Have a 2012 RS and my battery was also dead one morning. It was original so I just went ahead and purchased a new one. Had the exact same problem afterwards although mine was intermittent. Anyhow all fixed now thanks to this vid!!
Oh wow! Well keep an eye on your brake lights staying on. The camaros have a common issue where the brake switch goes bad and the lights stay on when the car is parked or while driving
Dude you did an AMAZING JOB with that video. I have a ‘15 as well. My sons ‘14 is the one giving us trouble. His knob still works but not properly. Could this still be the problem? He has to turn the fan speed really slow for it to grab if that makes since. If he turns it too fast it doesn’t work. Also only has cool air out passenger side/ warn air on drivers so I hope it just low on refrigerant and it’s not the famous blend door issue.
Thank you so much! And You may unfortunately have a blend door issue because that is what directs the air from heater and AC and as for the knob it can be one of 2 things. It can be that the contacts behind the knob are worn out causing them to not make a good connection sometimes or it can be the blower motor resistors.
Hello And thanks for all your videos In my case is that every button works, but when I try to select fan speed below 2 it goes crazy to 11/12 . So it never shuts down . Do you think is the same module problem?
Same exact thing happened so I ordered the part from the link… the one I got is for dual climate? Mine isn’t? Happen to have the part number for the non dual climate
Good video and thanks!! I have a question,i have a 13 camaro and my air runs all the time with no control but here is the other thing the door dinger the turn signal dinger and the radio are also not working. Could this module be causing all this?
@@EddiesCustomsandRestorations Its not affecting the lights just the sound it makes in the car? You know like the key on or door open sound those don't work either??
I got a 2014 Camaro SS. I have issues similar. Heated seats do not work. AC blows hot sometimes or cold. Sometimes hotter temperatures. No AC. They told me it was the door inside the dash. I'll give it a shot. Thank you
My buttons and everything work. My heat blows HOT and my ac blows warm. I recharged it, that wasn’t the problem. Idk if it’s the blend door since the heat still works? Do u have any idea what it could be?
There is a high chance its the blend door if everything else works. The blend door breaks. There are several videos on youtube on a few ways of replacing it.
Would this be the same fix if the heater is blowing hot air only on the driver's side, and when I have the AC on, it only blows cold air on the passenger side? Thanks
Good video man, I think I got the same problem, but I clicked the link in the description and the module is not available 😮💨 I have a 2014 rs do you know where can i find it? Hope you can help me bro
@eddie's My 2014 Camaro is having two problems at once: 1) A/C blows warmish air and heater blows warmish air even at full both ways 2) the stock radio randomly turns off and on on its own, and even sometimes when windows or doors are used. Could it be the blend door? And is the radio shot or could it be the BCM? Thanks in advance!
These radios have issues at times, disconnect negative battery cable for 10 seconds then reconnect see if that resets everything and then comment back with your findings please.
I had the exact same problem with my 2013 Camaro but my radio screen went blank as well…so would I need a different part for my radio screen to start back showing?
@@pimpcess33 the process should be the same if they haven't changed the location of the module which I don't see why they would. I haven't gotten a 2017 in here but I can do some research later to see if the location is the same for the module
Okay thank you I can’t seem to find much information on the HVAC control module for a 2017 this video is the closest thing I’ve found related to it and a shop is trying to charge way to much for a job I know I can complete myself with another helping hand.
@@pimpcess33 I wonder how much they want to charge lol And based on what im seeing online, the part looks to be the same dimensions and same appearance just different part numbers here and there. So I would recommend checking in the same location, maybe take a peak with like a mirror to see if you can see it before starting to pull the plastics off.if it's not there, another location im seeing on other cars like the chevy Cruze is behind the actual AC controls like behind that right under the radio. But I would check in the same location as this one first. Please let me know if it is there that way I can update the years on this video and help other people :)
Hello i have a 2011 camaro and I ran into a problem like this but my fan works fine my heater works as well all my relays are good and im getting fire to my compressor as well but my a/c is not kicking on and my heated seats are working but not my air what do you think about this
Check to see if you didn't loose all your freon. High side service port sometimes develops a leak and if your freon level drops to a certain level, the ac will protect itself and the pressure switch will not turn on the compressor
@@montegohills1546 so it's leaking the freon out then? If so that is why you are not getting any cool air. Go to your local auto parts store and show them where its leaking from and they will sell you the part. Should come out to under $20 for the part. Since you have that leak, the ac system picks up that you dont have adequate pressure to run the ac compressor so it doesn't even try to turn it on.
Let me look up another one for you but what year is your car exactly? I updated all the links on my description. i hope this helps you. Sorry for the delay in response
@@jstrickland8875 hey, yes i did my best to list as many as I could on the description. Could you please check the list? It should be listed on there. Best of luck.
That is more related to your blend door. it may be stuck on the heater setting. Check other videos on youtube in reference to the blend doors for your camaro. Hope this helps you out.
Mine is just blowing hot air for heat but very low. My mechanic said the little button damage. I’m wondering if I need to order the whole radio or just the module. Any suggestions?
@@EddiesCustomsandRestorations it takes about 45 mins-1hr for the air to get warm not even hot. And when you turn on the car, it goes straight to AC even if it was on heat before. The ac button on even when it’s on heat, i have to press the button to turn off the ac. I live in NJ, I just don’t drive sometimes.
@@trevoramaru6106 okay so what i would like for you to check now is visually inspect your water pump. Crazy I know, doesn't seem related but the thing is is that your heater needs a few things to work and 1 of those things is proper flow through the heater core. Open your hood, and see if you see an orange line of dried out antifreeze that got slung around by the belt. The orange line would be on the underside of your hood, and on some areas there by your belt. If you see this then your water pump is leaking out the weep hole or somewhere there and needs to be replaced. This would affect your heater performance. Another thing to try is, make sure your vehicle is warmed up, put the car in park, set the heater on low to where you can feel it with your hand only, and then rev up your car a little bit to like 3000 rpm (3) and hols it there for a little while. If you feel that the air at the vents gets warmer, this is an indication that you have either low coolant or the pump is simply not pushing the coolant through enough and should replace the pump. Hope this information is useful
Hey, my 2014 Camaro only blows warm air. I tried replacing the compressor and the ambient air temp sensor but nothing is working. Any ideas? It also displays the wrong temp, I have no idea.
I don't have heated or cooled seats but the fan speed control is changing the temperature of driver side and ac heat control Changes passenger side what would cause that
Its very possible that it would be the module since that is the one controlling all of those control that you select and when it internally fails, it can behave that way
I have the same problem except the functions light up when I switch it. My problem is that when I turn the level of the fan up or down the car doesn't blow any air at all
You may want to check your blower motor. Its the round motor and see if you can give it power and ground and if it doesnt spin then its your blower motor and not the controls nor resistor
@@trellbailey4700 that will be your blend door actuator. Do a search on that for these camaros and there should be a video out there. I am sorry I currently don't have one out.
Generally if its just the "cool" setting thats not working, you may be facing a different problem like a bad Ac clutch relay, bad AC pressure switch or bad compressor itself.
@@southsidemusic i see. Well in this case since you dont have both then your blend door might be borken or stuck the one that selects the temperature setting. So take a lot at this video here im sending you a link of so you can check that. ua-cam.com/video/wTatquprmJ4/v-deo.html
Hmm a blend door could be stuck or broken. Check out other videos on youtube in relation to camaro blend door problem. It may be what youre looking for. Hope this helps.
Okay I changed the AC control module and now the AC is blowing out hot air and the AC will not turn off on my 2013 Chevy Camaro SS…I don’t know what else to do
Try disconnecting the battery and leaving it disconnected for a minute or so and then reconnect. This will allow all modules to do a nice reset and should go back to normal ofcourse if everything is in good working order. If it doesn't solve the problem, there may be a stuck blend door issue which is common on camaros. Here is my video that takes you through the steps for the battery disconnect. ua-cam.com/video/xQChJuowPbE/v-deo.html
How does your old one work?? Have you attempted to do a reset on everything completely by disconnecting the battery at the trunk and giving it a minute or two disconnected so it can all refresh?
@@EddiesCustomsandRestorationswell I think I discovered the problem I ordered 2 brand new ones and I think they were meant for touch screen controls which I don’t have so I got on eBay and ordered an original 2012 piece and replaced my old one now my car blows ice cold air and it drives smoother my old one made my car jerk a lot but this new one I have makes my car drive smooth as butter apprecuate the tip brother💪🏾😎
@@TheRealPoPorter oh sure am glad it helped! And sorry it didn't work out the first time. I bet the frustration was terrible! Well glad it worked out, stay cool 😎
Have a 2012 RS and my battery was also dead one morning. It was original so I just went ahead and purchased a new one. Had the exact same problem afterwards although mine was intermittent. Anyhow all fixed now thanks to this vid!!
Oh wow! Well keep an eye on your brake lights staying on. The camaros have a common issue where the brake switch goes bad and the lights stay on when the car is parked or while driving
My car doesn't blow any air but I can slightly feel heat or coolness would it be the control module or no
You saved me $1000 thank you
You're very welcome 🙏
Dude you did an AMAZING JOB with that video. I have a ‘15 as well. My sons ‘14 is the one giving us trouble. His knob still works but not properly. Could this still be the problem? He has to turn the fan speed really slow for it to grab if that makes since. If he turns it too fast it doesn’t work. Also only has cool air out passenger side/ warn air on drivers so I hope it just low on refrigerant and it’s not the famous blend door issue.
Thank you so much! And You may unfortunately have a blend door issue because that is what directs the air from heater and AC and as for the knob it can be one of 2 things. It can be that the contacts behind the knob are worn out causing them to not make a good connection sometimes or it can be the blower motor resistors.
Hello And thanks for all your videos
In my case is that every button works, but when I try to select fan speed below 2 it goes crazy to 11/12 .
So it never shuts down .
Do you think is the same module problem?
Youre welcome 🙏 and actually that sounds more like a blower resistor problem. Its the one that controls your speeds.
@@EddiesCustomsandRestorations thanks for the response
Do you have an idea which part is that?
Same exact thing happened so I ordered the part from the link… the one I got is for dual climate? Mine isn’t? Happen to have the part number for the non dual climate
Oh no...im sorry this happened...there should be a part number on the part itself. Type that into Amazon and it should pop up that way
Good video and thanks!! I have a question,i have a 13 camaro and my air runs all the time with no control but here is the other thing the door dinger the turn signal dinger and the radio are also not working. Could this module be causing all this?
That sounds more like the Body control module since your exterior lights are also being affected.
@@EddiesCustomsandRestorations
Its not affecting the lights just the sound it makes in the car? You know like the key on or door open sound those don't work either??
I’m having the same problem!
I got a 2014 Camaro SS. I have issues similar. Heated seats do not work. AC blows hot sometimes or cold. Sometimes hotter temperatures. No AC. They told me it was the door inside the dash. I'll give it a shot. Thank you
The door behind the dash would not affect your heated seats though so the blend door would NOT be the problem for sure related to the heated seats
Did you ever find out the problem
I’m having the same problem with my 2014 Camaro
My buttons and everything work. My heat blows HOT and my ac blows warm. I recharged it, that wasn’t the problem. Idk if it’s the blend door since the heat still works? Do u have any idea what it could be?
There is a high chance its the blend door if everything else works. The blend door breaks. There are several videos on youtube on a few ways of replacing it.
Would this be the same fix if the heater is blowing hot air only on the driver's side, and when I have the AC on, it only blows cold air on the passenger side? Thanks
@@roseangel4427 that would be more of a blend door actuator issue
Good video man, I think I got the same problem, but I clicked the link in the description and the module is not available 😮💨 I have a 2014 rs do you know where can i find it? Hope you can help me bro
Give me an hour or so so I can update the link. Im currently working.
I updated the link. Thank you for your patience 🙏...
Hello
I have the exact same problem as you had. Did you have to get the new part programmed or did you just install it?
Hello, and all i did was installed it as shown there on the video. No programming was needed.
Thank you
@@andyd4105 youre very welcome 🙏
@eddie's My 2014 Camaro is having two problems at once: 1) A/C blows warmish air and heater blows warmish air even at full both ways 2) the stock radio randomly turns off and on on its own, and even sometimes when windows or doors are used. Could it be the blend door? And is the radio shot or could it be the BCM? Thanks in advance!
These radios have issues at times, disconnect negative battery cable for 10 seconds then reconnect see if that resets everything and then comment back with your findings please.
@@EddiesCustomsandRestorations Ok thanks I'll try that! As for the A/C and heat issue what do you think?
The AC does seem to sound like a dead or stuck blend door or blend door actuator.@@pmxevious
@@EddiesCustomsandRestorations Ok thanks I'll order the door and check out the videos on how to get in there to replace it
I had the exact same problem with my 2013 Camaro but my radio screen went blank as well…so would I need a different part for my radio screen to start back showing?
I have another video on the my link black screen. Try this first before buying anything. Here is the link ua-cam.com/video/xQChJuowPbE/v-deo.html
Hey dude awesome video!, did you have to reprogram anything?
Thank you!! And no reprogramming needed actually.
Would this also work for a 2017? Like the same process?
@@pimpcess33 the process should be the same if they haven't changed the location of the module which I don't see why they would. I haven't gotten a 2017 in here but I can do some research later to see if the location is the same for the module
Okay thank you I can’t seem to find much information on the HVAC control module for a 2017 this video is the closest thing I’ve found related to it and a shop is trying to charge way to much for a job I know I can complete myself with another helping hand.
@@pimpcess33 I wonder how much they want to charge lol
And based on what im seeing online, the part looks to be the same dimensions and same appearance just different part numbers here and there. So I would recommend checking in the same location, maybe take a peak with like a mirror to see if you can see it before starting to pull the plastics off.if it's not there, another location im seeing on other cars like the chevy Cruze is behind the actual AC controls like behind that right under the radio. But I would check in the same location as this one first. Please let me know if it is there that way I can update the years on this video and help other people :)
Hello i have a 2011 camaro and I ran into a problem like this but my fan works fine my heater works as well all my relays are good and im getting fire to my compressor as well but my a/c is not kicking on and my heated seats are working but not my air what do you think about this
Check to see if you didn't loose all your freon. High side service port sometimes develops a leak and if your freon level drops to a certain level, the ac will protect itself and the pressure switch will not turn on the compressor
It's nothing but air coming out of the line where I put freon in
@@montegohills1546 so it's leaking the freon out then? If so that is why you are not getting any cool air. Go to your local auto parts store and show them where its leaking from and they will sell you the part. Should come out to under $20 for the part. Since you have that leak, the ac system picks up that you dont have adequate pressure to run the ac compressor so it doesn't even try to turn it on.
Happening to my Camaro right now but when I click the Amazon link it’s out of stock do you know where else I can buy it.??
Let me look up another one for you but what year is your car exactly?
I updated all the links on my description. i hope this helps you. Sorry for the delay in response
What module would i need for a 2015 camaro rs
@@jstrickland8875 hey, yes i did my best to list as many as I could on the description. Could you please check the list? It should be listed on there. Best of luck.
Good afternoon do you know where I can find a fuel pump control module for my car I have a 2013 Chevrolet Camaro SS
This is the fuel pump module assembly amzn.to/3LuWYl6
Hero!!!!
Thank you so much!
What is all lights work,fuses,relay & refrigerant are good but only blowes hot air ?
That is more related to your blend door. it may be stuck on the heater setting. Check other videos on youtube in reference to the blend doors for your camaro. Hope this helps you out.
Do we have to take all the stuff off to get to the control module
Yes, to avoid breaking anything yes. But the difficulty of this repair is actually very easy. It may seem like a lot but it's not.
Mine is just blowing hot air for heat but very low. My mechanic said the little button damage. I’m wondering if I need to order the whole radio or just the module. Any suggestions?
Any more details on symptoms?
@@EddiesCustomsandRestorations it takes about 45 mins-1hr for the air to get warm not even hot. And when you turn on the car, it goes straight to AC even if it was on heat before. The ac button on even when it’s on heat, i have to press the button to turn off the ac. I live in NJ, I just don’t drive sometimes.
@@trevoramaru6106 okay so what i would like for you to check now is visually inspect your water pump. Crazy I know, doesn't seem related but the thing is is that your heater needs a few things to work and 1 of those things is proper flow through the heater core. Open your hood, and see if you see an orange line of dried out antifreeze that got slung around by the belt. The orange line would be on the underside of your hood, and on some areas there by your belt. If you see this then your water pump is leaking out the weep hole or somewhere there and needs to be replaced. This would affect your heater performance. Another thing to try is, make sure your vehicle is warmed up, put the car in park, set the heater on low to where you can feel it with your hand only, and then rev up your car a little bit to like 3000 rpm (3) and hols it there for a little while. If you feel that the air at the vents gets warmer, this is an indication that you have either low coolant or the pump is simply not pushing the coolant through enough and should replace the pump. Hope this information is useful
@@EddiesCustomsandRestorations I will try that. Thank you bro
Hey, my 2014 Camaro only blows warm air. I tried replacing the compressor and the ambient air temp sensor but nothing is working. Any ideas? It also displays the wrong temp, I have no idea.
When you say it displays the wrong temp, are you referring to the outside temp?
@@EddiesCustomsandRestorations yes, that’s why I thought it was the sensor but I replaced it and it’s still doing the same thing. Maybe the wiring?
Thank you
Thank you! It worked!
Heey glad it worked!
Does it control the heat also?
yes sir it does
Eselente. Gracias
Gracias!
I don't have heated or cooled seats but the fan speed control is changing the temperature of driver side and ac heat control Changes passenger side what would cause that
Its very possible that it would be the module since that is the one controlling all of those control that you select and when it internally fails, it can behave that way
Im having that problem on mine to
i saw this video so now i know what the problem is , i ordered the part but received a dual zone temp module , now i don’t know where to get one from
It should be available through Amazon there. They may have sent you the incorrect one....did the item look like this?
I have the same problem except the functions light up when I switch it. My problem is that when I turn the level of the fan up or down the car doesn't blow any air at all
You may want to check your blower motor. Its the round motor and see if you can give it power and ground and if it doesnt spin then its your blower motor and not the controls nor resistor
Im gonna give it a shot since none of my hvac controls work. All fuses are fine.
I hope it works out for you as well 🙏
The issue that im having is that the ac dosnt switch it stays on on the face vents and dont go to defrost or the legs/feet vent
@@trellbailey4700 that will be your blend door actuator. Do a search on that for these camaros and there should be a video out there. I am sorry I currently don't have one out.
I have Camaro also but I problem with Ac it's too cold I can't less cold and without hot air it's only so cold not normal cold what i do ?
you may have a blend door problem if you cant control the temperature.
Be thankful LOL
Will I need one of those if the fan still blows?
Generally if its just the "cool" setting thats not working, you may be facing a different problem like a bad Ac clutch relay, bad AC pressure switch or bad compressor itself.
@@EddiesCustomsandRestorations ohh ok, my heat nor air comes out but the fan works when I switch the speeds 🤦🏽♂️
@@southsidemusic you have no heat AND no Cool?? Both not working?
@@EddiesCustomsandRestorations correct, but the fan blow 🤦🏽
@@southsidemusic i see. Well in this case since you dont have both then your blend door might be borken or stuck the one that selects the temperature setting. So take a lot at this video here im sending you a link of so you can check that. ua-cam.com/video/wTatquprmJ4/v-deo.html
My heated seats work and everything blows out fine but no cool A/c and no hot heat, what could it be and antifreeze is full and have plenty Freon
Hmm a blend door could be stuck or broken. Check out other videos on youtube in relation to camaro blend door problem. It may be what youre looking for. Hope this helps.
ua-cam.com/video/wTatquprmJ4/v-deo.html
Cloie the cutie 💓
😊
Okay I changed the AC control module and now the AC is blowing out hot air and the AC will not turn off on my 2013 Chevy Camaro SS…I don’t know what else to do
Try disconnecting the battery and leaving it disconnected for a minute or so and then reconnect. This will allow all modules to do a nice reset and should go back to normal ofcourse if everything is in good working order. If it doesn't solve the problem, there may be a stuck blend door issue which is common on camaros. Here is my video that takes you through the steps for the battery disconnect. ua-cam.com/video/xQChJuowPbE/v-deo.html
Okay thank you will try it
@@tamarawilliams1575 hope it works for you 🙏
I bought 2 brand new ones and once I install them it makes my air auto climate and I can’t control it or turn it off
How does your old one work?? Have you attempted to do a reset on everything completely by disconnecting the battery at the trunk and giving it a minute or two disconnected so it can all refresh?
@@EddiesCustomsandRestorationswell I think I discovered the problem I ordered 2 brand new ones and I think they were meant for touch screen controls which I don’t have so I got on eBay and ordered an original 2012 piece and replaced my old one now my car blows ice cold air and it drives smoother my old one made my car jerk a lot but this new one I have makes my car drive smooth as butter apprecuate the tip brother💪🏾😎
@@TheRealPoPorter oh sure am glad it helped! And sorry it didn't work out the first time. I bet the frustration was terrible! Well glad it worked out, stay cool 😎
no heat or ac
How about 2018 model
Haven't come across 2018 just yet im sorry...
I replaced mine but still ac-or heat now what
Nothing at all works? Describe all the symptoms please.
@@EddiesCustomsandRestorations ok i put a scope up in there and found blend door! Thanks for your help! Great videos!!
@@nickanderson3675 thank you for your kind feedback. Sure hope you solve the issue you are having.