4:30 AlSi is aluminum silicone. It’s used in the lining of the cylinders/cylinder heads I believe in order to reduce wear to cylinder walls and have tighter tolerances. My old CLK Mercedes with the 3.2 V6 had that
If AlSi is an alloy, doesn't it have to use Metals and Metalloids, thus Silicon, instead of Silicone with is a composite on itself? I find no hydrogen or oxygen in these kinds of Alloys, so it has to be Silicon.
As a major car enthusiast, I appreciate the effort you put into explaining the technical details when designing the engine, as I’m not sure very many people would have! Very well done, now I just have to come up with a check for Elon Musk’s ENTIRE net worth of around $192 billion to pay for this car!
It looks like a Polestar and Rolls Royce came together. I like it because it doesn't look that much like a Rolls but I Def wouldn't pay millions for it. I'd probably pay a solid 400k or less. The rear also looks like a Buick
@@lbnewell23still not a dual clutch. Too lazy to explain but if you look into it they’re still not like a dct. They are very very very good transmissions though
@@sebastianhasbun3846 The 9HDCT transmission is the world's first transverse P2 hybrid 9-speed wet-type dual clutch transmission. I know it’s not the same as a conventional dct. But it literally is a dct because it has dual clutches
@@Aderin. it is just a trim level at this moment... they dont actually design a car from the ground up they just take an fully optioned S class and make it more luxurious and better aka a trim level
If you were tasked with making a car for/based on someone, what would it look like? Based on your experiences of that person. You were to make a car for, say your dad, what kind of car would it be, what would it look like? Color? Styling? Engine? Handling? All that jazz...
am i the only one that just now realised that modern luxury cars are all forced induction so that they can have all the performance with less displacement?? less displacement -> less weight in the rotating assembly -> easier to make the engine have no vibrations
Ngl i made a d-series variant in beamng with mods it has a top speed of 724 mph. It did the quarter mile in 5.2 seconds. Its the most insane thing thing ive ever built and ive made a lot of vehicles in beamng. Great video keep up the good work!
fords 10 speed is a triple clutch trans so i guess thats the closest to a 10 speed dual clutch also i think .175 is the lowest production drag coefficient so not to far from yours
I just wanna say, I buy mostly AMGs now, I used to be into sports cars, but having a fun, fast, well built car, well that's just better with 4 doors, bonus points for wagons
Honestly suprised luxury cars ARENT made out of steel or something of that nature. It just FEELS strong and durable. Cheap shits made of aluminum drink cans, fast stuff made out of carbon fibre, nice, luxury stuff made out of heavy strong steel.
The fastest production car is still a Bugatti. Their Chirone Super Sport. Really inspiring name if you ask me. It hit 304 mph on a track. But I wanted to say that it at least is a production car unlike the ssc tuatara that you mentioned which has sold only one unit.
I do agree that RR and Bentley are the best cars to point A to point B but only a short amount of time before you need to go to the gas station. Because of how heavy they are, they only get from 17-18mpg.
Half unrelated but I saw this first after fixing my Opera GX (it got corrupted and I fixed it, then waited about a day for it to update because it was finally able to after being fixed by me, then I went on UA-cam using opera for the first time in ever and then I see this and a sponsor calling it good. Now that it’s running, it’s brilliant! Just make sure to keep an eye on it and have a VPN.)
The Top Fuel Dragster going 335 mph in 3.62 seconds: I have still won in acceleration, speed, but not time. (It is because top fuel dragster can only stay on for like 5 seconds)
I keep seeing maximum hp and how much horse power can I put in the small engine I think it would be fun to see a maximum torque truck and how much it can haul
i like this usually luxury cars have such large engines with such potential but are either mechanically or electronic limited take the toyota cenury for example V12 with only 276bhp smokey nagata comes along and shoves an ECU tune on it and boom, 1000hp
In regards to the gearbox - Mercedes features a 9 speed multi-clutch transmission so that's the highest in the market for double clutch technology and FORD-GM has a ZF8HP derived 10-speed auto with two extra ratios to I think ZF8HP70 or ZF8HP90 iirc.
Could you do a tutorial on how to design cars like you? I find your dedication and skills truly amazing and id love to learn how to properly design a car the same way you do in automation! Maybe even tell us the mods that you use for cutouts and stuff.
This is the Fastest 1/4 mile ever 3.58 secs @ 386 mph (621.61 km/h)Santa Pod dragstrip is the venue in which the current world drag racing record, a time of 3.58 seconds...
It would be awful, torque modulation would be extremely difficult to get moderately smooth at those output numbers.. Anyone with a sense of drivetrain discernment wouldve added a torque converter..
Press F to pay respects to traditional web browsers. Download Opera GX for FREE: mtchm.de/36qi8
F
F
F
F
F
Congrats, you made an even more Over the top Rolls Royce. Expect massive sales in the Gulf States
1 comment (me)
sooooooo....
A Toyota Century?
Msrp starting at 800,998$ base
@@SkylineLofe or a mansory rolls lol
Wrong, he made the Polestar from NFS Heat.
Genesis is gonna steal this design
The side of the car literally looks like the G90
To be fair the mod body is literally a Genesis G90 :P
@@TwinTurBros I was right 🤭
This actually looks like a real luxury sedan.
Looks like a project made in the Middle East that never gets released
So basically, every automation player's first car build haha
Exactly
No, I started with shitty cars that have less than 40hp and still make them
My 1st build was Miata style car
A coupe and a sedan are all my first tries. And there are exactly not made for the Gulf states. Unless you living in the Mississippi Gulf.
Not at all
4:30 AlSi is aluminum silicone. It’s used in the lining of the cylinders/cylinder heads I believe in order to reduce wear to cylinder walls and have tighter tolerances. My old CLK Mercedes with the 3.2 V6 had that
@D A Correct, Si being silicon, and silicone being something completely different lmao. My car has an engine like this too
If AlSi is an alloy, doesn't it have to use Metals and Metalloids, thus Silicon, instead of Silicone with is a composite on itself?
I find no hydrogen or oxygen in these kinds of Alloys, so it has to be Silicon.
As a major car enthusiast, I appreciate the effort you put into explaining the technical details when designing the engine, as I’m not sure very many people would have! Very well done, now I just have to come up with a check for Elon Musk’s ENTIRE net worth of around $192 billion to pay for this car!
It looks like a Polestar and Rolls Royce came together. I like it because it doesn't look that much like a Rolls but I Def wouldn't pay millions for it. I'd probably pay a solid 400k or less. The rear also looks like a Buick
Ford and GM co-developed a 10 speed automatic. That is what you'll find in the new F-150s.
There are 10 speeds, but no 10 speed Dual Clutch transmissions :P
@@TwinTurBrosMercedes have a 9 speed multi clutch
@@lbnewell23still not a dual clutch. Too lazy to explain but if you look into it they’re still not like a dct. They are very very very good transmissions though
@@sebastianhasbun3846 The 9HDCT transmission is the world's first transverse P2 hybrid 9-speed wet-type dual clutch transmission. I know it’s not the same as a conventional dct. But it literally is a dct because it has dual clutches
The rear end of that car giving me some Aston Martin vibes tbh👀
Was thinking the same too
It reminds me of the Polestar 2
@@M67v true..
For me it is Tesla.
remember when when the Maybach Mercedes was a thing?
Was? It still is.
@@DeathHead1358 now its just a trim level back in the day it was an actual Maybach
@@memorimusic420 it's not though.
@@Aderin. it is just a trim level at this moment... they dont actually design a car from the ground up they just take an fully optioned S class and make it more luxurious and better aka a trim level
@@memorimusic420 true actually. I do prefer the newer ones but it'd be cool if they made different versions.
automation just got public release! now i can play with UE27 features
If you were tasked with making a car for/based on someone, what would it look like? Based on your experiences of that person.
You were to make a car for, say your dad, what kind of car would it be, what would it look like? Color? Styling? Engine? Handling? All that jazz...
Rolls Royce are already luxurious, how can you make it more luxirious?
that's like impossible. Anyway nice video
My mum loves automation
have you heard of coachbuilt/ its basically Rolls version of what maybach is for mercedes
am i the only one that just now realised that modern luxury cars are all forced induction so that they can have all the performance with less displacement??
less displacement -> less weight in the rotating assembly -> easier to make the engine have no vibrations
If there is no interior then it cant realy be a luxury car😂
How did you bend and mold the body of the car at 7:58? I'm kinda new to Automation and wanted to know for the longest time.
there's an "enable morphing" buttom on the lower right side when editing your trim
It's like Bentley, Bugatti and rolls Royce had a billion dollar child. It's beautiful
Finally, a sedan the Sultan of Brunei says is luxurious enough for his garage!
The ssc tuatara kept lying about numbers, even then koenigsegg is faster than them💀
it kinda looks like a mix between volvo s90(2017-2023) and polestar 2
Ngl i made a d-series variant in beamng with mods it has a top speed of 724 mph. It did the quarter mile in 5.2 seconds. Its the most insane thing thing ive ever built and ive made a lot of vehicles in beamng. Great video keep up the good work!
I have made a car that can do the quarter mile in exactly 5 seconds
12:37 that's the sigar smoke of the luxurious people inside
That looks like Volvo s90 + Bentley flying spur + Aston Martin db7
its crazy how far automation mods have come this gaave me literal shivers down my body , how come ive missed this.
Next video: build the slowest car
Deal
Wow, bro! Keep it up!
A really nice video! ^^
I really love watching your videos! :)
fords 10 speed is a triple clutch trans so i guess thats the closest to a 10 speed dual clutch also i think .175 is the lowest production drag coefficient so not to far from yours
It’s saying in the engine cover TURBO VTEC 💀
so it is a genesis
I just wanna say, I buy mostly AMGs now, I used to be into sports cars, but having a fun, fast, well built car, well that's just better with 4 doors, bonus points for wagons
Honestly suprised luxury cars ARENT made out of steel or something of that nature. It just FEELS strong and durable. Cheap shits made of aluminum drink cans, fast stuff made out of carbon fibre, nice, luxury stuff made out of heavy strong steel.
oh, both my body and rims😍😍😍
The fastest production car is still a Bugatti. Their Chirone Super Sport. Really inspiring name if you ask me. It hit 304 mph on a track. But I wanted to say that it at least is a production car unlike the ssc tuatara that you mentioned which has sold only one unit.
The agera R is the most accessible of the three and with a valid airspeed going wind assisted and not.
@@DontAttme well... You still have to take into account the fact that you need to be rich either way but yeah, there's always konigseggs.
Front: Genesis with Bugatti lights
Rear: Tesla with lower plate
what style car body? like what year and everything
2020 Model 70 Trim 73
@@realherobrine5636 that is not what he means lol
I made an engine that makes 100 hp more than that with his set up
I do agree that RR and Bentley are the best cars to point A to point B but only a short amount of time before you need to go to the gas station. Because of how heavy they are, they only get from 17-18mpg.
Half unrelated but I saw this first after fixing my Opera GX (it got corrupted and I fixed it, then waited about a day for it to update because it was finally able to after being fixed by me, then I went on UA-cam using opera for the first time in ever and then I see this and a sponsor calling it good. Now that it’s running, it’s brilliant! Just make sure to keep an eye on it and have a VPN.)
Why isn't this man just designing cars
I wish xD
Hi TwinTurBros i love your Videos, can you put your Automation creations on the Beamng Forums ? 😅
I use opera and I can confirm it is cracked.
Behold…the most dangerous road car ever made
The Top Fuel Dragster going 335 mph in 3.62 seconds: I have still won in acceleration, speed, but not time. (It is because top fuel dragster can only stay on for like 5 seconds)
Wow, nice Chrysler 300C
If it’s fast, u can’t enjoy luxury
I keep seeing maximum hp and how much horse power can I put in the small engine I think it would be fun to see a maximum torque truck and how much it can haul
Make a GT version
I wish Automation could export better looking assets... its annoying that they get downgraded heavily in BeamNG.
Ima modify it so there is no smoking and help you with handling while braking 😊
> Luxury Car
> Quad Turbo
Already using gx
i like this
usually luxury cars have such large engines with such potential but are either mechanically or electronic limited
take the toyota cenury for example
V12 with only 276bhp
smokey nagata comes along and shoves an ECU tune on it and boom, 1000hp
yes im aware more upgrades than just an ECU tune were done but my point still stands
Basically a koenigsegg Jesko
7:12 the 9G-Tronic by AMG has 9 speed DCTs
Congrats on making a Bentley with a hint of Hyundai
For being an expensive car, it uses cheap engine materials 8:22
Shhhh we don't talk about those
I wanted to add weight xD
Opera gx would be my favourite browser if they paid me too.
0:05 SOMEONE WHO AGREES, YES
yea i mean there’s also mansory
rolfhartge
maybach
Alpina (to an extent)
Maserati
the list goes on
Yes
He says it the fastest production car, 1 year later, the konisegg absolute: 355mph
In regards to the gearbox - Mercedes features a 9 speed multi-clutch transmission so that's the highest in the market for double clutch technology and FORD-GM has a ZF8HP derived 10-speed auto with two extra ratios to I think ZF8HP70 or ZF8HP90 iirc.
Really nice work on the design! What mods are you using, if you don't mind me asking?
bro got extravagant quad turbolag
Basically a Renault Talisman
wow dude just wow u just made a 510km car just wow bro it even looks cool
VTEC power good
The Smoke could be from the Brakes.
It ain’t got no gas in it!
very nice polestar thaere mate, no...seriously its very nice
Fastest car in the world is the Bugatti 300ss plus ..
bro´s giving koenigsegg ideas
Hi, great Video! How do you make the hood ornaments mod work? I thought it was never updated?
Lexus uses a dual clutch 10 speed sequential gearbox in the LC500h and the LC500.
I love these you just got a new subscriber.
It's should be full aluminium
W for chrome cause idc
doesnt the new bugatti hold the record for fastest production car?
Technically not! Cars need to get a speed in 2 directions. Bugatti only did it in one!
7:07 The Chevy Camaro ZL1 is offered with a 10 speed dct
Could you do a tutorial on how to design cars like you? I find your dedication and skills truly amazing and id love to learn how to properly design a car the same way you do in automation! Maybe even tell us the mods that you use for cutouts and stuff.
The most luxurious car ever: a soot machine
People: The Honda V12 isn’t real, it can’t hurt you
The Honda V12: 5:00
Luxury car goes faster than a Chiron
What is this Mod called at 10:48 where you have 5 mm 10mm etc.?
I will only start saying your cars are good when you make interiors
but i dont like interiors :(
Maybe Escalia Lineage was just enough. Taunus sounds too obvious, plus it was the name of a German Ford
12:1 compression is the way to have autoignition. 10:1 is about the limit for road-going gasoline-fueled engines.
A V12 VTEC??? Oh so, this is an Acura after all.
Shhhh don't tell Honda ;)
You should make a semi that is so powerful it spins tires in 10th gear
15:08 he hit 516 km which is 320 mph
This is the Fastest 1/4 mile ever 3.58 secs @ 386 mph (621.61 km/h)Santa Pod dragstrip is the venue in which the current world drag racing record, a time of 3.58 seconds...
Would buy for real, but only if it smokes when not running.
it kinda looks like tesla and Rolls-Royce had a baby but still it is good
SO basically u made Renault Talisman with V12
i Built a V12 quat turbo that had 4,360hp earlier
Ypu did not beat the record for the fastest production car. It's the Koeniggsegg Jesko Absolute and it's faster than this
Neither of those cars have any top speed records yet, but fingers crossed the jesko smashes the record this year 🙏
Naw, Nissan platinum classes are made for luxury, AND THEY INCLUDE TRUCKS
Mercedes uses 9 speed DCT on some models like GLC250 or some 250 classes…
My best self-creation has a Topspeed: 270MPH / 434km/h
Looks like that one car in Dr.driving
That dual clutch would probably be jerky in stop and go traffic
It would be awful, torque modulation would be extremely difficult to get moderately smooth at those output numbers.. Anyone with a sense of drivetrain discernment wouldve added a torque converter..
Maybe it's a wet clutch instead of the common dry clutch. Newer wet ones are much better at stop and starts
You ruined it, there are no suicide doors on it.
Uhhhh UHHHHH
Dang I forgot xD