How to wrinkle paint your valve cover!
Вставка
- Опубліковано 30 кві 2017
- First time ever using VHT Wrinkle paint!
Coinbase Free $10!
Link - www.coinbase.com/join/la_cur
Need help with any type of project?
Link - fvrr.co/3DPiJWp
My PC Build!
NZXT H510 Elite Case - amzn.to/3j6byRN
Sapphire Radeon 5700XT - amzn.to/3vjk7h0
AMD Ryzen 7 3700X - amzn.to/3vkQ8Fi
NZXT Kraken X63 Liquid Cooler - amzn.to/3lMYJxu
Samsung 970EVO Plus 1TB SSD - amzn.to/3pdvNki
Corsair 850W 80+ Power Supply - amzn.to/2Z32oyC
Corsair 32GB RGB Ram - amzn.to/3DRkbr8
Peripherals!
Dell 32inch 4k Monitor - amzn.to/3aMQY4c
AOC 27G2 Gaming Monitor - amzn.to/30pbBS3
Logitech G Pro Mouse - amzn.to/3DSR9ay
Keychron K6 Keyboard - amzn.to/3AUOZ8t
The equipment I use for the creating these videos!
Macbook Pro 13inch - amzn.to/3E4WNa3
Sony A7S III - amzn.to/3FOo8yG
Sony 10-18MM Lens (Wide Angle) - amzn.to/3p7rLtL
Sony 50MM Lens - amzn.to/3DM14yT
Canon G7X Mark II - amzn.to/3n2yvX5
Canon G7X Mark III - amzn.to/3mZTSZb
Rode Video MicPro - amzn.to/30uigKJ
Rode Video Micro - amzn.to/3E4WfRx
Sandisk 128GB SD Card - amzn.to/3paAvzf
Tripod - amzn.to/3mZOSDL
My Social Media:
Instagram - / latommyla
My Store:
Bigcartel - latommyla.bigcartel.com - Авто та транспорт
Heres a trick for the future. Cover all the letters with a strip of tape then tap around the edges of the letters with a rubber or plastic hammer and it trims the tape perfectly to the letter. That way you don't have to sand the excess paint off and risk damaging the paint close to the letters.
Thanks for the tip, might have to do that for my next valve cover I redo!
No problem man, the valve cover looks great. Ive alway had good luck with VHT products.
Thank you, and first time ever using VHT, was amazedddd
You can also use a little baby oil then wash it off. It's still better to powder coat it yourself
sanding it is faster, easier and leaves a fresh , shiny look
the coin trick was clever.
+UberPare 👌👌
Wow, it came out really good. Wasn't sure what to expect before watching the video. Good job!
Dope! Excited asf to grab the black VHT and do my valve cover, thanks for the post!
Your welcome, goodluck!
Now I know, Aircraft Remover is the main culprit of missing aircrafts that vanished in thin air in the history of aircrafts since day 1
Hahaha!
The plural of the word "aircraft" is "aircraft" NOT aircrafts!
@@mrfester42 this guy did arts and craft in school instead of arts and crafts like the rest of us.
@@katinalovesham Good one!
looks really good. gotta love that feeling when you even surprise yourself.
Hell yeah!
Thanks a bunch chief. Definitely gonna try this on an f20b valve cover. Going in a blue on blue cb7 accord. I think the red would look sweet under the hood.
Dope video dude! I gotta re paint my intake manifold so this definitely helped. Also your car is sick man
Just subscribed today and I love you're content! You add little tips and tricks on how to do certain things which is nice and makes it easier
Thanks man, glad my videos help you out!
Etch primer!! Failing to prepare is preparing to fail, and you just DID!
Love to see all these you-tubers who actually prove that the internet is a billion miles wide for knowledge but only 0.001inch deep. Proof that know EVERYTHING you see is best practice.
SiliquaeSid you don’t use primer on vht wrinkle paint
holy shit you easily gained 10hp+ with that wrinkle red ! :) it's all love hommie , looks so good !
Great work. Very satisfying to see all the old paint off haha
Thanks man, and yeah it was!
Awesome Job Bro, it looks sick dude 🤪🤙 Jay
Oldest trick in my book. Good job bro💪
That shit looks amazing. I'm so mad VHT doesn't make wrinkled green. I need dark green to refinish old cast steel reloading press's. Now I think I'll just use Red or black wrinkle then go thin coat of green and it should work. I should've used red on my powder measure 🔥
You should use a wire brush to get those little bits of paint in those tight crevices that weren't removed with the paint stripper. It's probably not a good idea to leave them because those are the areas where the new paint will start peeling a lot sooner than you would expect!
For covers with embossed lettering or dips you don’t want to paint, use play-doe or model magic to mask it.
Even coats is the key did this on my b 16 in black sanded the logos the next day with 400 grit then a 1000 came out looking factory never thought to use a quarter for masking great idea
+50HP
I think I’ll do my 40 year old Kennedy 520 toolbox black , good job kid 😎
Super clean bay
Thanks so much for these videos! I just painted my valve with the help of your content! Good job can't wait for it to cure :)
I’ve found that it is totally worth it to let the paint cure fully...if the instructions say “cure for 24 hours”, do it.
Otherwise when installing the part, any little metal contact makes a scratch that just ruins it.
imho
a pressure washer works great after you apply the striper and wait for it it bubble up. then hit it with the pressure washer and it comes right off
sorry to be off topic but does anybody know of a tool to log back into an Instagram account??
I somehow forgot my login password. I appreciate any help you can offer me.
@Enrique Charles instablaster ;)
@Christian Luka i really appreciate your reply. I got to the site on google and im in the hacking process atm.
Seems to take a while so I will reply here later with my results.
@Christian Luka it worked and I now got access to my account again. I am so happy:D
Thanks so much, you saved my ass !
@Enrique Charles You are welcome :)
That looks real nice
“Third coat is day agonal “😂😂
😂😂😂
Bruh
???
@@theunknownguy265 watch the video
Dude you are awesome nice work
You can use chapstick on the letters as well and wipe of later after spray
I just did this my valve cover tonight on my b16a2 swap in my eg6 thanks to your video. Love that quarter trick. 👍🏻👍🏻💯💯
Glad it worked out for you!
Password:CRX you live in PA
This is about to be popular
Beautiful garage
Awesome bro. Hear u playing Bob Marley in the background
damn, thats pretty spot on with a $20 spray can, tape, and heat gun. always looking forward on your vlogs, which are awesome. again, nice work!!!
Diy's save you money! And thanks man!!
Savage! No primer? Cooool! If you look in my channel I posted a video 5 years ago of a valve cover I painted wrinkle black. I used a bright lamp overhead so it can wrinkle. It's a valve cover from India off a Honda City. I still have they valve cover hanging on my wall 👍🏽
No primer sonnnn, and I think the heatgun method worked perfectly for me!
Just don't let a model sit on your valve cover. Might get stuck to her cheeks 🤔
You don’t use primer with this…
Which is why it peels off after 6 months use under the bonnet. Same with "exhaust paint" gone as soon as you drive hard. Red hot downpipes? A little more than 600 degrees C. More likely you will end up pissing on them to try to put the fire out (yes I know your rocker cover will, or rather, NEVER reach a high enough temperature to set fire to pain)!
Another sick video!😎
Thanks haha
LATOMMYLA you should check out this forum that just got started up a few days ago by @tommyfyeah its cornerbalanced.com a lot of people of there are into the track racing and performance like me and you!
Ill look into it!
I did mine my self too and as soon as I put the heat gun on it, it wrinkled up perfect.
Glad it worked out for you!
loooks cool even with no paint
my mate used this painy but applied it with a brush on his intake mani. a year or so later its cracking off pretty bad. hows your rocker cover looking now its been a few years? still look good applying it by spraying it properly? wondering if i should use an etch primer before the red
Looks great !
Looks pretty good, brother. Would recommend a primer before you do your next one!
What you could have done is covered the labels on the cover with vaseline using an earbud very gently.....then after paint you just wipe it off because the paint wont stick to the cover because of the greasyness of the vaseline......I've done it a few times and it always works like a bomb
Flawless Victory !!!!
Looks sick might do it to my si
Worth it!
That's tight bro!
Wow the engine looks clean inside
It is
thank you was able to findca website that sells there parts there hard to find ordering strut bars for ek hatch
I might have to include this on my build
+Conner Giles worth doing for a cleaner bay!
Looks Good Asf
Beautiful results. Really learnt alot 🔥🔥. So quick question if one doesn't have a heat gun can one use a blow-dry on the heat switch?
Do you have to primer it first? And does primer effect the way it turns out
Do u think this can be used on a couch? I'm trying to replicate vinayl and this looks like the closest thing. I also am hoping once sprayed it wouldn't rub off or crack if sat on.
Daaaaaaaamn, I think now I might do black wrinkle coat on my single cam, lol.
Its easyyy
The red looks dope in your bay man!
Dig the rebelution in the background
+Kody Keresoma ayeeeee
LATOMMYLA glad you like good music bud!
It really looks nice. I would like to see how it looks after you installed it, can you share a picture 😀😀
And can you please tel what brand and grade oil do you use?
How long did you let dry before heating the valve cover?
Good job man! Do you know if it works even on the cbr1000rr engine case?
Here is a Tip, Cover your Piece with Air Craft Remover and then cover it with plastic, Let it soak in and you will get much better penetration of the Chemical.
How long is the lifespan of the wrinkle paint on the valve cover until it needs to be redone?
Fuuuuck , Hella Cleeean !! , It came out really dope man.
Thanks man!
soja in the background.....u just won a subscriber
Hi Tommy
Do you have upgraded engine mounts? I'm thinking of energy inserts. Do you perhaps know if this will give vibrations. I really don't need that like it was but solid torque mounts. went back to oem but I also miss the stiffness
Yes I do, I am running innovative motor mounts with 75A bushings, they do vibrate a bit but not too bad. If you want someone an OEM feel look into the 65A bushings
I enjoy your content man! This is the first video I have watched. I noticed your name, do you stay in LA?
+Joshua Osborn thank you!! And I do not haha
Can you paint a plastic engine cover or is that flammable?
Does anyone know how long you should wait before driving with the new paint job on said engine parts?
Help is appreciated 👍
You found that VHT Red Wrinkle paint at O’Reilly’s? I can’t find red anywhere except Amazon...
i spray enamel then when the enamel is slightly dry, i hit it heavy with clear coat and it wrinkles without using heat gun.
Nice job my man I will use that , thank you !
hey getting caught up on older videos your older stock bumper and lip diffuser setup was sick. wanted to ask if you knew of a website were I can buy mandm strut bars from went to theres I'm using tablet but it was in a different language any help would be appreciated trying to finish up chasis upgrades.
Try hitting up nemos garage, they got it!
hi, is primer not needed? or much better with primer?
I'm digging the wrinkle paint - might do this to my 96 Camry
This came our better than ChrisFix's video
Great video
How can i get very little wrinkle... i only want a light texture...
😲😲😍😍 looks grate.
Can i ask if vht wrinkle plus was petrol resistant?
You crack me up man
Beautiful car
Looks awesome, is it still lasting?
Is the heat gun required? Or can I just let it dry
" this bottle's only $10 so feel free to use as much as you want" says the guy who lives with mommy and daddy🤣🤣
Who knew it was gonna be a Honda
Can i know what color exactly is that? Thanks
im thinkinh on doing my soch like that.that is really nice man never seen it good job man when you doint track time on it want to see that bro
Should try it out, pretty easy! And when I get my Hondata, I miss the track already....
U didn’t have to sand it ? Or put primer ?
is it good on plastic surface?
you using that neuspeed bar?
Yo man. I heard some bells was that the Paletero man or the Elote guy. Damn got me wanting some now.
Use rubber plugs or cork to cover the holes
Those bubbled up spots are fish eye. They're caused by oils on the surface left over from either improper cleaning, or handling with bare hands after cleaning
Marcus Jones the paint is designed to do that, and people specifically want that result when ordering wrinkle paint
If you left it down to metal. Get someone to fill the letters in black one shot. Then get someone to do pinstriping
Not sure if it's an editing sequence thing but 4:36 best not to touch it after you've cleaned with alcohol as their is oils on your skin/hands etc.. use gloves ;)
how warm should to be the gun?
nice!
Has the paint held up?
bro if you would spray a layer of primer first the red would popout more i think but its just a suggestion bro
Sheesh that rebelution 👌🏾
Im doing this to my project bp protege valve cover
Do it! Super easy!
Dude! You have my tool chest! Only mine is red.
Im confused, if it was a type r why is it painted like a GSR?
hello don't need primer?
You deserve alot more followers
Thanks man, growing steadily