Never heat the vinyl close to the area where it is glued to the panel, keep a distance of at least 10cm and heat from there. In this way glue lines and stretch lines are avoided
@@keydz1173 not too bad. Wanted to do the spoiler on my helmet. Thought i could do it with one piece but needed to do it in three separate pieces. The one piece wrap looked ugly on corners but stayed in place quite well. The multi piece wrap is better and doesn't peel on the corners. Heat gun is recommended. It's a cheap foil for the first time though
I'm sure anyone that has some kind of knowledge of doing cosmetic or different things to a car for looks can do anything like this but when it comes to corners and things like that that's where I believe a short would come in handy to learn how to wrap around corners
Small pieces like this are easy, and it’s not a piece that can be put on the car. The pieces people are putting on cars and trucks are a lot bigger and a lot harder to work with. I thought I could wrap my truck with vinyl wrap but watching one of these videos and I was wrong lol
@AllenCars I actually just started a few days ago, I'm wrapping my Harley, and being the noob that I am, I've been making it harder than it needs to be and this video is exactly something i was struggling with!
Question: just say that you were laying out just one piece of wrap (let’s say that blue piece in the centre of your hood as a feature) once you have laid it down, should you then add a small amount of heat to make the adhesive stick more or just leave it as is? TIA.
Stupid question my wrap came with a plastic layer on the shiny side. Do you remove that before heating up or once you’re completely done and have it all squeegee out?
That’s actually bad tension, once you cut and tuck if it heats specially on hood, it will start peeling because you’re forcing it to hug the edges. Pulling and stretching helps but it also makes wrap peel up fast on the long run
Watched many wrapping videos, Tried wrapping my crv myself... pissed off the whole time, took 3 hours to wrap the hatch, just pay someone to do it otherwise you'll waste all your vinyl. I promise.
it is a 2005 chrysler crossfire Limited. the channels on this hood are awkward. since only chrysler seems to have cars with this type of detail. and it looks like a particularly challenging area. idk if lift and pull is the move or if we should glass, post heat, and work the groovesthat way @@AllenCars
@@AllenCars been wrapping for over a decade you muppet…. You don’t heat on a flat panel like that, laying it on properly and tension is enough, I can wrap a whole bonnet without using heat until I have to seal the edges. If you want me to prove it and put you in your place and teach you I’ll make a video of it
Never heat the vinyl close to the area where it is glued to the panel, keep a distance of at least 10cm and heat from there. In this way glue lines and stretch lines are avoided
True true
THANK YOU! HOLY SHIT! SOMEONE ELSE GETS IT!
Thanks we will have more tips today at 5pm
Will be doing my first wrapping soon, good to see these short clips that get straight to the point
How is it
@@keydz1173 not too bad. Wanted to do the spoiler on my helmet. Thought i could do it with one piece but needed to do it in three separate pieces. The one piece wrap looked ugly on corners but stayed in place quite well. The multi piece wrap is better and doesn't peel on the corners. Heat gun is recommended. It's a cheap foil for the first time though
glad everything went well. what did you struggle with?
www.allencar.net
thanks finally someone who doesn’t show off and actually explains how to
All we are here to do is help
@@AllenCars i wanna wrap a abs plastic bumper i have sanded it and primed what is also needed before wrapping ? tis
@@CHB_98 wipe it down with alcohol and put some Primer 94 then wrap it
@@AllenCars thank you would you know if there is an equivalent to that in toronto canada ?
😮 why is this better than a paint job
“Glass it out” is what we say at work. Makes it so much easier to work with
we say the same thing but to the new wrappers may not understand the terminology.
www.allencars.net
I'm sure anyone that has some kind of knowledge of doing cosmetic or different things to a car for looks can do anything like this but when it comes to corners and things like that that's where I believe a short would come in handy to learn how to wrap around corners
Good tutorial brother!
Small pieces like this are easy, and it’s not a piece that can be put on the car. The pieces people are putting on cars and trucks are a lot bigger and a lot harder to work with. I thought I could wrap my truck with vinyl wrap but watching one of these videos and I was wrong lol
Thus the reason why we suggest you coming to our wrap class www.allencars.net
I thought doing tint I could do a wrap definitely humbled me but I got it done thanks to videos like this
If you want to be more efficient you should join our UA-cam membership for car wrap videos that are more in depth
Finally someone that knows what they’re doing!
Thanks we really appreciate it
Thinking about taking the leap & getting my certification
Go ahead
Thaaaank you. Finally someone who gets right to the point and actually shows what they're explaining. 👏🏻👏🏻👏🏻
THANKS How Long Have You Been Wrapping
@AllenCars I actually just started a few days ago, I'm wrapping my Harley, and being the noob that I am, I've been making it harder than it needs to be and this video is exactly something i was struggling with!
Thank you ❤❤❤❤❤!!!
glad this helps. www.allencar.net
I remember my Cat growing up. Orange cat, we named him squeegee
Oookkkk
And don't forget to have a blessed day..
But say like that 150 buks guy..
Go with the trend my dude
Question: just say that you were laying out just one piece of wrap (let’s say that blue piece in the centre of your hood as a feature) once you have laid it down, should you then add a small amount of heat to make the adhesive stick more or just leave it as is? TIA.
Depends on the vinyl but Ideally yes
Stupid question my wrap came with a plastic layer on the shiny side. Do you remove that before heating up or once you’re completely done and have it all squeegee out?
Will a wrap work on flat black paint I mean will it adhere to the body or the paint
The vinyl will not stick as well as you think
Hmm I stretch mine out to glass it and it tears almost every time… is wrapping a car done with tons of small pieces?
You probably have cheaper material
My names allen and id love to learn how to wrap a car
Say brother can you use a hair dryer instead of heat gun?
What tools do u recommend, I kno the basic ones but is there any special tool that’ll help a lot or anything, gon be wrapping my car soon satin black
Here's a full tools and equipment list. docs.google.com/document/d/1v2AqnS58EY7RUguCaHT07nwFzCVwmu8EZd1wS_1ezlo/edit?usp=drivesdk
@@AllenCarsdont work?
@@diegov7122 works every time
That’s actually bad tension, once you cut and tuck if it heats specially on hood, it will start peeling because you’re forcing it to hug the edges. Pulling and stretching helps but it also makes wrap peel up fast on the long run
The amount of tension was less than 3% for this video . Anything over 10% will peel back. Nice try
soothing ass voice
YEAAA BUDDY
How do I join yall class where yall located
My question is what to do when ghe wrap or that side sticker comes out
I'm not understanding what you are asking
I'm in California i love to join your class
We are trying to have a class in Cali this summer. Www.allencars.net
Hi i will like to wrap the roof on a 2018 Honda accord
Did you want us to teach you or did you want us to wrap it
God loves you!!! Stay safe!!!! ✝️💜✝️💜 don’t forget to thank Him for the day!!! I hope you get everything you want and more!!!! Stay blessed!!! ✝️😇💜🙏🏽
All the time
Watched many wrapping videos, Tried wrapping my crv myself... pissed off the whole time, took 3 hours to wrap the hatch, just pay someone to do it otherwise you'll waste all your vinyl. I promise.
Or toy can take our class so we can teach you the correct techniques. Www.allencars.net
Color change film PPF transparent car clothing manufacturers need to chat privately
www.allencars.net
I have a question. My hood has rain channels in it. Not very deep but they spread across the hood. How can I wrap this area of the car
What's the year make and model of your vehicle
it is a 2005 chrysler crossfire Limited. the channels on this hood are awkward. since only chrysler seems to have cars with this type of detail. and it looks like a particularly challenging area. idk if lift and pull is the move or if we should glass, post heat, and work the groovesthat way
@@AllenCars
Where do you buy your vinyl wrap and heat gun?
would you like for us to send you the link
Do you need a heat gun to wrap will it work without one
You will need a heat gun
SIck❤
Can i wrap with a hair dryer ??
Yes it’s possible 😊
Can I heat with a regular blow dryers?
no no no no
Which company wrapp sticker is using?
3m
You should never heat on a flat panel like that, absolutely ridiculous
If you only knew what you was talking about
@@AllenCars been wrapping for over a decade you muppet…. You don’t heat on a flat panel like that, laying it on properly and tension is enough, I can wrap a whole bonnet without using heat until I have to seal the edges. If you want me to prove it and put you in your place and teach you I’ll make a video of it
💯 Read your wrinkles
Can you tell me a European store that sells good quality equipment and gear.
Honestly I wouldn't know because we are in the us
Yeah USA is better than Europe🤒🤒🤒🤒
Will this technique work on my partners face?
I can just do it with a hair dryer?
Yes but no
What states do you actually do classes
Florida, Illinois, North Carolina, Georgia Louisiana etc
@@AllenCars oh damn I’m looking for the upper east coast thanks though the pa, nj, ny area
@@TruCunt ok let us know if your don't find anything your way. www.allencars.net/challenge-page/3877d432-7e60-4ade-84f2-c95939da2b39
@@AllenCars do you service those areas as well?
How l join the class
Click the link. Www.allencars.net/workshop
Where the class info
Www.allencars.net
Bro left two lines. BRO FIX IT
Lol its a demonstration
How long is vinyl wrap life???
I wish I could afford this!
Join our 1 day in person class or our online class. Www.allencars.net
Man...
What's up