to dock in underground structures, can anyone help in this task, it's making me mad alot.
Hi its work with nano drill ?
Unfortunately I have never been able to figure out how to get the two to work out together, That would be amazing though.
Very nicely done. Most are not well explained
Have you ever made a rover using this script?
Does this work for Xbox?
It will only work on the beta servers right now if you don’t have the beta installed you should be able to install it from the ready to install section on the Xbox hope that helps
You would also need to get the code from the steam workshop as it’s not on the Xbox version of the workshop
That sucks
*cries in xbox*