How to change a carrier bearing without a puller or if it is hard to remove
Вставка
- Опубліковано 23 сер 2024
- This is a video that shows you the process of removing a carrier bearing when it is impossible to remove it with a puller from the drive shaft.
We show you how to build your bearing pusher tool out of home deep with a pipe 1-1/2 X 10" Nipple, grab a cap for it as well.
We did this Job on a Vise but you can do it on the floor.
For any more questions or farther assistance leave me comment down below.
here is the list of tools needed for this job as well as some links for Amazon:
(I'm a Amazon associate, with no extra cost to you)
Screwdriver: amzn.to/2Cew5v2
Cutting Pliers: amzn.to/2G5EX8M
Earmuffs: amzn.to/2Ccrk5m
Snap-on Gloves: amzn.to/2H8x17M
Hammer: amzn.to/2H5rHlX
Cut off tool: amzn.to/2CecOtB
Plastic visor: amzn.to/2soMAVH
Tripod used:amzn.to/2snjki7
Please be careful you can get injure while doing this, do this on a ventilated area and consult and expert or mechanic.
Thank you for watching!
Like & subscribe!
Great action and narration. I got lucky with mine...just tapped it off...no puller or wheel cutter.
Excellent video! Thank you ! This is the best video on this repair by far!
People are crappy. If he had a puller this would have been a little easier. Go price a puller...go price a shop.... this is a $10 way to get this done and not a thing wrong with it. Thanks for posting
Bro did you not read the title? Is specifically said if you don’t have one
Great stuff Bro!!! Extremely helpful video, thank you so much, HUGE money saver for my family! Haters, get bent!! Subd
Great video. Helped me out with my truck
I was able to cut the rubber with a pair of snips, little easier than the smoking wheel of death! I just got here because I learned a fun fact. Welding a chunk of metal to the bearing for something to smack with a big hammer seems like a good idea - don't. The race breaks!
good job compa.
Very helpful DIY example, thanks for video. A razor blade would slice the rubber part off in like 3 seconds 👌
Back yard stuff, great, thanks
If it works it works
good video, great job, now to go and do mine! Thanks
Ya
You're a legend
What kind of car did this come off of? I have a 2015 Dodge Charger RT and it seems like the carrier bearing is bad but they don't sell just the bearing, they sell the whole assembly with the drive shafts.
Helped me out a lot
What is causing my drive line to push the carrier barring out after I install it
Can anyone else smell that rubber burning as he's cutting? Oh nastalgia
Great video - a big help, Thanks
The name of the boot?
Thanks buddy, I subscribed btw lol
You do not mention cleaned shaft and grease
@@douganderson7002 too late now, thanks. Lol
a puller is 50 bucks at walmart and a foot long steel tube is 10 bucks and you dont have to worry about damaging your drive shaft with a saw
8inch puller at harbor freight was like $15
@@markadkins7216 i guess thats true i was just going off the one i got. its a 10 piece unit that does steering wheels and tire hubs also
Watch Steven Cox's video on this. He cut the driveshaft from cutting too deep into the bearing. In my opinion, ruining the driveshaft.
How do you juice a screwdriver?
Some of the comments on this are ridiculous. Obviously they have no clue what they are talking about.
so the carrier does not have the bearing in it? the carrier and the bearing are 2 different components? am i right about that?
no he bought a wheel bearing and if you noticed he tried installing the cone bearing backwards to the race side...so he went and got a new carrier bearing and installed it. it wouldve worked if he didnt cut up the used rubber and cradle bracket but in the long run he was better off not tryn to jerry rig it.
Yes he's a shit mechanic in my eyes just for that
@@rudyburgin1433 he used the tapered bearing as a spacer with the pipe so he could seat the dust shield.
@@theenviropro7052 you’re an idiot, he used the bearing and race to install the steel dust cover
Like a surgeon doing spinal surgery!
little hard on the bearing isnt it?:)
lol yh but it seems like hes far away from it
What was with the tapered roller bearing? Funny guy, goo help other than the TRB thing
It was used to push the steel dust cover on
I call bullahit! 400!? U r ripping people off. Just got mine done for 100 at a licenced shop.
Depends on where you go, and live it’s like $375 at fleet pride where I live
Mop
what a butcher
No, he did it the way us poor ppl would do it, and it worked so piss off with the hate comments
@@AmericanRustWorker3369 your so grumpy must be time for your nap so you PISS OFF !!!!!!!!!!!!!!!!!!!!!!
@@fredjones1238 you’re literally the one posting negative comments towards someone trying to help others
I'll tel you what, I have a 2013 Eqinox that needs this and i have no problem duplicating this guy!!
Maybe he is a butcher when he is not a mechanic. How about watch Steven Cox's video on this and then you will see a butcher of parts.