Honda NC700X - Maintenance Day: Oil Change, Air Filter, Spark Plugs & More!

Поділитися
Вставка
  • Опубліковано 22 лют 2020
  • www.etsy.com/shop/TrackHats
    Doing some maintenance and basic tune-up on my 2015 Honda NC700X was all spurred on by my failing K&N Oil Filter.
    Failing K&N Oil Filter Video:
    • K&N Oil Filters LEAK &...
  • Авто та транспорт

КОМЕНТАРІ • 22

  • @kevindarkstar
    @kevindarkstar 3 місяці тому +1

    14:06 the whole 'half of a fit/jazz engine' is BS true that the honda car engineering side had input into the engine design of the NC but that's it 👌🏻

  • @kevindarkstar
    @kevindarkstar 3 місяці тому

    8:04 might be an idea to fit some fork leg guards to protect the chrome leg 😊

  • @kevindarkstar
    @kevindarkstar 3 місяці тому

    13:02 on the rear shock the whole dog bone assembly should be stripped once a year and cleaned and greased 👍🏻

  • @SuperMegaSammy
    @SuperMegaSammy 4 роки тому +4

    I never have issues with K&n filter with 60,000 mile on my 2012 Honda NC700. i never over tight it, but sometime i see the gasket from the old filter stock in the engine so I double check for it. Good tip for fork dust cover i usually use wax to clean the tube.

    • @gripsanity
      @gripsanity  3 роки тому +1

      Thanks for the comment! Tons of people use K&N filters without issues. Even a small chance of any issue like that on a motorcycle could be catastrophic. In my opinion its not worth the risk so i use OEM now. Also i think it says a lot that racing organizations have banned them and require OEM.

  • @halilergonenc2143
    @halilergonenc2143 2 роки тому +2

    Dude you are a G. Thank you!

  • @iam_michellejenai
    @iam_michellejenai Рік тому +1

    Thanks for the video and the tips.. just picked up a 2013 and sure enough...K&N filter WAY TOO tight.

  • @sebock3294
    @sebock3294 11 місяців тому

    Your so much better of an oil changer than the last owner.

  • @cameronmcrae4719
    @cameronmcrae4719 3 роки тому

    great video!do you have a video about draining and refilling the coolant?i will attempt this maintenance job soon and i'm unsure about doing it.

  • @mdg005
    @mdg005 7 місяців тому

    I have the exact same bike and had the exact same kn oil filter I'm pretty sure the past knucklehead owner of the bike put it on with a high torque impact wrench oil filter wrench couldn't budge it at all eventually I said f it and drilled a hole through the entire filter stuck a long Screwdriver through it and was able to get it off I kept the holy kn filter as a trophy that is on display in my garage. I feel your frustration. Great video as well

  • @kirkwilliams175
    @kirkwilliams175 4 роки тому +2

    Concise. Thank you.

    • @gripsanity
      @gripsanity  4 роки тому

      You're Welcome, thanks for the comment!

  • @baraneush
    @baraneush 3 роки тому

    This drain bolt goes with magnet from manufacturer?

  • @ridingwithmarshall
    @ridingwithmarshall 2 роки тому

    What grease are you using on the forks? Mine are leaking and needing cleaning.

    • @gripsanity
      @gripsanity  2 роки тому

      If they're leaking then you'll probably need new seals. The grease is just to reduce stiction. Any grease will do.

  • @y.a.1307
    @y.a.1307 3 роки тому

    Great vid, thanks for making it. The log on your phone is a good tip 👌🏼

  • @Mathew187187
    @Mathew187187 10 місяців тому

    Could you show how you attach you saddle bags in a video

  • @ccw5254
    @ccw5254 3 роки тому +2

    카메라가 고정이다. ㅋㅋㅋㅋ 정비하는 장소를 포커스잡고 찍었으면 좋았을텐데.. 아쉽다

  • @IdealBike
    @IdealBike 2 роки тому +1

    Good job!

  • @danpizarro4866
    @danpizarro4866 4 роки тому +1

    Something is wrong with your video. I've tried to watch it. But it stops at 1:14 seconds on the dot, everytime.

    • @gripsanity
      @gripsanity  4 роки тому

      Weird wasn't working for me earlier either. Now it seems to be working. Let me know!

    • @plamenpanayotov3290
      @plamenpanayotov3290 3 роки тому

      @@gripsanity stops on 1:17