Trouble in paradise for the 2 amigos fabz and metal and wood cant say i didnt see this coming 😂😂 but i give u props for being honest and not just going along
@@MitchellsBackyardLogging Wes , I’m 56 and THIS is going to be my retirement gig man … I cannot afford not to be as straightforward as I can no matter WHO I’m dealing with. IF the other party wants to buy/sell saws that’s his business but imho ya gotta have the product 100% BEFORE ya bring to market … I’m Not saying you CANNOT “work” those Hilic carbs - u can micro drill and use JB weld etc etc but I’m not going to monkey around to try and make chicken soup outta chicken shit! Heck I got an OEM HD-12 carb to my door for $70 and I know for a fact it’s going to deliver plenty of fuel and hold the tune! That hilic is all over the map rich , lean - won’t hold tune to MY satisfaction with the mods I’ve done. Perhaps it is FINE for the stock saw as delivered but most guys in the game WANT the snap, crackle ,pop - increased cut speed.
Some hlic work well some do not....mine did not but I have to say the big dint does wonders beter...is it great idk but time will tell....I'm going dukes as I can't afford oem atm....maybe sometime tho
I think what people are missing is the cost of use equation with the clone saws. If you pay $700 plus for a complete 372 clone ready to run and cut you may as well buy a New OEM 372xp. The clone will have virtually no resale value used where as the OEM 372 will have some market value simple because it is from Husqvarna. You will pay more up front for the new saw but you will be money ahead if and when you need or want to sell the Husky IMHO.
The hnsavrnqua is comparable to a neo or holt.....change out some parts....on Ali it's anywhere we from 125 to 20p depending on which u find...138 shipped to my for from USA CALI
I believe Steve at metal and wood gives the complete saw not just a pho ONlY for that $700 price but it wood be best to ask him direction to know for sure 👍
We personally don't let anything China in our shop period. Jst not worth the hassle. Granted the holzforma clones were the main ones we had come in prior but when we got done the cases and brake handle were the only thing holzforma left. We used OEM crank,bearings,and seals. OEM ignition,carb and intake. OEM oil pump. OEM cylinder kit and muffler. OEM brake,handlebar,and gas tank/rear handle,etc.
@@brandonf1226 yes Steve did make mention of the missing switch but asked me not to mention the coil and carb. I’m simply NOT jeopardizing my good name to misrepresent someone else’s saw to be something that I know it is not !
Yeah he just posted a video today and was using that 72cc hnsavrqua saw seems it was cutting good for under two hundred, he also had a few other saws to run in the wood as well cool video.
@@Houseworksaws it’s not ??? - Says 76.5cc right on the sticker ! Do you know that for a fact??? - I mean I can pull off the cylinder and measure the bore if need be. That would be a REAL kick in the balls IF it’s only 70.6 cc but advertised as 76.5cc …..
@fabzacres-blackcat a saw at 100 exhaust isn't going to turn any more rpms at 104. Especially in the cut 24" wood 24" bar. 104 will hold 12.5 k in the cut where 100 is lucky to get 10k. Now if your cutting a 9 inch cookie. 100 exhaust with 18 blow down and 180 compression is a 14k rippa with 10 pin sprocket.
You must beUA-cam or Google hero. I actually have a Degree in applied science in automotive technology lol. And am master certified auto and diesel mechanic lol! With roughly 150 other certifications in the industry. Including Husqvarna and Stihl.
Saws on the farm is the channel name : link to the 372xp Amazon under $200 to your door saw in da wood cutting… ua-cam.com/video/BtYBZSZQyFc/v-deo.htmlsi=fLLYjwrP0fcfBebO
Trouble in paradise for the 2 amigos fabz and metal and wood cant say i didnt see this coming 😂😂 but i give u props for being honest and not just going along
@@MitchellsBackyardLogging Wes , I’m 56 and THIS is going to be my retirement gig man … I cannot afford not to be as straightforward as I can no matter WHO I’m dealing with. IF the other party wants to buy/sell saws that’s his business but imho ya gotta have the product 100% BEFORE ya bring to market … I’m
Not saying you CANNOT “work” those Hilic carbs - u can micro drill and use JB weld etc etc but I’m not going to monkey around to try and make chicken soup outta chicken shit! Heck I got an OEM HD-12 carb to my door for $70 and I know for a fact it’s going to deliver plenty of fuel and hold the tune! That hilic is all over the map rich , lean - won’t hold tune to MY satisfaction with the mods I’ve done. Perhaps it is FINE for the stock saw as delivered but most guys in the game WANT the snap, crackle ,pop - increased cut speed.
Some hlic work well some do not....mine did not but I have to say the big dint does wonders beter...is it great idk but time will tell....I'm going dukes as I can't afford oem atm....maybe sometime tho
Holy crap!! Are u serious? 700 for a clone 372?
These guys are smoking crack!!! Can import a brand new oe372 for another 100 bucks. These idiots are nuts!!!
🫡
That’s what Metal and Wood charges to for this saw with all the accessories to the best of my knowledge 😮
Nah I've got same saw all stock for 180 bucks off Amazon and use it every day loggen
@@tylercearley7778 a pro mag 372xp 76.5cc ?
That's missing the point of chep saw. 700 no way!!!
I think what people are missing is the cost of use equation with the clone saws. If you pay $700 plus for a complete 372 clone ready to run and cut you may as well buy a New OEM 372xp. The clone will have virtually no resale value used where as the OEM 372 will have some market value simple because it is from Husqvarna. You will pay more up front for the new saw but you will be money ahead if and when you need or want to sell the Husky IMHO.
700$, that's a lot of money for a clone chainsaw, for just the power head.
Is around 1200$ for 572 & 372 xtorx, bar & chain included.
The hnsavrnqua is comparable to a neo or holt.....change out some parts....on Ali it's anywhere we from 125 to 20p depending on which u find...138 shipped to my for from USA CALI
I believe Steve at metal and wood gives the complete saw not just a pho ONlY for that $700 price but it wood be best to ask him direction to know for sure 👍
We personally don't let anything China in our shop period. Jst not worth the hassle. Granted the holzforma clones were the main ones we had come in prior but when we got done the cases and brake handle were the only thing holzforma left. We used OEM crank,bearings,and seals. OEM ignition,carb and intake. OEM oil pump. OEM cylinder kit and muffler. OEM brake,handlebar,and gas tank/rear handle,etc.
Let me TELL YOU SOMETHING BROTHER! OH YEAHHHHH
You was aware of the switch issue and bent dog....that's not worth mentioning being a clone lol
@@brandonf1226 yes Steve did make mention of the missing switch but asked me not to mention the coil and carb. I’m simply NOT jeopardizing my good name to misrepresent someone else’s saw to be something that I know it is not !
Yeah he just posted a video today and was using that 72cc hnsavrqua saw seems it was cutting good for under two hundred, he also had a few other saws to run in the wood as well cool video.
Good stuff
900 wld still be a lil less then a new 572 however what about warranty stuff?
He does offer a warranty of sorts. He's replaced saws and sent people new parts.
Go Farmertec simply because they’re far more refined and affordable. That and it’s not a BB cyl 🤮
@@Houseworksaws it’s not ??? - Says 76.5cc right on the sticker ! Do you know that for a fact??? - I mean I can pull off the cylinder and measure the bore if need be. That would be a REAL kick in the balls IF it’s only 70.6 cc but advertised as 76.5cc …..
The one you have is a BB I’m saying if you buy a FT 372 you can get it in standard bore. I feel you can get more power from the standard bore cyls.
Why would you raise the exhaust lol.
@@steppoffaith8426 to gain rpm (if needed)
@fabzacres-blackcat a saw at 100 exhaust isn't going to turn any more rpms at 104. Especially in the cut 24" wood 24" bar. 104 will hold 12.5 k in the cut where 100 is lucky to get 10k. Now if your cutting a 9 inch cookie. 100 exhaust with 18 blow down and 180 compression is a 14k rippa with 10 pin sprocket.
@@steppoffaith8426 all depends on the saw. I suppose you’re gonna tell me that it’s not an air pump too 😂
You must beUA-cam or Google hero. I actually have a Degree in applied science in automotive technology lol. And am master certified auto and diesel mechanic lol! With roughly 150 other certifications in the industry. Including Husqvarna and Stihl.
@ yah, and what the hell does that have to do with the price of beans 🫘? Y’all better go back and brush up on those old Ironhorse videos😉
Saws on the farm is the channel name : link to the 372xp Amazon under $200 to your door saw in da wood cutting… ua-cam.com/video/BtYBZSZQyFc/v-deo.htmlsi=fLLYjwrP0fcfBebO