Hey man, you have no idea how helpful this weirdly specific video was to me. Thanks a lot for the upload! I was able to replace my hot-end on my superracer, didn't realize that there was another screw holding in the heating element on the heater block.
I have a big problem. Everything is cleaned, nozzle and so on, but I have PLA near the entrance off the white tube. I can't put the white tube inside. How can I take it off?
I just ordered my SR and I want to upgrade the hotend and nozzle ... just want to add to the mix that it's my first printer and my first time printing on 3D..... what software do you recomend to use and design for this particular model in your experience? very instructing simple video......
Thanks a lot for this, you may not get many views but this is hugely helpful to the right people. You rock for recording and sharing, have a good one.
Hey man, you have no idea how helpful this weirdly specific video was to me. Thanks a lot for the upload! I was able to replace my hot-end on my superracer, didn't realize that there was another screw holding in the heating element on the heater block.
Thanks for the info. My hotend was loose and you showed me how to do it. Great video
Thanks for the vid. Just got my super racer and gonna be doing these upgrades.
I have a big problem. Everything is cleaned, nozzle and so on, but I have PLA near the entrance off the white tube. I can't put the white tube inside. How can I take it off?
I just ordered my SR and I want to upgrade the hotend and nozzle ... just want to add to the mix that it's my first printer and my first time printing on 3D..... what software do you recomend to use and design for this particular model in your experience? very instructing simple video......
como mierda lo has sacado? a mi no me sale el hotend de la pieza metalica que lo sujeta 1:22
is there a set distance that the nozzle has to be protruding out of the heat block?
Yes there is. For reference your nozzle needs to fit within the Z probe.
Did the 2mm Allen key come with the included tools or did you get it separately?
I’m not sure. I keep a tin with tools from all my 3D printers.
If you're talking about the one he used to remove the fan ducts, then yes it does.
Do you know what the voltage is of the heat rod and thermistor? 12 or 24?
I do not know, guessing 24V
Did you confirm my printer is on its way and I want to order a new e3d hotend just need to know the cartridge voltage
The printer runs 24V (fans, heated bed, heating cartridge etc.)
The hole on mine isn’t big enough for the hot end to fit through.
Same problem here bro
Same
you should re-upload this without the bloody music