Dent Repair Tips! Have Tried This Magic Trick?
Вставка
- Опубліковано 18 тра 2022
- This dent tip is like performing magic. Leaving the paint intact on this BMW M3. You see the dent. Now you don't.
Training email me on this site
tinyurl.com/36529zkp
PDR Training secretpdrpaintlessdentrepairtr...
Collision Tools
pdr-training-tools.com/en/
Auto Body Suction Cup Slide Hammer for Dent Repair
amzn.to/3tBPtj3
Dewalt 20V Cordless Polisher
amzn.to/3QjM2aH
Plier for rolling sheetmetal edge
amzn.to/3mP5pegn
4oz Ballpeen Hammer
amzn.to/3mOL8p4
Gorilla Tape
amzn.to/3aViJLf
Soft Hammer
amzn.to/3mOnHMw
PDR Knock Down
amzn.to/3aYS5Bo
www.39-mobile-paintless-dent-...
pdr-training-tools.com/en/
secretpdrpaintlessdentrepairtr...
dentdiscountmobileandbodyshop...
www.yelp.com/biz/dent-discoun...
www.yelp.com/biz/dent-discoun... - Авто та транспорт
How much you charge to attend your classes
Dent training prices email me through this website
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Amazing unbelievable work
Amazing job Clark, to be fair this isn't something I could do as a mobile PDR tech on the side of the road on a busy street, it's definitely more suited to you guys in a nice dry workshop. Working for BMW for so long I know these E46 doors very well and they have a crazy complex internal structure which is nearly all double skinned, so the fact you managed to get that all out is amazing, you certainly are very talented sir! 👍👍👍
Jake thank you so much for your comment I really appreciate it.
I agree with you I would not do this door mobile either. Here is lil insider secret to this door. The main intrusion beam unbolts. Thank you for stopping by and sharing.
Having been a heavy collision body man many years ago, I am astounded at what you can do. We would have probably reskinned the door and had to cut the part in, blend and reassemble the door etc. Amazing work
Carl thank you for your comment I really appreciate you sharing on my channel.
This guy is so good, you wouldn't think looking at finished job, that any collision damage, had happened at all. I got out of motor trade back in the nineties. Nothing like this was around in them days, but go back further and craftsmen, as they were known has then, they beat a panel flat and straight, with the curves in the place, all with a dolly and hammer.
New Sub.
Clark, thank you, Sir.
I've been beating, banging, bondoing and painting since 1965 started at 13 years old. Never been satisfied with having to use body fillers. Drifted away from automotive for a few decades while I built several successful businesses one with over 200 employees (precision metal fabricating). I only mention that because my secret sauce like you was quality, and customer satisfaction along with being a pioneer and pushing and stretching the envelope and developing new and unimagined techniques. Like you I always wanted to know more about how metals reacted to forces.
You sir are most definitely a Master Craftsman and innovator. I ultimately got back into cars and motorcycles. Even done several frame off concourse and thourobred cars (1st place national winners) Learned really old school metal shaping so I could rework or remake body parts or even produce custom parts without fillers or only a skim coat. I wanted to learn PDR several years ago as an income source after retirement. However, I learned that the market was saturated with techs in my area. But now you've got my sincere intetest and creative juices flowing. I like the challenges of paintless "Collision" repairs. Your mastery of your craft and what you do is exactly the kind of challenges that make me tick. What you do always makes sense to me and is how I would approach the repairs and improvise when necessary. Now retired, I would definitely like to learn more. Trying to justify the expenses but would like to talk to you in the near future about training. If I can justify it I'll be in touch. I truly appreciate you sharing like you do.
Thank you
I think you are one of the best I ever seen your technique is unique and above all the rest 👍
Unbelievable! Nice work
Mr Clark You Do Amazing Jobs
Bro this is simply amazing. I watch all of your videos and I'm always left surprised with the dents you pull...
Thank you for your comment I really appreciate it
Another absolutely amazing job. Low-crown door skin with very difficult damage! Always enjoy seeing the very best go at it. Cheers from Canada.
Hey mate, just wanted to say thanks, i did my first pdr yesterday, on a moto tank, a 110mm vertical creased line, with a few 20 - 40mm round dents, and used the methods i learnt here from you sir., and got a great result. thank you..
Right on my friend I’m glad your learning and apply your skills
Thank you for sharing
Hello from Serbia!
I can see you play the game with this demage panel. It's pleasure to watch it and learn by your videos!·
I am the very beginer.
Thank you for all
You do amazing work!! I’m need to your channel. My roof opened while driving the hood smacked my roof how do i post a picture to show you?
BRO!!!! your my freaking hero! I always learn so much watching you. I've tried doing so many of these and they never even come close to what you can perform. Im definitely going to get me a bridge puller. Watching how it releases that pressure and all let's you tap down while keeping the tension is awesome. Im a mobile guy doing wholesale and auction work. This would be a game changer. After watching you I feel like I'm still playing tee ball and your the mvp in the majors. Lol kind of like the other 6 pdr guys who passed on the job. Thanks for all you share Because of you, I'm getting better! Btw Your new into showing all that metal moving is amazing. I love all your content. You make amazing videos that explain so much without wasting time. The editing and different views that show you all the damage is the best. there are so many times i can't even get a good picture of a dent but somehow you always get the perfect angle and perform miracles on these panels. I haven't seen anyone that's even close to what you can do. Keep up the great work! I can't wait to see what you do next.
Thank you so much for sharing on my channel I really really appreciate it
New subscriber I fell down this rabbit hole hard. Great channel I want to get the hail out of my truck now I might get into it seems so satisfying.
Welcome to my channel thank you for subscribing
I'm just getting started in collision repair. I retired from the military and wanted to do something fun that I could enjoy for years to come and make some money. I'm really interested in glue dent repair and paintless dent repair. I just started watching your UA-cam videos and I'm amazed at how easy you make it look and how nice it looks without damaging the paint. Any pointers and tips on how to get better is very much appreciated.
NEW SUBSCRIBER!!! Started looking because my wife's car has a dent. It's not even that bad and she was told it couldn't be pulled. Very interested in PDR now. Plan on retiring from oil Industry in a few years. This may turn out to be a side hustle for me. Going to start with her car and find local junk yards to practice and hone skills.
How long is the shool and you have a shool in Europa?
Wonderfull working,thx for the videos
I am new here in this channel. I am amazed with the work you do. I want to learn more from you Buddy!!! Thanks a lot for sharing you knowledge with us. Take care
Welcome to my channel thank you for subscribing
Hey Bro!! I’m new in your Channel. Amazing job! Congrats!!
In 2014 I bought a new Mustang GT. Within a week, the neighbor's pine trees dropped un-opened pine cones on the car. It looked like major hail damage. I bought some PDR tools and got all the dents out. I've done some more complicated dents on cars since then. I guess I had to start somewhere.
Very nice I’m glad you were able to figure out the PDR tools
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Excellent work, as usual. I am trying to develop the patience to work dents like this with PDR techniques. I normally give up and whip out the filler....
Thank you so much for your comment I appreciate you sharing
hi man of steel! I'm new to your channel and really impressed with your results!! Being myself a body repairer, I know the work it requires and really all my respect! Looking forward to one day meeting us to discuss! Hello from France 🇫🇷💪🏼
New subscriber. Do have some questions about my driver side back door on my truck.
You sir are a Master Blackmith, I'm amazed on your level of understanding, on the movement of metal, not only from the panel, but the frame. Truly a Master of your craft.
Thank you John
Awesome work! Well done 😊
Alexander thank you
Great work as usual.
Keith thank you
I'm a new sub and this is pure art!
Smith thank you for your comment welcome to my channel
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
You're awesome buddy yes I like to learn more I'm in the body shop industry
Eric thank you for your comment
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
love your channel, I am a new subscriber and new to dent pulling.
Welcome to my channel thank you for subscribing
Master you have done it again brilliant job like always I’m saving money to get one weekend one on one training with the men of steel can’t wait👍
Alfredo thank you for your comment
work too top brother congratulations 💪🔥
Thank you so much I appreciate that
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
From your Videos I have learned so much, thank you.
If I lived in USA, I would definitly visit you to say hello and thanks.
Once again......nice work !!!!!!
Mark thank you
amazing work i have an 85 chevy pickup with some serious bruises wondering what best glue to use my shop is 60 degrees iam not worried about paint pulled some paint already with cheap amazon yellow glue trying to use as little filler as possible
Another excellent job sir. As a BMW owner myself, I hold the standards of presentation to a high level for both my BMWs, and the rest of my wheeled fleet!
Dachs Auto you always come through with a great comment I appreciate it
Great thank you
Thank you for your comment
I've never tried pdr before. My dad taught me auto body work back in the 80'$. I I guess I'm what you call a shade tree mechanic / body man. I've been spraying since I was about 15 along with airbrushing. I'm almost 50 now and never really went professional. I had an opportunity about 20 years ago to airbrush motorcycles for easy rider mag. I wish I had took the opportunity but now I've got my head screwed on straight. I'm stepping up my game. Last Chance in life for me I hope it all works out. Thank you for the videos brother you've really introduced me to a different world of body work.
Thank you for sharing on my channel
Yes would help
The best dent remover I have seen ever .
Jeffrey thank you for your comment
Great work man
Colorado thank you
Love your show I have 95 bmw 325i I got hit by the side right rear fender not bad this was educational
Joe thank you for your comment
I'm new to PDR and it's more of a hobby got a lot of beat up stuff and so do my friends I would like to know what kind of glue you use you are clearly a magician and I'm thoroughly impressed nice job thank you for the videos
pdr-training-tools.com/en/products/glue-glue-guns
Kevin thank you for your comment
PDR has changed a lot I have been a body tech for 35 years and PDR was basically hell damage but now it,s a lot more very time-consuming but less costly in material but the question is how much.
Gratework
Just to show that not all pdr men are created equal. You are in a league of your own! Epic work
Gizmo thank you for your comment
RESPECT!
Very good work 😃
Para thank you
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Amazing work as always. Interested to know what glue or body picks you use for top of door body lines with hard hits?
pdr-training-tools.com/en/products/glue-glue-guns
Thank you for your question
The man of steel.
Thank you Chris
New subscriber here. Amazing PDR work Sir 👍
Welcome to my channel thank you for your comment
Amazing job 👍
Thank you
Yes im ready sir.
Thank you for your comment
hello there. where about are you located? I got very rare car with rare original bmw paint. will you be able to take care of small dents without taking anything apart? I am talking about hail size dents which was not caused by hail.
Amazing, the Yoda of Steel strikes again! I would fly where ever you at to learn from you.
Thank you for your comment
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Hi, you make magic 🎩, man of steel .
Thank you
I do not work for any body shop but I want to learn and know how to do all this. I believe it's amazing; your channel and you are very educational. Thanks and regards
He makes it look easy..
Thank you for your comment
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Yo soy principiante, estoy comprando herramientas de a poco. Tus videos me son de gran ayuda. Para mi tu canal es de lo mejor que hay.
Thank you for your comment sorry for the language barrier
@@DentDiscountPDRBodyShop He said that he’s at this field and he’s getting tools little by little and your videos are a great help and that you’re the best there is great job
Sorry he’s a new PDR student
Yes
I know it's a BMW but was intrusion beam damaged. If so the insurance company would want it replaced not bashing your work you do really good work believe me
Nice work 💪💪🔨
Thank you
Awesome 👍😊
Thank you for your comment
Clark you are amazing I’m a new Subscriber. Pulling dent’s out of 94 Ford F 350 464 7.5 liter was going the weld pull. You brought me to the 21st century.
You would be overly fantastic at Repousse and pushing the type of Art statute of Liberty 🗽
I m make deer 🦌 and chocolate 🍫 Santa 🎅 molds
1TE8. Thank
PROSIT
Jeffrey thank you for sharing
Best work
Thank you
So awesome!!
Thank you
I'll like more info thank you in advance
Eric thank you for your comment
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Yes iam interested in the training ,I hope it's not real expensive
Wow great one
Thank you
Yes, i want to lern.
PDR training my email is on the website
Send me a message
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Amazing 👏
Manol thank you for comment
I would like to learn
Amazing work! How long does a job like that typically take?
2 days
I would like to learn more how is that possible
Amazing
Declan thank you
Yes i would like get some of .an of steel knowledge
John thank you for your comment
Great job where I can buy the tools let me know please thank you
Hd boss here you go
Pdr-Training-tools.com
I'm NEW to your channel.
Do you have a video of a car having damage to the top portion of the door jam ?
Welcome to my channel thank you for subscribing
How long did this one take?
I've been doing our school body work for quite some years now. Watching your work proved to me that this type of pulling is possible and actually yields flawless results. The work I've seen you do, I need to learn. How do I get started?
Thank you for your comment and question
secretpdrpaintlessdentrepairtrainingonline.com/
One on one training send me an email on this link
Yes I would like to learn how to use a PDR tool on my car...a year ago I got run in to by a drunk lady in a parking lot ...she damage both of my driver side doors...I was able to remove some of the dent with a suction cup but not all of them . I also know that I will need a little bit of paint on a brush for touch ups.....PS I also do body works on the side once in a while but still missing some PDR tools for those kinds of dents.
Maxime thank you
Pdr-Training-tools.com
I havea 2016 f250. Can the out side of the bed be pulled? Thanks
Yes thank you for your comment
Thats amezing i am no pint denter but i am best denter
Would love to do my own work
Well done 👍 thanks ⚒⚒⚒⚒⚒⚒⚒⚒
Luis thank you
first of all nice job sir not only for this BMW but for all of your masterpiece jobs.
second I really need to know how you estimate dents and finally how much this BMW charged.
sorry for my bad English 🤷♂️😅
Yes I want.
PDR training my email is on the website
Send me a message
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Amazing work! I had pdr done on my car and he got out most but not all out. imperfections in the metal are noticeable with small dents (highs and lows) under light. But way better then it was. I know it's an art and hard work. I'm curious how much you charged for this?
Thank you for your comment
I’m not cheap.
@@DentDiscountPDRBodyShop on a bmw with limited run colour - yep customer will pay / fantastic work
You are the 👑
Thank you Roger
I’m a body tech but now I think I would like to learn some pdr tricks
My emails on my website in the video description if you like training
Bondo Bobby had me rolling
A perfect job that YHWH see:4:36-4:39 would be proud of, L'chaim!!
Thank you
I recently bought a pdr glue set. I have been able to teach myself to pull small dents pretty good. But the bigger ones I still have to dent pull and repair. I can't find that much patients in myself
Glenn thank you for your comment
Hello sir, the way you fix a broken car body gives me motivation, but unfortunately I don't have the tools.
My tools are on the website if you need some thank you for your comment
PDR Training Message Me Here!
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
great work mate how much you charge him?
5300
Hell ya
How are you shrinking the stretched metal ?
There’s all kinds of machine to shrink metal
Clark must be major paid considering the jobs he does, reputation, viewer audience and cost of his arsenal of tools
I was thinking door skin that was insane ps new to your channel 👍
Welcome to my channel thank you for subscribing
I’m a beginner , need some of your knowledge on how to pull dents
Luis thank you for your comment