I’ve watched dozens of tutorials for auto repair with decent success, but I found your video to be one of the best and most comprehensive and well thought out videos I’ve watched. Thanks for your info and help. Liked and subscribed!
Thank you for a terrific video. Everything went as you exhibited, except the locking tabs on the electrical sockets on each sensor did NOT want to release. That was the toughest part of the job. Due to the age, of the plastic tabs, they simply broke. I re-installed them and locked them down with electrical tape. Done!
Most of us have had enough beer drinking, animal comments, rumbling about things that have NOTHING to do with getting your vehicle back on the road, one hand working one hand filming, dark garage video, & the worse, the videos with the LOUD LOUD music... So your videos Sir are greatly appreciated, keep up the good work, three thumbs up....
3 yr old video fresh subscriber. Excelent video and thank u for pointing put all screws and moat importantly the tidbit at the end about configuring the iac. I just bought it and they told me remember to put ur key in the on position a frw times before cranking it so it configures. Thank u from mexico🇲🇽
I'm having problems with my 2001 Jeep Grand Cherokee Laredo diagnose same thing is happening to my Jeep fixing to fix it now that it's raining here in Houston great video and diagnose everything from one point to the other
I believe I broke the plastic off the end of the throttle cable. I super glued it and hoping it'll work. Out of the 3 lines that you took off, it was the one closest to the camera
Just did it to mine, the tps was stuck in the plastic where it plugs into, I was able to get it out and scuffed up the 18 year old plastic, I put in my new one and used electrical tape to hold it in secure, helped with my transmission shifting too.
Great video 🤟🏼 Maybe my obsession compulsive disorder but doing all that work I would of cleaned the Throttle Body out while replacing them sensors.. I have tried two different PCM refurbished from Rockauto first one would stall when you put a little pressure on the wire harness so I had to buy another one for 350 and wait until it got here and still waiting for the refund for the first one. But then it started acting up again and crank no start until I put pressure on the pcm wire harness.. so I got some heavy duty 24 inch zip ties and tightened the clips to stay in place. I believe all my clip tabs are broken so maybe that is what is wrong with it.. while at it I use to notice a high idle then dropped idle. It went away but still real low idle enough to where I question will it stall out. So I just purchased the Iac, TPS, Map sensors and a throttle body gasket and a can of throttle body cleaner. It should arrive 12/3/24 and I’ll be doing this same concept. I did clean the top part of the Throttle Body and the IAC.. I hope this fixes my low idle. I know since it is cable pull Throttle body it will still half ass work with sensors being bad. I would also have a hesitant acceleration at times when I first try to take off and accelerate but after a few minutes that goes away.. this jeep was going to be easy to fix when things broke is what I thought at first… but when this all occurred I replaced the ignition coil,camshaft sensor, rotor, Distributor cap, Spark plugs and wires, fuel injectors, new battery and terminals, Crankshaft sensor, starter, fuel pump, and turned out my PCM was going out.. so I bought one and it was defective and bought another one…. 97 Jeep Grand Cherokee Laredo 4.0 6L 4x4.. are not cheap to maintain.
Good video my brother, im tryna get my mobile mechanic business started. Im happy to see another brother like myself. Keep the vids coming, also are you in the DMV?? Im originally from the area and you just sound like it. Keep grinding brotha
BARRICADE GARAGE ok kool. Ill be sure to stay tuned. Oh i saw you had the newer milwaukee ratchet in another video. I just got one myself, they make some pretty good stuff. Im tryna save up for their new high torque impact
+Guty Perez its possible your A.C Compressor is locking up, causing your engine not to turn. Either the compressor is shot, or you have a bad IAC or other air/fuel problem, and the extra load is enough to kill the engine.
Thanks for the video, it’s self explanatory. Quick question; Is the Intake air temperature sensor and the Map sensor near by? I’m trying to figure out where they’re located. I have a 2000 Jeep Grand Cherokee Laredo 4.0 L
I replaced the crankcase breather system, placing an air filter at the inlet and outlet, removing the pcv valve and oil vapor is coming out of the air inlet filter. I ask if something is wrong. ZJ 5.9.
My 04 Jeep 6 cyl 4.0 has started to idle around 1,500 to 2,000 rpm on start up. This is ridiculous. What could be the cause? And, my oil pressure gauge fluctuates when I come to a stop. Could it be dirty oil and filter? Help?
I have a question for you sir,,,my 1998 Grand Cherokee ...have a irregular idling needle...and the engine sound..its like as if step on a gas pedal whichs i did not...and the odometer lights is blinking when the engine is onn....
I have a rough start takes 2 or three cranks If I hold the first it just turns over never starts have to turn key all the way back and forward again sometimes 3-4 times.. changed fuel pump entire assembly and fuel filter (because it seemed the return valve went bad) i changed with aftermarket, mechanic said to get a MOPAR I did get brand new MOPAR and it started right up for a day and then issue returned... , changed temp sensor ( because w/ sensor unplugged it seems to start first try), issue persists after changing temp sensor, Sprayed some cleaner in the throttle body and also sprayed electrical cleaner in the temp sensor connector plug, car started right up a few times in a row, changed spark plugs, car started right up few times.. then starting issue returned?? could it be the TPS or IAC? once running the car runs and idles great.. it does seem to accelerate on it's own sometimes up to like 25 MPH (random and not consistent), and also seems to hold speed some when letting off the accelerator also random not all the time
Great vid! I'm about to buy a 2004 grand cherokee 4.0. The owner says it stalls at lights, unless he shifts into neutral. Do you think this is realted to the TPS, IAC, throttle body, or any of the these? I'm thinking I might buy all 3 and it's easy enough to do a parking lot replacement.
Sometimes I stall when pressing the gas after a stop, and now also when the AC is on and I am stopped with my foot on the brake. I hope these or one of these is my problem.
Same issue at first then it went down and now idles at 1000, and won't decelerate unless I brake. I ordered the standard iac, but the needle seems to be a bit thicker than the oem one. Idk if there has anything to do with it. Let me know if you found a solution! Mines a 2001 cherokee sport i6
I replaced the crankcase breather system, placing an air filter at the inlet and outlet, removing the pcv valve and oil vapor is coming out of the air inlet filter. I ask ZJ 5.9.
Mine now stalls and now engine light is on and a P1296 code. Was running better before cleaning IAC and throttle body and new spark plugs and new elbow vacuum boot. So running idle no ac, now ac on it stalled! If I let off gas it stalls.
Speechless, my jeep idles funny after 20mins and under load she'll wanna stall/hesitate, turn her off and go to restart she wants to stall out. Then again my girl has 97k
what is that sencor by the trottle body called? I replaced the throttle position sencor about 6 months ago. bought it from Autozone.. could that have gone bad all ready? my 99 jeep grand cherokee limited starting running bad and kinda bucking when it goes in over drive. while driving at a cruising speed. this all started after replacing the transmission filter. I don;t understand why replacing the filter caused the motor to mess up
I have a 4.0 jeep cherokee I have a car malfunction It is to turn off the car only if it is parked and in traffic jams But on the main streets the engine does not stop
@@barricadegarage5361 then I replaced the TPS and now the car would not start. This time, I have to step on the gas lightly and then start the car and hold the gas pedal for 3 minutes or else the engine dies. Please help.
Very dangerous to pull screws out over the intake hole! You should disconnect the the sensors first and the remove the screws away from the engine!👍 I see you put a towel in the intake manifold further into the video!👍✌
Thanks for the step by step. Made the changes to my 04 WJ and she’s purring… 🥃🥃🥃
Great demonstration man. You didn't miss a beat plus this was straight to the point without a massive backstory for you and your car. Thanks so much.
Great detailed video, the music was low key which was absolutely NO distraction, camera shots & angles were excellent, keep up the good work....
Great video, direct and clear, showing all of the steps, and the reasons why you did some stuff.
I’ve watched dozens of tutorials for auto repair with decent success, but I found your video to be one of the best and most comprehensive and well thought out videos I’ve watched.
Thanks for your info and help.
Liked and subscribed!
Thank you for a terrific video. Everything went as you exhibited, except the locking tabs on the electrical sockets on each sensor did NOT want to release. That was the toughest part of the job. Due to the age, of the plastic tabs, they simply broke. I re-installed them and locked them down with electrical tape. Done!
Thank you, sir for the video. You just explained my surging and rough idle of my 4.0L and a clear way to fix it!
Great job man! Step by step direct steps one after another. I hate long videos explaining unnecessary things. Keep up the great work.
From Lebanon is just wanna say. Thank you brother you just saved my life.
Excellent video. From diagnosis to repair, very well done. Easy to understand.
I've been looking for this. Thank you.
I'm about to go replace my TPS and I've done it before, but you're video and how you explain the purpose behind everything was awesome.
Most of us have had enough beer drinking, animal comments, rumbling about things that have NOTHING to do with getting your vehicle back on the road, one hand working one hand filming, dark garage video, & the worse, the videos with the LOUD LOUD music...
So your videos Sir are greatly appreciated, keep up the good work, three thumbs up....
Excellent videos, as a mechanic myself I find your videos very precise, clear and direct. You do an amazing job keep up the great work 👍🏻
Very well explained, thanks. Cheers from Jacksonville Florida 🌞
Perfect how to video. No bs and clear instructions. 👌
This was a great video! I had to rewatch a couple times but I got it! Thanks!
Very good stuff thank You...good close ups of what needs to be done.
Thanks
Thanks for the way in which you presented that. One of the best videos I have seen for repairs
This video literally helped me so much. Very clear and easy to understand, I changed mine on my 2004
Thank you bro, my vehicle is my income and it shut off on me today. 100% certain it’s those damn sensors. Thanks man this helped out a ton!
Thanks for taking the time to make this video, i checked my tps and it was cracked, I ordered the iac valve.
Awesome video! doing a real community service with direct concise step by step video like this 👌
Thanks brotha, very helpful and great production.
Excellent video!! Exactly what I was looking for and very informative across the board! Definitely subscribing in case I need anything else
Thanks man ! Just got done rebuilding my entire engine and could not figure out why it was idling Goofy.
3 yr old video fresh subscriber. Excelent video and thank u for pointing put all screws and moat importantly the tidbit at the end about configuring the iac. I just bought it and they told me remember to put ur key in the on position a frw times before cranking it so it configures. Thank u from mexico🇲🇽
Agradecido 🙏🏽🙏🏽🙏🏽 Acabo de cambiarlo y me resultó excelente… Bendiciones ❤️🔥❤️🔥❤️🔥
You give an idiot proof commentary! Every single procedure was described perfectly!!! 5 stars my friend!!!!
Bro, thank you I’m learning how to fix cars and I have this jeep and this is super helpful
I'm having problems with my 2001 Jeep Grand Cherokee Laredo diagnose same thing is happening to my Jeep fixing to fix it now that it's raining here in Houston great video and diagnose everything from one point to the other
Great video. Clear and concise.
This video was vet helpful now my Jeep is fixed and running
Thanks man, it sure does help when someone else is working on the same car.
Great video, well explained, thanks for sharing. Im late to the party but this was very informative for my late 01 model grand cherokee.
👍🤘👍
Simple and very good explained....no like others one...( too much bla, bla, bla)....I Like it!!! Thank you man.
I believe I broke the plastic off the end of the throttle cable. I super glued it and hoping it'll work. Out of the 3 lines that you took off, it was the one closest to the camera
Excellent video...great detail.
Amazing job, much appreciated!
Just did it to mine, the tps was stuck in the plastic where it plugs into, I was able to get it out and scuffed up the 18 year old plastic, I put in my new one and used electrical tape to hold it in secure, helped with my transmission shifting too.
Great video 🤟🏼 Maybe my obsession compulsive disorder but doing all that work I would of cleaned the Throttle Body out while replacing them sensors.. I have tried two different PCM refurbished from Rockauto first one would stall when you put a little pressure on the wire harness so I had to buy another one for 350 and wait until it got here and still waiting for the refund for the first one. But then it started acting up again and crank no start until I put pressure on the pcm wire harness.. so I got some heavy duty 24 inch zip ties and tightened the clips to stay in place. I believe all my clip tabs are broken so maybe that is what is wrong with it.. while at it I use to notice a high idle then dropped idle. It went away but still real low idle enough to where I question will it stall out. So I just purchased the Iac, TPS, Map sensors and a throttle body gasket and a can of throttle body cleaner. It should arrive 12/3/24 and I’ll be doing this same concept. I did clean the top part of the Throttle Body and the IAC.. I hope this fixes my low idle. I know since it is cable pull Throttle body it will still half ass work with sensors being bad. I would also have a hesitant acceleration at times when I first try to take off and accelerate but after a few minutes that goes away.. this jeep was going to be easy to fix when things broke is what I thought at first… but when this all occurred I replaced the ignition coil,camshaft sensor, rotor, Distributor cap, Spark plugs and wires, fuel injectors, new battery and terminals, Crankshaft sensor, starter, fuel pump, and turned out my PCM was going out.. so I bought one and it was defective and bought another one…. 97 Jeep Grand Cherokee Laredo 4.0 6L 4x4.. are not cheap to maintain.
You made a great video here. Thank you.
Good video my brother, im tryna get my mobile mechanic business started. Im happy to see another brother like myself. Keep the vids coming, also are you in the DMV?? Im originally from the area and you just sound like it. Keep grinding brotha
+george simms i apreciate it. Im in northern VA Alexandria area
BARRICADE GARAGE ok kool. Ill be sure to stay tuned. Oh i saw you had the newer milwaukee ratchet in another video. I just got one myself, they make some pretty good stuff. Im tryna save up for their new high torque impact
george simms my jeep die when I used the ac I replaced hall the electric sensors map tps he at sensors maybe the transmission ?
+Guty Perez its possible your A.C Compressor is locking up, causing your engine not to turn.
Either the compressor is shot, or you have a bad IAC or other air/fuel problem, and the extra load is enough to kill the engine.
george simms thanks Sr I looking to chance the compressor thanks
Great video my dude. Thank you. 🤘😎🤘
Very good job!
michael mixon thanks
Thanks for the informative video, I have an TPS on the way for my '99 Jeep XJ 4.0. Check engine light show codes P0121 & P0123 how this repairs it.
Outstanding!
Solid information.
very respected video. thank you!
Bro you need to explain everything!! Dope video
Good stuff thank you.
Thanks for the video, it’s self explanatory. Quick question; Is the Intake air temperature sensor and the
Map sensor near by? I’m trying to figure out where they’re located. I have a 2000 Jeep Grand Cherokee Laredo 4.0 L
Great video brother!
dawg know his ish... I did exactly what he said step for step and I'm back WIGGLIN!!
Would this be the reason why I have to hold my feet on the gas and to start it and keep it running
I replaced the crankcase breather system, placing an air filter at the inlet and outlet, removing the pcv valve and oil vapor is coming out of the air inlet filter. I ask if something is wrong. ZJ 5.9.
hello Barricade Garage do you have part numbers for the replacement parts TPS and IAC?
Great video, thank you.
My 04 Jeep 6 cyl 4.0 has started to idle around 1,500 to 2,000 rpm on start up. This is ridiculous. What could be the cause? And, my oil pressure gauge fluctuates when I come to a stop. Could it be dirty oil and filter? Help?
I love your videos
Thank you.
What’s the other sensor attached to the throttle body?
I have a question for you sir,,,my 1998 Grand Cherokee ...have a irregular idling needle...and the engine sound..its like as if step on a gas pedal whichs i did not...and the odometer lights is blinking when the engine is onn....
If I only need the throttle position sensor replaced, should I also change the idle air control valve as well? Or is it okay to change just the one?
Its ok to just change one
BARRICADE GARAGE thank you so much!
Yes
I just found that out idle surge
It is ok but since you right there, it's a good idea to change both so at least you know they both get new life at the same time and peace of mind.
I have a rough start takes 2 or three cranks If I hold the first it just turns over never starts have to turn key all the way back and forward again sometimes 3-4 times.. changed fuel pump entire assembly and fuel filter (because it seemed the return valve went bad) i changed with aftermarket, mechanic said to get a MOPAR I did get brand new MOPAR and it started right up for a day and then issue returned... , changed temp sensor ( because w/ sensor unplugged it seems to start first try), issue persists after changing temp sensor, Sprayed some cleaner in the throttle body and also sprayed electrical cleaner in the temp sensor connector plug, car started right up a few times in a row, changed spark plugs, car started right up few times.. then starting issue returned?? could it be the TPS or IAC? once running the car runs and idles great.. it does seem to accelerate on it's own sometimes up to like 25 MPH (random and not consistent), and also seems to hold speed some when letting off the accelerator also random not all the time
once running the car runs completely normal, no issues
once running the car runs great
What's the name of that gasket that's on top of the throttle body ive been trying to find one.
Great vid! I'm about to buy a 2004 grand cherokee 4.0. The owner says it stalls at lights, unless he shifts into neutral.
Do you think this is realted to the TPS, IAC, throttle body, or any of the these? I'm thinking I might buy all 3 and it's easy enough to do a parking lot replacement.
Thanks!
Is code po123 the IAC valve?
2002 jgc 4.0
Sometimes I stall when pressing the gas after a stop, and now also when the AC is on and I am stopped with my foot on the brake. I hope these or one of these is my problem.
Thank you brother!
Did you get a scanner code that told you the IAC valve needed replacing? That is what I need to know.
thanks for the video
Change the IAC and idle went to 2000rpm. Changed the TBS and MAP still stuck at 2000rpm. No Leaks or hose broke, any recommendations?
Same issue at first then it went down and now idles at 1000, and won't decelerate unless I brake. I ordered the standard iac, but the needle seems to be a bit thicker than the oem one. Idk if there has anything to do with it. Let me know if you found a solution! Mines a 2001 cherokee sport i6
Great video!
Very Good.
Vic Matthias thanks!
Relearn takes forever
The idle valve can be removed without removing the throttle body,but the lower skrew may be easily lost..
I replaced the crankcase breather system, placing an air filter at the inlet and outlet, removing the pcv valve and oil vapor is coming out of the air inlet filter. I ask ZJ 5.9.
Mine now stalls and now engine light is on and a P1296 code. Was running better before cleaning IAC and throttle body and new spark plugs and new elbow vacuum boot.
So running idle no ac, now ac on it stalled! If I let off gas it stalls.
Are you a commercial mechanic, if so, where is your shop?
Speechless, my jeep idles funny after 20mins and under load she'll wanna stall/hesitate, turn her off and go to restart she wants to stall out. Then again my girl has 97k
Mi e has 215k miles on it. Runs like a chamo though to
Could the tps cause my transmission to be stuck in first
Yes
BARRICADE GARAGE thanks man your video was premium quality as well.
Imma need do that to my jeep check engine just came on good thing I work at Auto Zone and get the parts cheaper lol
what is that sencor by the trottle body called? I replaced the throttle position sencor about 6 months ago. bought it from Autozone.. could that have gone bad all ready? my 99 jeep grand cherokee limited starting running bad and kinda bucking when it goes in over drive. while driving at a cruising speed. this all started after replacing the transmission filter. I don;t understand why replacing the filter caused the motor to mess up
carol bellinger the 2 sensors replaced in this video were the Idle Air Control Valve & Throttle Position Sensor
The 3rd sensor on the throttle body is the MAP sensor.
I have a 4.0 jeep cherokee I have a car malfunction It is to turn off the car only if it is parked and in traffic jams But on the main streets the engine does not stop
I replaced my IAC and cleaned the throttle body. After starting the engine, the RPM (3,000) is high. Is this normal?
No it might be defective if its still doing it
@@barricadegarage5361 then I replaced the TPS and now the car would not start. This time, I have to step on the gas lightly and then start the car and hold the gas pedal for 3 minutes or else the engine dies. Please help.
@@rbyee7571 Did you clean the throttle body ??
@@barricadegarage5361 yes, I did. I used the throttle body cleaner.
What’s the part # for the idle control valve
I dont remember the one I got
Excellent video! you are the very best
I change both & it gave me low idle Nd shuts off
Very dangerous to pull screws out over the intake hole! You should disconnect the the sensors first and the remove the screws away from the engine!👍
I see you put a towel in the intake manifold further into the video!👍✌
Skip all parts where he is using power tools to remove all the bolts and screws!
4
a JOKE
Great vid. Thank you.