Always love the fact you guys aren’t afraid to get and share advice plus also admit to experience and learning time . Love seeing All Your clips and vids well done guys 👍
Loctite!!! I had same issue with the b6.3d on my first outing. Wheels popped off and also pistons in shocks !!! PSA use loctite in metal to metal, everytime
unlucky Carl, fingers crossed you get it sorted 👍 I made the same adjustments mark mentioned about shortening the wheel base which reduced the understeer massivley and gave me more control. oh and that controller 🤣 keep it up lads and loving the revamped graphics 👍
Still need to build my B6.4. Raced at Stevenage Indoor last week and had a disaster with my TT02. Steering was constantly failing. Really nice guys there though tried to help without me even asking.
The TLR looks spot on until it looses touch with the ground, any of the jumps seemed a 50/50 gamble of it landing or not....as you say a work in progress...
Understeer meant I could not get power down until car straight and eithe jump being so close to the turn I could not get on the power to make the jump consistently
I think TLR designs their race kits . Makes the car very fast and spot on. Then pulls half the parts off makes them plastic for the kit . Ads all the fast parts for upgrades
Awe shucks! On another note it’s nice to see a Tlr doing so well. All I hear about it belly aching over the buggy. Honestly stepping back and taking a good look at that situation peoples real complaint is that they want something new to be released. The ones that are doing well are still running the 3.0 and say they don’t want to upgrade yet.
I think Gavin of RCKicks sabotaged it 😮 Rotten luck, buggy was gliding around so much of that track and you had a great lap too and then… that double jump had to have a bite 😬😫 Great stuff though 👊
Loc-tite is your friend, I'm assuming it was she axle screw that backed out and not the bearing ripped out of the trail inserts. If you do the front end mod Vision Racing has titanium axles which do away with that pesky screw. Cheers!
Hard luck Carl! I love the way you understate your skills , I think your driving skills are quite incredible, it would take me an eon to reach that level, cool video
What time does south camb rc club meet and what day im getting back into rc racing was on stick controller going to try the new wheel controller with a sand viper to race with
Chears guys i have a gt12 mardave with lots of love put into it popalong to risby rc club criss from mardave helps to run the club GT 12 atom should do well there
Always love the fact you guys aren’t afraid to get and share advice plus also admit to experience and learning time . Love seeing All Your clips and vids well done guys 👍
Cheers Matthew
Loctite!!! I had same issue with the b6.3d on my first outing. Wheels popped off and also pistons in shocks !!! PSA use loctite in metal to metal, everytime
Nope not what you think
I guess i'll find out in part 2 @@PopalongRC
Oh dear, you're not having much luck with the TLR22 are you?? That B6.4 looks so planted and very quick. Great video as always!!
Cheers Barry👍👍
unlucky Carl, fingers crossed you get it sorted 👍
I made the same adjustments mark mentioned about shortening the wheel base which reduced the understeer massivley and gave me more control. oh and that controller 🤣
keep it up lads and loving the revamped graphics 👍
Cheers buddy👍👍
Still need to build my B6.4. Raced at Stevenage Indoor last week and had a disaster with my TT02. Steering was constantly failing. Really nice guys there though tried to help without me even asking.
Great guys at Stevenage, the B6.4 is a great car, you won’t be disappointed 👍
My Son had the same problem with his 5.0. Aluminum inserts will cure that.
You know what happened
Good wee video… enjoyed that 😃 looking forward to part 2
Cheers Tim, always love watching your vids too buddy👍👍
Really great video! Awesome racing!! 👍😎👍
Cheers poppy👍👍
I cannot wait to go buggy racing. Love the new fancy intro graphics
Cheers chris, thanks for the kind words👍
Great video. Love the new logo effects.
Thanks for the kind comments 👍
And it was all going so well!
😂next time🤞
Loving the new popalong graphic 😍
Thanks Andy👍
The TLR looks spot on until it looses touch with the ground, any of the jumps seemed a 50/50 gamble of it landing or not....as you say a work in progress...
Understeer meant I could not get power down until car straight and eithe jump being so close to the turn I could not get on the power to make the jump consistently
@@PopalongRC Way more to think about than the minis that i love to run pal.....
Are u guys still going with the RB10 thinking of getting one to get me back to the off road racing
It needs another outing
Much better footage with full races etc! great job def coming along nicely!
Cheers Jason👍
@@PopalongRC what class / motors are you all running in your buggies 17.5? Or 21.5?
I think TLR designs their race kits . Makes the car very fast and spot on. Then pulls half the parts off makes them plastic for the kit . Ads all the fast parts for upgrades
😂, quite possibly
Noooo. What happened to the wheel who's fault was it. I hate cliffhangers 😅
It might be the builder!!😂
Best rc channel going at the minute lads👍👍 keep up the good work, just what us racers want to watch.
Nice one Johnboy👍
Awe shucks!
On another note it’s nice to see a Tlr doing so well. All I hear about it belly aching over the buggy. Honestly stepping back and taking a good look at that situation peoples real complaint is that they want something new to be released. The ones that are doing well are still running the 3.0 and say they don’t want to upgrade yet.
I reckon it’ll be a great car when we’ve got it dialled👍
I think Gavin of RCKicks sabotaged it 😮
Rotten luck, buggy was gliding around so much of that track and you had a great lap too and then… that double jump had to have a bite 😬😫
Great stuff though 👊
Should have it dialled soon 🤞
Loc-tite is your friend, I'm assuming it was she axle screw that backed out and not the bearing ripped out of the trail inserts. If you do the front end mod Vision Racing has titanium axles which do away with that pesky screw. Cheers!
Pretty sure it was locktighted, maybe I missed this screw 😂
It's a very technical course.
but it looks like a lot of fun😁
You are right, awesome fun👍
Oh dear.....
Car doesn't seem to be very settled. I don't know if that is set up or just the chassis itself.
Hopefully set up
Great content again... Real shame there for Carl 😢
Loving the new opening and closing popalong image 💪🏻
Hopefully will have the car dialled soon👍 thanks for watching
Time for some titanium front axles by the looks of it......🤔
No
they should have a case pad on the landing for the double, that's harsh if you get it wrong, or in Carl's case, when
Hahahaha
Nice to see you straight to the driver excusses, thats what i allways do 1st 👍😂
Absolutely 😂
Hard luck Carl! I love the way you understate your skills , I think your driving skills are quite incredible, it would take me an eon to reach that level, cool video
Thanks very much for the kind comments, still some work to do on this car👍
lower hubhight in front gives more turn in to the corner.
I share your pain. 😢
Thanks Ian
So for the ae car are you thinking about getting the 4 gear idk if it comes with a 4 gear
What time does south camb rc club meet and what day im getting back into rc racing was on stick controller going to try the new wheel controller with a sand viper to race with
Please get back to me about time and day at south camb rc club
Check them out on Facebook
On road - Monday
Off road - Friday
Having break until September due to holiday season
Chears guys i have a gt12 mardave with lots of love put into it popalong to risby rc club criss from mardave helps to run the club GT 12 atom should do well there
I see Losi buggies are still fragile
Not the best start
Try the comet on a 2s lipo
was looking real good but then ......
Welcome to tlr team loser racing !