You guys just got a huge update on the coilovers literally this morning! They are on the delivery truck and will be to me by the end of the day! Videos will be coming!!
Just for the future, purple power is not safe on aluminum. This is why you got all that staining. But since you're painting it, it doesnt really matter. Paint job looked good though👌
Next time, just cure in the sun. I did an outer primary cover for a Harley Davidson this morning. It came out perfect. There were a couple spots that I didn’t like so I resprayed a little extra to touch up and put it back in the sun. It has come out surprisingly well. Almost full proof.
always awesome to watch your how to vids. The wrinkle black looks the best when it comes to painting your valve cover. I did that with mine also. I know its in hind sight but if you do a valve cover again to cut a little time off, the holes where the valve grommets are, are the same size as a quarter. I used quarters to cover them up. But valve cover looks good!!!
@@RefineMovement the one in the video is black, if I want red, is it possible if I spray another red paint over the wrinkled paint? because there is no red wrinkle paint here.
I did this on my miata cover a year ago and didn't do a thick enough coat, so I'm back now to reapply and hit some other parts while I'm at it ;) Thank for the tips and the video!
followed the same procedure and it came out great did everything minus the heat gun overall a great cheap paint job it was only 12 bucks cured great looks awsome 👍🏼👍🏼
Oh heck about shooting some later! Nobody will care after another 100 years, or maybe a couple of years. Great job done, thank you for sharing your vlog.
I’ve had luck getting the paint off of the “Honda” letters by just using a scraper. Wait til it’s dry to the touch but before it’s completely cured and the paint will just scrape perfectly off the letters and “H” symbol. I’ve also seen people use chap stick on the lettering so the paint just comes right off.
Great paint job , I'm gonna do the same except what I am gonna paint is an old dentist arm boom that held the tray / tool / drills , it's a huge unit because it attached to the chair that you sit / lay back in .....I'm gonna separate the spittoon rinse and vac hoses... I'm just going to use the articulating boom arm for my coin / electronics microscope ..... It's going to resemble a AMSCOPE arm and the price was right .... FREE .... Saved me 300 bux ....
Dude!!! Car is looking nice! Just wish you had done this video 5 years ago before I painted my engine cover(D15). I painted it white but it was my daily so I had to rush it, but in the end still looked not too bad. But cars are looking better and better. Love the channel guys!
Haha thanks man! 5 years ago I had no idea I’d be able to have a second car that was just a project! I know the feeling about having to make sure something gets done on time when it’s your daily.
How to do a good job on the raised letters? Masking or sanding? Answer: Neither one. Spray two medium coats of paint with just a few minutes flash time between them. While the paint is still wet, use a SMALL rag (cotton t-shirt type) and some aerosol carb & choke cleaner. Stretch the rag over the tip of your index finger and wet the tip of it with a quick spritz of carb cleaner. Very carefully use your fingertip to wipe the paint off of the raised letters while it's still wet. Turn the rag very frequently as it saturates quickly with the still-wet paint. It need not be perfect at this stage. Set the part out in direct sunlight to cure it. The sun heats it far more evenly than the heat gun can. The part will wrinkle in just a few minutes. While it's still hot and "soft", the rag and index finger can then be used again to get the letters perfectly clean. No grinding, no sanding, no masking. Before handling the part too much, let it dry overnight to harden up well.
I will try to do this on my d16y8 valve cover with one change. Before painting I will try to polish letters and after painting clean fresh paint from them with scalpel. It should be easier to do. Greetings from Poland!
Hey man you could try using a long flat file or a large flat sanding block to get those letters all in one hit amd keep them flat no low spots no round edges 👌
Thanks a lot Anthony! Try it man. Easy process really but bring your patience with you lol. I had a lot of fun with it anyway so I hope you do too if you do it
Haha thanks for remembering man! But yeah, it’s hard to not want to do my best at it. Then I see the result and I want to do another one now and really make it special. But you know the feeling!
Nice job Robbie! I can't waitto do the same to my swap when the time comes. I feel ya on the restoration aspect. I'm probably going to strip the rear on my hatch and possibly paint that too. Maybe a rear harness wire tuck
Thanks a lot Ted! I’m happy to hear you understand on restoring parts. It’s really rewarding man and making one part new at a time adds up to something really nice
I wanna do my bike exhaust...i think I'm gonna use the wrinkle-paint , first... Then after it dries , hit it with their low-gloss black header paint.... That should cover blemishes .
Finally !!! Haha, quick question y don’t any of you guys have upgraded motor mounts? If both builds are for circuit why has that not been addressed, I swapped mine and the difference is so much better, love the vids keep on building.
Yeah, upgraded motor mounts are something both of us want to get. There’s just so many things to buy for these cars it’s really just a case of they are on the list of to-do’s
Idk if you still reply to comments, but any suggestions for what to do if you have rounded bolts on the brackets on the cover? Mine are kinda siezed to the valve cover and the bolt just gets round when I try to take it off.
I’d say yes if you’re going with a lighter color so it pops more but if you’re just gonna do black or anything dark I don’t think it would really matter cause it’s textured
Can this work the same process with plastic Valve covers mine is plastic on my 2010 Corolla XRS I'm looking to do Red and paint the VVT-I word in White
Been awhile since i watched, i last left off on the last engine swap, this is the VTEC D series correct? Because you said you had the busted engine, but i know you had 2 VTEC swaps?
You guys just got a huge update on the coilovers literally this morning! They are on the delivery truck and will be to me by the end of the day! Videos will be coming!!
Refine Movement hell yea can't wait to see how she sits with your wheels and tires.
Nice!
Refine Movement can't wait man hope you guys are excited
What are those plugs for the ones that are broken that go to the distributor
Refine Movement good job little brother
I love this guy’s energy. Is probably super fun to be around. That’s what the world needs more of.
Seriously. Very positive energy
Just for the future, purple power is not safe on aluminum. This is why you got all that staining. But since you're painting it, it doesnt really matter. Paint job looked good though👌
Next time, just cure in the sun. I did an outer primary cover for a Harley Davidson this morning. It came out perfect. There were a couple spots that I didn’t like so I resprayed a little extra to touch up and put it back in the sun. It has come out surprisingly well. Almost full proof.
Dude. I've watched quite a few of these and yours turned out waaaaay better than everyone else's. Good work dude
Looks great.
When I did mine years ago I used chapstick on the areas I didn’t want paint. Once the paint was dry it came right off.
I’m five years late I know. Searched to see if I wish to go wrinkle paint on my valve cover. Really enjoyed the presentation. ❤️🇦🇺
It is very satisfying bringing old parts back to new looking.
Came for the valve cover job, subscribed for the vibes 🙌🏼
the purple power is what's causing your discoloration. It's pretty strong for aluminum if it sits more than a minute or two
Skip to 12:35 to see the valve cover being painted
14:08 what a difference. Awesome!
Canada here..nice n clean, organize wires, and, lol...huile is pronounced "will" w a "h" in front...keep turning that wrench... one love
always awesome to watch your how to vids. The wrinkle black looks the best when it comes to painting your valve cover. I did that with mine also. I know its in hind sight but if you do a valve cover again to cut a little time off, the holes where the valve grommets are, are the same size as a quarter. I used quarters to cover them up. But valve cover looks good!!!
Thanks for the advice man, I’ll remember that for future
@@RefineMovement the one in the video is black, if I want red, is it possible if I spray another red paint over the wrinkled paint? because there is no red wrinkle paint here.
I did this on my miata cover a year ago and didn't do a thick enough coat, so I'm back now to reapply and hit some other parts while I'm at it ;) Thank for the tips and the video!
That heat gun is the magic! I did mine awhile back and without the heat it didn't come out this good. Now I know for next time! Thx!
followed the same procedure and it came out great did everything minus the heat gun overall a great cheap paint job it was only 12 bucks cured great looks awsome 👍🏼👍🏼
It turned out very well looks awesome I can't wait till you guys finish the cars I'm really excited for some good track content
Gotta love that FL Summer rain. Looking good man.
I don't know who you are but you deserve more than 20k subs!!!!
Cover turned out great! Hell of a job! Keep on wrenching!
Thanks a lot man, sure appreciate your encouragement!
Oh heck about shooting some later! Nobody will care after another 100 years, or maybe a couple of years. Great job done, thank you for sharing your vlog.
I’ve had luck getting the paint off of the “Honda” letters by just using a scraper. Wait til it’s dry to the touch but before it’s completely cured and the paint will just scrape perfectly off the letters and “H” symbol. I’ve also seen people use chap stick on the lettering so the paint just comes right off.
You left handed? i couldn't imagine painting with my left. I'd mess everything up...
Also, nice job!!!
Great paint job , I'm gonna do the same except what I am gonna paint is an old dentist arm boom that held the tray / tool / drills , it's a huge unit because it attached to the chair that you sit / lay back in .....I'm gonna separate the spittoon rinse and vac hoses... I'm just going to use the articulating boom arm for my coin / electronics microscope ..... It's going to resemble a AMSCOPE arm and the price was right .... FREE .... Saved me 300 bux ....
Dude!!! Car is looking nice! Just wish you had done this video 5 years ago before I painted my engine cover(D15). I painted it white but it was my daily so I had to rush it, but in the end still looked not too bad. But cars are looking better and better. Love the channel guys!
Haha thanks man! 5 years ago I had no idea I’d be able to have a second car that was just a project! I know the feeling about having to make sure something gets done on time when it’s your daily.
How to do a good job on the raised letters? Masking or sanding?
Answer: Neither one.
Spray two medium coats of paint with just a few minutes flash time between them. While the paint is still wet, use a SMALL rag (cotton t-shirt type) and some aerosol carb & choke cleaner. Stretch the rag over the tip of your index finger and wet the tip of it with a quick spritz of carb cleaner. Very carefully use your fingertip to wipe the paint off of the raised letters while it's still wet. Turn the rag very frequently as it saturates quickly with the still-wet paint. It need not be perfect at this stage.
Set the part out in direct sunlight to cure it. The sun heats it far more evenly than the heat gun can. The part will wrinkle in just a few minutes. While it's still hot and "soft", the rag and index finger can then be used again to get the letters perfectly clean. No grinding, no sanding, no masking. Before handling the part too much, let it dry overnight to harden up well.
I will try to do this on my d16y8 valve cover with one change. Before painting I will try to polish letters and after painting clean fresh paint from them with scalpel. It should be easier to do. Greetings from Poland!
Hey man you could try using a long flat file or a large flat sanding block to get those letters all in one hit amd keep them flat no low spots no round edges 👌
that’s a good idea too!
love your energy, nice work
Looks wayyyy better with the fresh paint!! Good job 👌
Yo thats damn beautiful
Good stuff... this guy seems real friendly... good video man👍
Good job bro looks awesome! Them Polish groments look really clean, make valve cover pop.. they compliment the blk
Thanks a lot man! it was a real fun process, I’d love to try painting another
I just did the same with my trackcar like a month ago..awesome!
Oh nice! You happy with how yours came out?
Refine Movement i would have like to get more wrinkles in it but its not too bad lol. I also didnt sand any of the letters or emblem so its all black.
Came out great for it being your first time. 👌
Came out great for a 1st timer. I'm going to start doing some jeep parts. Looks easy
Thanks man! Have fun with the Jeep project!
The lithium grease is to seal between the boot and the valve cover hole.
Actually came out pretty good... for your 1st time.
Great job on the valve cover! I may end up doing this myself to refresh my own eventually!
Thanks a lot Anthony! Try it man. Easy process really but bring your patience with you lol. I had a lot of fun with it anyway so I hope you do too if you do it
@@RefineMovement think this would hold up on my dirtbikes valve cover?
Great video, the rocker cover and the other bits look fine, keep up the good work. 👍🏻
Is it mandatory to use the heat gun or can you just let it sit and same results will happen?
I am pretty sure that sanding block is supposed to be used to clean your grinding stone when it gets gummed up with paint.
That looks fantastic!!! 👍🤩 thanks for the paint tips broski!!! 🎨 👨🎨
Need to put hondabond near the distributor. It's in the service manual.
Graphic designers tend to be perfectionists, that's why and what I'm goin with because I am one too.
Haha thanks for remembering man! But yeah, it’s hard to not want to do my best at it. Then I see the result and I want to do another one now and really make it special. But you know the feeling!
If you run a racing oil with a deterrent like Royal Purple, it'll help get rid of all that carbon
Valve cover came out awesome btw
Nice job Robbie! I can't waitto do the same to my swap when the time comes. I feel ya on the restoration aspect. I'm probably going to strip the rear on my hatch and possibly paint that too. Maybe a rear harness wire tuck
Thanks a lot Ted! I’m happy to hear you understand on restoring parts. It’s really rewarding man and making one part new at a time adds up to something really nice
That's Baddass!! Love it!
Looks Great man
Looks good Rob!
I wanna do my bike exhaust...i think I'm gonna use the wrinkle-paint , first... Then after it dries , hit it with their low-gloss black header paint.... That should cover blemishes .
nice painted valve cover civic d16y8 clean valve cover
really nice job on this
Looks so good man
Thanks a lot Daniel! Nice when putting in the effort pays off
Refine Movement for sure you come a long way its coming out so good cant wait for the next video
Finally !!! Haha, quick question y don’t any of you guys have upgraded motor mounts? If both builds are for circuit why has that not been addressed, I swapped mine and the difference is so much better, love the vids keep on building.
Yeah, upgraded motor mounts are something both of us want to get. There’s just so many things to buy for these cars it’s really just a case of they are on the list of to-do’s
Great choice in color. Not into the red valve covers unless it comes from factory that way.
Thanks man. Yeah, I dig the black. Red on d series just doesn’t fit in my mind.
Is there a reason to not put primer on before the paint? I was informed to put on primer, but now Im wondering if its even needed.
I will do this on my civic ph16 soon! Thanks for the vid! 😂
Should have used rubbing alcohol or brake cleaner to prep the valve cover. Purple power works great for degreasing parts, but leaves a residue behind.
Clint Stathis Acetone works wonders
Civic D16 BR did he use acetone? If so I missed that.
Clint Stathis Just saying. Easier to found
Use Rust-Oleum aircraft paint remover
Is it good to put Matte clear on it ?
Came out very nice, bro! 😎
What’s the point of the cardboard if you paint your driveway anyway?
Next time, just use a flat sanding block and sand paper for the Honda VTEC. Way faster and you can polish to whatever grit you choose.
Looks amazing
Dude VHT put YOUR engine cover in their pictures at amazon :D Good job!!
What! I have to check it out, thanks for telling me
@@RefineMovement yeah i searched it and there was your motor cover :D Best regards
Idk if you still reply to comments, but any suggestions for what to do if you have rounded bolts on the brackets on the cover? Mine are kinda siezed to the valve cover and the bolt just gets round when I try to take it off.
Where did you get the chrome bolts? Nice touch!!!!!
I'm doing mine right now
How did it go?
@@RefineMovement turned out great! Thanks for the video
Now you need to wrap them heaters!
I think you could use sandpaper on a wooden block for the lettering. Those stone tips arent for this kind of work.
Can I use sandpaper instead when removing the paint on "VTEC HONDA"?
Probably yeah. Get a low grit so you can take the paint off easier then smooth it out with a higher grit I would guess
Great job man!
Did you have to drain the oil out the engine before removing the cover?
No just make sure nothing falls in once the cover is off
Would you recommend spraying the valve cover with primer before you lay down your wrinkle paint?
I’d say yes if you’re going with a lighter color so it pops more but if you’re just gonna do black or anything dark I don’t think it would really matter cause it’s textured
No primer?
Thanks for the video.. I have a 97 coupe with vtec valve .. the question is I can used the valve cover front 95 d16z6 on the 97?
Off the chain son
Thanks a lot man!
Can this work the same process with plastic Valve covers mine is plastic on my 2010 Corolla XRS I'm looking to do Red and paint the VVT-I word in White
Use plasti dip
Did anyone wlay primer before? I primed thinking it best for adhesion
hi Brother how and where can I get a can of this matte wrinkle black im based in india if you could advice would appreciate it
I got it from my local autoparts store but I would imagine you could buy VHT wrinkle paint from ebay or any online autoparts store out your way
Came out great
Is that stuff good for the high temperature? How does it look now?
Still looks great and yeah its meant for high temp
Thanks!!
Could have just used a straight blade on the letter,tape around it and use a sanding sponge
I don't think that ground is grounded. Valve cover is isolated via gaskets.
It's grounded bro, that bolt goes into the engine block.
I have a 95 accord, where did u get the valve cover bolts?
I would think a flap disc would be much easier on those letters
Hey I was wondering, can I tape the logo and vtec logo instead of sanding it? Thanks
Yeah of course. This is just what I did
Thanks!
Use a light coat of vaseline before you spray. Taping it is a PITA and the vaseline method comes out just as good
Does it say heat gun or in the oven just wondering if do it could I just put it in the oven like other high temp paints
You can do the oven or heat gun.
love it well done sir
Thanks a lot Jack!
First of all, congrats to the job, i found it preety awesome!! And, how abrir do the same with the intake righ over there ? I think it Will be good
I love restoring things as well brotha 👌. Great job and im glad you noticed thise chips on the Y8 cover , i gringed lmao 💯.
Nice job! Btw is it worth the OEM valve gasket set over aftermarket, in my country is 3 times more expensive than Elring or Victor Reinz?
Been awhile since i watched, i last left off on the last engine swap, this is the VTEC D series correct? Because you said you had the busted engine, but i know you had 2 VTEC swaps?
This is the d16y8 in here. The d16z6 is the one I had originally bought but ended up knocking as soon as I started it up
Out of interest how many cans did you need to use? Can I get away with 1?
Clean 💪🏼
Came out nice 👍
WoW great looking.
Paint it black put it back nicely done ✔