Those specific turbos as a twin setup on a 5.3 suck. 6.0 guys have had ok luck with them but they don't make the power they should in my opinion. I went from those to 69/73's with the .96 backsides and it was night and day difference. Actually the change was so drastic I was convinced something was wrong with the motor with 78's on it but turbos were the only change.
Josh, you need a porta bandsaw with as much fab as you do. Cuts like butter literally. .Game changer. And swag offroad makes a stand for it to make it a vertical band saw.
I think my long tube headers with the y pipe that looks like it had cats but not really came with the right hardware but it was Chineseium and crap and I had a striped hole or broke stud I had to drill and messed it up I don't remember but I just taped it for some sae size and it was fine
I made one run on turbo at 30 psi boost and made it 550ft before waterpump exploded. After that I let off and stopped asap on side and slip showed like a 6.80 in 1/8. Not totally sure on time, sorry I wish I could have at least made the 1/8
@@SniderTron3000 like more toward the fenders... I know it's adding stress points but can you add some pipe to make them closer to the lights or no bc of the cast
No disrespect to Pops but it's not like he's had dozens of passes now that Jack Black has been turbo'd. this is gonna be a whole different animal to say the least.😮😱👍👍
@@SniderTron3000nah man because if that was me and my dad we ripping the fuck out of it to dial it in haha a lot goes on behind the scenes haha like oil leaks or blown head gaskets it’s good to have that not in a video sometimes haha good video man
I mean pops was doing nitrous big block test hits on street tires out on back roads lol and the intro he runs the truck sideways down the road 500'. I think he be aight lol
God damn, I'm not a virgin to drag racing. I was doing this shit back in the 70s before you were probly born. For our boost we hooked up aviation jet fuel to a switch, made nitrous look sad but motors didn't last long lmfao
This is the way to go more boost to equal to the weight of the truck being it’s a little heavy it’s going to get a lot faster.. low 6 seconds high 5 will be great for your setup in jack black ❤
I know that those tubular headers are easy, and aesthetically more pleasing... but kind of shocked you didn't just use some flipped manifolds. Plug wire clearance is a lot better. Either way, it's going to be rad and the old man is going to have a legit rocketship.
What spark plug wires did you run on jack to where they were long enough to route them like that? Been wanting to do up and forward headers on my Ls swapped second Gen camaro but was worried about burning plug wires 24/7. That looks like it’d be just fine! Awesome video as always curious to see how jack will respond with the twin 78/75’s this upcoming season!
Ol jack came a long way from running them boat anchor dinosaur motors to running twins in a modern LS……progress is awesome…..but flippin the old man is even more awesome!!
Nice job🔥💪🤝👍💯
From 350 to turbo bad azz truck
It would be awesome if u did a giveaway on the old turbo u took off Blackjack..
It's jack black, not blackjack
@@papatron-gr4wg my bad
Just giving you a hard time, the complete turbo setup off jack went on the 55 including exhaust. That's the nice part of all vehical running LS motors
What kind of spark plug wires that did you get? What is it for a specific engine?
I LOVE twins!
NICE!!!!! Jack Black is gonna be crazy
Hellyeah now jack black is getting thirsty lol
Love it you guys keep stuff so interesting I look forward to all your videos keep kickin ass
Does anyone have link to the exact turbos idk what kind to get in eBay
www.ebay.com/itm/254877579580?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&mkscid=101&itemid=254877579580&targetid=&device=c&mktype=pla&googleloc=9017327&poi=&campaignid=20394324446&mkgroupid=&rlsatarget=&abcId=9317262&merchantid=549700841&gclid=CjwKCAjw5_GmBhBIEiwA5QSMxCGkH9M6QN7NHamhBqw45Zrz-R1dgBWJyeb_W6op7aBDDC8bNoykuhoCToUQAvD_BwE
Bro, please don't stop making videos!
Really enjoyed watching , thank you👍🏼👍🏼👍🏼👍🏼
Best. Intro. Yet. 👌👌👌
The eBay 78/75c I see have .96 Hotside housings, where did you find smaller?
I've seen .96's, .81's and .68's. I just searched "T78 Turbo" in ebay and a bunch of them come up
@@SniderTron3000 Didn’t the RX7 have the larger .96 exhaust housing?
@sniderTron3000 where did you get the trubos from do you have a link ?
You're a competent enough fabricator, you should consider tubing the front of jack.
I dig it twin the skylark too
Damm poppatron wants to go fast in 23 gonna be sweet when done
Hopefully!
I'd like to put a single turbo on my 4.3 that would be fun!!! 😎
Those specific turbos as a twin setup on a 5.3 suck. 6.0 guys have had ok luck with them but they don't make the power they should in my opinion. I went from those to 69/73's with the .96 backsides and it was night and day difference. Actually the change was so drastic I was convinced something was wrong with the motor with 78's on it but turbos were the only change.
I want a budget friendly trubo kit for my lq9 6.2 gen 4 would these work good for them ?and do you have a link for them ?
Hell yeah Josh..can't wait to see ole jack at track day on here
Went to church tonight after my son asked me, so we’ll continue with the Amens. Fantastic decision
Arkansas here, man I love watching this gets my engine ah running if ya kno what I mean 🤣🤣
Josh, you need a porta bandsaw with as much fab as you do. Cuts like butter literally. .Game changer. And swag offroad makes a stand for it to make it a vertical band saw.
Pops was really smiley at TWINS !!!!
Congrats on the newest tribal unit!!
Thanks, buddy!
Radiators are over rated
I think my long tube headers with the y pipe that looks like it had cats but not really came with the right hardware but it was Chineseium and crap and I had a striped hole or broke stud I had to drill and messed it up I don't remember but I just taped it for some sae size and it was fine
Hey you got scammer I think that means you made it
I’ll buy your old set up from you
Nice brother 🤠
What’s the best run on the current single turbo setup ?
I made one run on turbo at 30 psi boost and made it 550ft before waterpump exploded. After that I let off and stopped asap on side and slip showed like a 6.80 in 1/8. Not totally sure on time, sorry I wish I could have at least made the 1/8
Did the red dually grow….and turnt crip on us😂
Noticed that, huh? Lol
At the beginning the subtitles said foreign music lmao
Dude jack is going to be badass hang on pops and drive the shit out of it
Your dad is right. 😊
💪 Friggin shweeet 🏁
Yes love me some jack black content
Love the obs content!!
off subject but I think it's time for a new intro
Been waiting for this. You think pops liked the boost before he's gonna love it now
Since it's just a race truck take the high beams out and make ducts right to the turbos.. that would look awesome
That was my plan, but I was hoping the turbos were gonna be more in line with the lights so they would be kinda visible
@@SniderTron3000 like more toward the fenders... I know it's adding stress points but can you add some pipe to make them closer to the lights or no bc of the cast
Did Jack ever make a good pass at the track with the single? If so, I'll go back and watch.
There was a wheelie on a bare street and we had it at the track one day and Jack FREIGHT TRAINED a 5th gen Camaro. It was making some steam
@@SniderTron3000 I saw that track day, couldnt remember if it was a clean pass or if Jack had issues.
Let's hope Capt.Inferno can keep the twins from visiting the island of Skatagascar.
We'll see lol
@@SniderTron3000 I hope everything goes well for you and pops with Mr. Black and his twins.
What throttle cable did you guys use on this
No disrespect to Pops but it's not like he's had dozens of passes now that Jack Black has been turbo'd. this is gonna be a whole different animal to say the least.😮😱👍👍
I mean, its not like we film every single time we take it out. I bet he's got more runs in the truck than you'd expect
@@SniderTron3000nah man because if that was me and my dad we ripping the fuck out of it to dial it in haha a lot goes on behind the scenes haha like oil leaks or blown head gaskets it’s good to have that not in a video sometimes haha good video man
Have you had a turbo car? The motor has no clue it’s single or twin. Just boost pressure. It can be tuned the same.
I mean pops was doing nitrous big block test hits on street tires out on back roads lol and the intro he runs the truck sideways down the road 500'. I think he be aight lol
God damn, I'm not a virgin to drag racing. I was doing this shit back in the 70s before you were probly born. For our boost we hooked up aviation jet fuel to a switch, made nitrous look sad but motors didn't last long lmfao
Josh I'm so happy for pops and Jack your old man has got a set of balls much respect to papa tron.
That's the same place boostedboiz use to get their turbos
This is the way to go more boost to equal to the weight of the truck being it’s a little heavy it’s going to get a lot faster.. low 6 seconds high 5 will be great for your setup in jack black ❤
Oo come on, your dad said something we all want to know
@SniderTron3000r I know snider, lol. You ain't him
I know that those tubular headers are easy, and aesthetically more pleasing... but kind of shocked you didn't just use some flipped manifolds. Plug wire clearance is a lot better.
Either way, it's going to be rad and the old man is going to have a legit rocketship.
Do you have the link I want I do this set up and I can’t find it
Couldn't wait for twins the single setup barely had a season on it lol
Not to mention twins are amazing for minimizing back pressure… can’t wait to see it progress.
What spark plug wires did you run on jack to where they were long enough to route them like that? Been wanting to do up and forward headers on my Ls swapped second Gen camaro but was worried about burning plug wires 24/7. That looks like it’d be just fine! Awesome video as always curious to see how jack will respond with the twin 78/75’s this upcoming season!
Love seeing Jake back in for more upgrades!!!
Ol jack came a long way from running them boat anchor dinosaur motors to running twins in a modern LS……progress is awesome…..but flippin the old man is even more awesome!!
What's your thoughts on the bread box intake manifold for street use
I love it. Its by far my favorite factory intake
👍👍
Awwwwww shit! Let’s gooooooo
👮♀️👮♀️ blowers are better. 😉😉lol