For that being your first time doing something like that I would say you did a really good job. I loved how bootleg but also how smart ratcheting the rear end up with rope and a ratchet strap. Those are some awesome problem solving skills
Respect the grind bro, I do most of my work without help and it can be frustrating at times but it’s worth it. I’m waiting on some decently warm days to drop mine, I got so many parts to put on. Here in pa the rust is awful.. makes everything worse. Truck looks great tho, nice work
I think it looks good, but with the front throwing all the weight in the front end it’ll cause some weird body roll and steering feel, if you have enough room in the c notch I would drop the back maybe another inch
How’s the upper and lower control arm 4” drop combo riding up front? I see other kits have spindle and coil 4” drop. Would you recommend one over the other?
Your pinion angle with the driveshaft never moved I’m just curious cause I had a lowered Mazda bro and let’s just say the axle twisted and brackets bent for the flip kit
Hey bro I know its a year old but how easily did the grease go in the ports and did you cut out some more space open for the upper control arm on the passenger side to make the alignment better
Hey bro question? Are you having any issues with the u bolts around the leaf springs? I watched a couple videos and see they put theirs around the rear end. I did my flip kit like yours and my differential moved facing up and now my truck vibrates
Did the ihc control arms give you any camber? Currently have two inch springs and spindles but I have bad camber eating my tires thinking of going ihc control arms
@@Henrylxtthank you for the help cause I bought my truck already lowered and I wanted to get an ideo of around how low it is cause I scrape a lot in it if I’m not careful and also is your suspension now very stiff or can you hit bumps like a regular truck?
For that being your first time doing something like that I would say you did a really good job. I loved how bootleg but also how smart ratcheting the rear end up with rope and a ratchet strap. Those are some awesome problem solving skills
Thank you man!🙏🏽 I appreciate that
That chameleon you’re referring to is a come-along 😂
Respect the grind bro, I do most of my work without help and it can be frustrating at times but it’s worth it. I’m waiting on some decently warm days to drop mine, I got so many parts to put on. Here in pa the rust is awful.. makes everything worse. Truck looks great tho, nice work
hy bro i appreciate it!🦾
I am impressed young man ... awesome ride , have been thinking about it .
Bad ass truck man
Thanks bro🤟🏽
Did you run ihc rubber spacer insulator for the 4 inch drop ?
no i never i never installed them so it’s sitting at a 5 inch rn in the front
Great job man! Looks great
appreciate it man🦾
Stock springs and shocks?
yessir
Did u put on drop spindles
no only the control arms
Fuck this im taking it to a shop
not too hard just gotta have a lot of patience 😂
Did you cut out some more space open for better alignment on the passenger side,how’s the alignment?
no i didn’t have to cut anything and the alignment is pretty good
I think it looks good, but with the front throwing all the weight in the front end it’ll cause some weird body roll and steering feel, if you have enough room in the c notch I would drop the back maybe another inch
Yeah I dropped the back 1 more inch
Awesome video brother! Congrats
Good job bro 👍🏾👍🏾👍🏾
appreciate it bro
did u have to do any cutting? or drilling to the spindle to make the control arm fit ?
no cutting or drilling was done
Loook awesome buddy
Thank you🤘🏽
Welcome
Love the vids bro 🤟🏿🤟🏿
Appreciate it bro!!
How’s the upper and lower control arm 4” drop combo riding up front? I see other kits have spindle and coil 4” drop. Would you recommend one over the other?
it’s riding great i haven’t had any problems
Hey bro I have crew cab cateye I’m ordering a 4/6 drop but I’m want to go 8 in the back what else can I add for it to be a 8 im the back
You can put 2 in drop shackles bro
Nice video also Do u have a list of all the parts shock parts and all the part #s
No sorry if you go to the website in the description below they should have the parts on the site
Came out good bro..How is the ride bro?
Appreciate it bro🤟🏽 and it rides smooth!
@@Henrylxt orale bro..I'm bout too purchase dat that kit but a 5/7 bro..thansk for the info keep up the good work an vidz comin bro..
@@ninorodriguez1547 I’m sitting at 5/7 right now I need to make a update video
@@Henrylxt niceeee im gonna wanna watch the vid
Awesome job!!....way to problem solve
Thank you!!
4/8 would be sitting nice
I might drop the back a bit more and raise the front a inch
@@Henrylxt 5/7?
I would leave the truck , you did a great job , leave the tires,,, it's just a great ride
I thought you didn’t have to c-notch frame with IHC drops because of the lower control arms?
On a 3/5 you don’t but on a 4/6 and lower you do.. maybe not so much the 4/6 unless you have bad roads then you’ll be hitting the axle a lot
Bro it’s been a while did you have any problems with the flip kit after doing burnouts . As in theirs no problem with the drive shaft ?
no bro i haven’t had a problem with anything
Your pinion angle with the driveshaft never moved I’m just curious cause I had a lowered Mazda bro and let’s just say the axle twisted and brackets bent for the flip kit
@@bubbafudge100 no bro never had a problem never had it change anything on my driveshaft
One question bro for the Sinach, how much did you measure it from the frame?
i can’t remember bro i said it on the instructions but they are long gone
do you use the stock shocks up front? i see the kit doesn’t include any for the front
No I bought some cheap ones for now but I will be installing belltech later on
where did u get the kit? tryna get a 4’6 drop for my 99 silverado
IHC suspension
How you get those sway bar link in with thread up?
i don’t remember bro it’s been a while
Awesome job, but FYI red lock tight is a little too aggressive for what ur using it on try blue locktite .
Yessirrrr 🔥🔥🔥🤩
Hey bro I know its a year old but how easily did the grease go in the ports and did you cut out some more space open for the upper control arm on the passenger side to make the alignment better
the grease went in easily and no didn’t have to cut anything
Looks dope homie
Thank bro!!
Looks good dude I just got the 4/6 drop myself plan on installing it soon just work to much
Appreciate it bro and yeah it soon me a while too bc I was doing it whenever I would get off work
@@Henrylxt Looks good bro awesome job!
Hey bro question? Are you having any issues with the u bolts around the leaf springs? I watched a couple videos and see they put theirs around the rear end. I did my flip kit like yours and my differential moved facing up and now my truck vibrates
No bro I haven’t had any issues with anything yet
Cant wait to do my 2/4 drop on my obs
Look nice , u made it look easy
It was definitely not the easiest task 😂
Does your lower control arm ball joint show under the rotor?
Yes I believe so a little
Looks sikk bro 🔥
Thanks bro!🙏🏽
Hey man could you send me the link of your drop kit please!!!
look up IHC suspension and you’ll find it
Did the ihc control arms give you any camber? Currently have two inch springs and spindles but I have bad camber eating my tires thinking of going ihc control arms
Yes I did have camper but with the alignment they fixed it
i think ihc has upper control arms for camber correction
where did you get your 4/6 drop kit?
ihc
What tire size are you running bro
275/45/20
How much was your drop kit my guy and what website you buy it from if you dont mind telling me ?
It was $1200 for the drop and I got it off ihc suspension
Appreciate it bro
What rims are those bro
they are from a gmc denali
what size tires you running?
275 45 20
How big are the shocks you got cuz my old ones feel a little short
Shocks from the rear or front?
What brand is this drop kit?
Ihc
What rim size you running on bro ?
20s bro
Do you have to get shocks when you do it?
You don’t have to but I recommend you do so it rides smooth
@@Henrylxt what kind of shocks? Do they have to be like a specific kind for a dropped trucks
What hood is that? is that a 2500HD ?
Yes it’s from a 2500 HD
@@Henrylxt how was the fitment , did you have to do some modifications to the hood
@@jesuslikesmetal when I bought the truck the hood was already on but doesn’t look like you need to do any modifications it should fit right on
what website you get the kit from?
I got it from the IHC suspension website
@@Henrylxt did it take long to come in?
@@jesusmorquecho8190 about 2-3 weeks came in fast
I like the video but I have a few questions. What do the numbers 4/6 mean? Also with that drop do you scrape a lot?
4/6 mean 4 inches lower in the front and 6 in the back also from a 5/8 and lower you’ll scrape
@@Henrylxtthank you for the help cause I bought my truck already lowered and I wanted to get an ideo of around how low it is cause I scrape a lot in it if I’m not careful and also is your suspension now very stiff or can you hit bumps like a regular truck?
@@leoherrera1239 I can hit small bumps regular but right now My truck is sitting at a 5/7 so I try to avoid any bumps but it does ride smooth
How’s the ride quality ?
It’s riding smooth
I say raise the front a inch
Fosho gonna do that
What tire size
275 45 20
😁 camelion?? its a come along, mexicans call it el camaleon but that just the pronounciation...
Learn something new everyday 💀
Link the kit you used and hardware you’d recommend to drop your truck🤌🏼
ihcsuspension.com/chevy/1999-2006/2wd-46-lowering-kit/