Love ya man! Spring,Summer,Winter or Fall!!! I’m in South Eastern Pa... I’d definitely love to let the 6.0 stroke her way North! I’d bring a DirtBoyDave build up to cut a round. I’d love to just hang out and enjoy the stories and gain knowledge from older guys who have this passion too... and lot’s more years and knowledge than me. Camping out and eating some food..,listening to good folks make music and memories together in the woods...talking PowerSaw’s! Boy O’ Boy! Sipping my Iced Tea and doing lots of smiling... I wanna find another machine shop to knock down a 272 piston to play with in my aftermarket bigbore....! My Hutzl 372 has a Sugi 28” skipper on her...LOL! I saved so much on the China Saw I could afford a decent bar!!!LMFAO! I just love the way you are schooling us guys that want to learn everything we can about PowerSaw’s!!! 😁👍. Thank you,Sir!
Hi Harv, I live in SE Pennsylvania. I’d really like to meet up and see your place. Timing is not always on my side having 2 young kids. We’ll see how it goes. Keep us informed.
New sub here Ironhorse🖐 Been watching Buckin and Killinger channels for a little while, and found my way here. Appreciate your explanation of how your building saws, your comment on another video if I remember correctly was to think of it as basically hot rodding a dirt bike helped me understand better. I've never done more than general maintenance type stuff and carb rebuilding on a saw, so thanks for sharing your knowledge👍Will be trying to catch up on some past videos and following new ones👌✌
I would love to take a ride up your way...l live about 2 hours from you and l also an old David Bradley chain saw that was in an old barn that was being tore down on a job that I was logging .....it was completely seized up from sitting for the last 30 40 years....l now have it freed up, cleaned up and about ready to start and it has very good compression .....l don't know anything about the carburetor on that saw .... I was wondering if you ever did anything with one .
Hey Harvey...would love to come up...we are in Southern Missouri and it would be a haul but would shift things around to to come be a part of the Ironhorse saw-a-palooza and run some saws get square filling tips and watch the draft horses pull. Thanks great idea...would be glad to help in anyway I can
@@theironhorse6600 Ah glad to hear your up here with me. For some reason I thought you were ohio or indiana or something hahaha. If I can make it I would be game for a meet up. I have an axe meet at my place on March 28th. You are welcome.
Hey Harvey. Do you remember me with my Partner 660? Could you explain, if it's possible to set up this big bore kit from husky 272 /372 for this partner chainsaw. All so I hope it fits. Thanks
Is it possible to run a single ring on a double ring piston?? Like the lil red barn 50mm pop up double ring on a 371xp stock cylinder with gasket?? Or simply better to go with meteor with gasket delete??
hey ironhorse I'm fellow timber cutter from Murphy North Carolina. Can u put a stock 272 piston in a 372xpw without milling it down. thank ya bud b safe
I tell ya, I think their may be 2 people in this community that live near me. I'm about as far as I can get from you without getting in the Pacific ocean.. 😊👊👍Great video Harvey!!!!
Great advice man, I'm working on my 385, exhuast opens at 96 intake opens at 103 and my blowdown is 36 putting my tranfer duration at 96. Seems low. My question is should I raise the transfers in this case? I'm thinking of 26 blowdown for a 116 transfer duration. What's your thoughts thanks.
@@theironhorse6600 ok thanks for the input, I would have to get the base machined. What I may do is put the meteor piston on the hiway cylinder and see where I'm at. Hopefully it's over 100. Thanks for your time man. I actually lean towards torque in my works saws.
@@mercoldswfo hey man I got my numbers sorted, I'm gonna try that meteor piston and see if it yields better numbers. Then once i get my exhuast and transfer figured i will bug harv for intake numbers lol
September 20th that's my birthday and it's going to be at decals again this year.. I heard pretty clothes is going to be in Michigan and then I heard that supposed to be in Indiana somebody has to make up my mind and I'm not going to come over your house for two days I'm going to stay there for like a week put my little army cot right next to that wood stove at night time I'm a Marine I seen heat I seen cold.lol. thanks for the videos mr. Harvey you're a hell of a man you give us more information than half the people out there from a Michigan boy over and out good day
You're going to have to adopt me, adopt a child.lol I tried calling you last week and on your voicemail was a lady laughing so I thought I had to the wrong number
Hi Mr Harvey, I have been watching you for awhile now and this is my first post, but I would love to come up your way I live here in central PA and I could be there in about 2 hours. Someday I have a saw I would be honored to have you build for me!!!
Hey harvey id come 2 ur event absolutely would i live in knoxville tn i work for myself so time off isn't an issue just need the date to be ther. I appreciate what you do man. I really do.
Hey Harvey would love to get together with you . Central Mass here so not to far a drive . Planning on making it to Bucking stock this year it’s already on the calendar ..
So could you use the 272 piston in the 372 without milling anything off the top of the piston and still be safe with squish? With or without a base gasket? Didnt understand that part. Love the tips and tricks Harvey!! Thank you for sharing with us
Ironhorse Chainsaw that ain’t nothin Harvey ... me 2 black panthers can port and polish a cylinder for a can of tuna fish ! Amazing how they get their little paws in there and take care of business !
What would happen if I take some off the roof of the intake port instead of the floor? Say 0.040” I’d get more intake duration but wouldn’t have it close too late so I’d get nice case pressure is my thinking..
Meteor makes the closest to OEM as possible. Very consistent port timing and great plating and honing practices. Also come with Caber rings to begin with so consider that as an additional savings
@@Chevron.Muskoka I mean my 272xp runs perfect. I am thinking about the swap because I think I would like it to have a decomp which it doesn't have right now.
I got one more question for you if you don't mind me asking, what is ur thoughts on removing the bottom ring on a duel ring piston for a 372? Like what would happen?
Hey what’s going on Harvey I don’t build saws I just love hanging out with ya hahaha have a great day...👍👍👍👍❤️❤️❤️❤️☮️
this video has great lighting wow
That cat was was listening to every thing you were talking about. The leadburn logger Scotland
Love ya man! Spring,Summer,Winter or Fall!!! I’m in South Eastern Pa... I’d definitely love to let the 6.0 stroke her way North! I’d bring a DirtBoyDave build up to cut a round. I’d love to just hang out and enjoy the stories and gain knowledge from older guys who have this passion too... and lot’s more years and knowledge than me. Camping out and eating some food..,listening to good folks make music and memories together in the woods...talking PowerSaw’s! Boy O’ Boy! Sipping my Iced Tea and doing lots of smiling... I wanna find another machine shop to knock down a 272 piston to play with in my aftermarket bigbore....! My Hutzl 372 has a Sugi 28” skipper on her...LOL! I saved so much on the China Saw I could afford a decent bar!!!LMFAO! I just love the way you are schooling us guys that want to learn everything we can about PowerSaw’s!!! 😁👍. Thank you,Sir!
Harvey-stock 2020 ... music ; saws , dirt bikes and lotsa good eats !!! I should have the x27 head hafted to a hickory handle soon
Hi Harv, I live in SE Pennsylvania. I’d really like to meet up and see your place. Timing is not always on my side having 2 young kids. We’ll see how it goes. Keep us informed.
Its 11.5hr from me 2 ur town id make that trip to get to meet u an talk to you absolutely.
Great Information There !!! Thank You For Your Videos !!!
Hello Harv from the Ireland crew, if decide on a date, I'll come over, Eoin P
I used to have arrows like that on my uniform when I worked for the government 😜
Me too Mikey 😉
New sub here Ironhorse🖐 Been watching Buckin and Killinger channels for a little while, and found my way here. Appreciate your explanation of how your building saws, your comment on another video if I remember correctly was to think of it as basically hot rodding a dirt bike helped me understand better. I've never done more than general maintenance type stuff and carb rebuilding on a saw, so thanks for sharing your knowledge👍Will be trying to catch up on some past videos and following new ones👌✌
Welcome to the channel good sir! 👍
@Morgun Freedom - Thank ya very much friend, that's a great username ya have
👍
I would love to take a ride up your way...l live about 2 hours from you and l also an old David Bradley chain saw that was in an old barn that was being tore down on a job that I was logging .....it was completely seized up from sitting for the last 30 40 years....l now have it freed up, cleaned up and about ready to start and it has very good compression .....l don't know anything about the carburetor on that saw .... I was wondering if you ever did anything with one .
hey Harvey can we get an update on the grabber family sometime please.
I'm in for it.be an honor. I'm only hour away. Like to make It to buckinstock.b sure come c u Harvey.you 've done great with the channel.
I WILL be there!
I'm gonna b there come hell or high water. I'm in millport ny.were used to high water.live on Catherine creek.ever want to trout fish look me up.
Hey Harvey...would love to come up...we are in Southern Missouri and it would be a haul but would shift things around to to come be a part of the Ironhorse saw-a-palooza and run some saws get square filling tips and watch the draft horses pull. Thanks great idea...would be glad to help in anyway I can
Same down in Nixa mo
@@codyschofield3686 what you do for a livin
Im in willow springs
David Ray I own professional small engine repair and work at Oakland lubrication on the side so I get all my oil at cost
@@codyschofield3686 next time im in your area ill give you a shout and stop by and check out the shop
Hey Harvey, hows ol Dave holding up? Good stuff buddy, I’m learning a lot from you and your channel!!!
Harv i live in newyork on the pa border matamoras would love to meat you.
Hey Harvey while you're making videos that calico cat is over there inspecting your work on the workbench.
Harvey, sent you an email on Sunday along the lines of getting together haven’t heard back. About 5 hours away would enjoy the drive.
Kevin! I missed it! Please send another!
Sent to you email.
Newer sub here. Where is Ironhorse located?
Canisteo ny and I love the Adirondacks! Used to go to Indian lake every year! And welcome to the channel!
@@theironhorse6600 Ah glad to hear your up here with me. For some reason I thought you were ohio or indiana or something hahaha. If I can make it I would be game for a meet up. I have an axe meet at my place on March 28th. You are welcome.
@@theironhorse6600 I am in Ballston Lake by the way.
@@theironhorse6600 do u still log?
Hey Harvey. Do you remember me with my Partner 660? Could you explain, if it's possible to set up this big bore kit from husky 272 /372 for this partner chainsaw. All so I hope it fits. Thanks
You know I'll be there Harvey!! Great video bud.
Meteor kit is good for 372xp ? is 1 ring.
Lol I love it
? Can any 2 ring piston,just run 1 ring.
Yes! But I would only do it with a new cylinder! Top ring only! No Bottom!
Is it possible to run a single ring on a double ring piston?? Like the lil red barn 50mm pop up double ring on a 371xp stock cylinder with gasket?? Or simply better to go with meteor with gasket delete??
I haven’t had luck with the red barn stuff! I recommend the hyway brand the most! And you can run just the top ring!
thanks for video. lots of good tips thanks!
Yes Sir , I would go . I live in N.E. Ohio . DO IT !
hey ironhorse I'm fellow timber cutter from Murphy North Carolina. Can u put a stock 272 piston in a 372xpw without milling it down. thank ya bud b safe
Nope! Gotta be milled!
@@theironhorse6600 OK to the same height as 372xpw
I tell ya, I think their may be 2 people in this community that live near me. I'm about as far as I can get from you without getting in the Pacific ocean.. 😊👊👍Great video Harvey!!!!
I’m excited to see some 61 action it’s gonna be awesome 👍
Hello, I'm from Serbia. I have a question? What do you think about combining a Hyway big bore cylinder 372 with a Wiseco piston?
Great advice man, I'm working on my 385, exhuast opens at 96 intake opens at 103 and my blowdown is 36 putting my tranfer duration at 96. Seems low. My question is should I raise the transfers in this case? I'm thinking of 26 blowdown for a 116 transfer duration. What's your thoughts thanks.
I would go to100 on exhaust and 120 on the transfers on that saw! It will have much more power!
@@theironhorse6600 ok thanks for the input, I would have to get the base machined. What I may do is put the meteor piston on the hiway cylinder and see where I'm at. Hopefully it's over 100. Thanks for your time man. I actually lean towards torque in my works saws.
Poplar Mechanic 👋 👨🔧
@@mercoldswfo hey man I got my numbers sorted, I'm gonna try that meteor piston and see if it yields better numbers. Then once i get my exhuast and transfer figured i will bug harv for intake numbers lol
Poplar Mechanic yeah exhaust makes sense to me. Intake and transfers are a guessing game for me yet
September 20th that's my birthday and it's going to be at decals again this year.. I heard pretty clothes is going to be in Michigan and then I heard that supposed to be in Indiana somebody has to make up my mind and I'm not going to come over your house for two days I'm going to stay there for like a week put my little army cot right next to that wood stove at night time I'm a Marine I seen heat I seen cold.lol. thanks for the videos mr. Harvey you're a hell of a man you give us more information than half the people out there from a Michigan boy over and out good day
Buckinstock is very close to elkheart Indiana! And we’ll get you out here by the fire!
You're going to have to adopt me, adopt a child.lol I tried calling you last week and on your voicemail was a lady laughing so I thought I had to the wrong number
Harvey-stock sounds like fun, I think we're pretty close-ish. Would make the trip, life permitting...
Hi Mr Harvey, I have been watching you for awhile now and this is my first post, but I would love to
come up your way I live here in central PA and I could be there in about 2 hours.
Someday I have a saw I would be honored to have you build for me!!!
Hey Harvey, not sure where your located but I'm from western Pa and would travel 3-4 hours in a heartbeat! Keep up the great content.
Hey harvey id come 2 ur event absolutely would i live in knoxville tn i work for myself so time off isn't an issue just need the date to be ther. I appreciate what you do man. I really do.
Hey Harvey would love to get together with you . Central Mass here so not to far a drive . Planning on making it to Bucking stock this year it’s already on the calendar ..
So could you use the 272 piston in the 372 without milling anything off the top of the piston and still be safe with squish? With or without a base gasket? Didnt understand that part. Love the tips and tricks Harvey!! Thank you for sharing with us
Ya need to mill some off the 272 Piston!
Thank you for the reply! Also was wondering what size pipe you used on your tube mufflers you built for the 372's if you cared to share
I’m not sure! I’ll measure it and get back to you!
I live 3 hrs SE of you in pa. I'd be willing to take a drive. Love the channel. New sub.
All i know is you live in new york but not where .i live in southern new Hampshire so maybee do able.
Harvey is in canisteo NY. It's a haul from NH but certainly would be worth it.
@@eriknelson6529 ok thanks erik .
what r you thinking the cat is on the bench lol ///A 272 with a bit of work be a good saw
Yea! Those calicos are real good at research and development! HaHa!
Ironhorse Chainsaw that ain’t nothin Harvey ... me 2 black panthers can port and polish a cylinder for a can of tuna fish ! Amazing how they get their little paws in there and take care of business !
I'll be there, depending on schedule!
I could show off my new S-25DA hotsaw? ;)
Sounds like fun let's make this happen !!!!!!!🌭🌭🌭🌭🌭🍔🍔🍔🍔
sorry im late iron horse i make sure i watch your vid right off the bat you and bucking keep up the great work
how would I go about getting in contact with you to discuss having some work done on saw or two (if you are interested)
Ironhorsechainsaw@gmail.com
Thanks
I would like to come up to your place. I'm in Pennsylvania
sounds good Mr. Harvey I'm sure you will get a lot of responces
Great video man always like to hear more info. i would try to to make it where do you live state i'm in MA but can't drive do to some heath stuff .
and how much for piston already done with rings from you bud
I really appreciate all the info an stories. An doing that for our buddy Buckin is mighty nice. Im sure you always give us your best.. THX
Sure that will be great I'll start saving my hilton points..The 394 big bore is going out for a run today.
What would happen if I take some off the roof of the intake port instead of the floor? Say 0.040” I’d get more intake duration but wouldn’t have it close too late so I’d get nice case pressure is my thinking..
Generally not a good idears
I’m all in for your doings. I would like to meet you in person.
I would love to come hang out for a meet n greet at your farm. Your not that far from Maine lol. That would be very cool.
Intake side is the coolest side on a 2 stroke. usually why the pins are there.
I'm from New York would be a good idea.
Ya upstate New York get together 👍👍👍👍👍
THANKS FOR THE TIPS IRONHORSE I LOVE INFO KNOWLEDGE OF ALL THIS IS GREAT THANKS BUDDY LOOKING FORWARD TO ALL YOUR FUTURE BUILDS
Great vids you keep it real and explain things in pretty simple terms love the vids keep up the good work be well my friend
I would be up for a meet up in NY.
I think it would be great to have a get together
Ironstock 2020!
Hahahahaha
Great tips! Thanks 👍👍👍👍👍👍👍👍
Id be interested in Ironstock.
😊😊😊👍👍 cool
great info thanks harv
Great video Harvey and love the meet and greet idea
Thanks harv , great info
Thank you for all the insight
Im on the other side of the world and i feel like droping by
Where are you at?
@@theironhorse6600 australia. .
That's awesome! Hello vtec
Hi my name if anyone wondering is fazza
Nice to meet you.
Upstate ny we’re that’s we’re i am
I’m in canisteo! Where are you?
Ironhorse Chainsaw I might make a trip west to visit. I'm in NH. Course I'd bring the ATC 250r to scare everyone😜
Catskill ny Harvey
Very cool mate
October
1st😬❤️👍
MIKEY YOYO it’s late lol
7am here Nick 😳
MIKEY YOYO 2:15am here and got to be rolling at 7 love it. Cheers friend
Journey North journey I love Alaska. I have some ham radio friends in anchorage. Cheers
Thanks iron horse for your videos they very good and you are very good teacher thanks
ok mill to same height as 372xpw
What do you think of the Meteor Cylinders? Got one in my cart at Wolfcreek for my 272xp.
Meteor makes the closest to OEM as possible. Very consistent port timing and great plating and honing practices. Also come with Caber rings to begin with so consider that as an additional savings
@@Chevron.Muskoka I mean my 272xp runs perfect. I am thinking about the swap because I think I would like it to have a decomp which it doesn't have right now.
That would be your best way into it. If I remember correctly meteor offers a kit complete with a new decomp valve
@@Chevron.Muskoka Last question. Is it possible to port a cylinder without the saw it goes to being present or is that reckless?
In my opinion no. I do not do that, others may but that's a different market and program.
How far from N.C. are you?
Im in canisteo ny! 6 hrs?
@@theironhorse6600 oh ok awesome! That is almost half the time it would take me to get to Indiana lol which is love to be able to do
I just looked, it's 10 1/2 hours away and Indiana is 11 1/2 lol but it would still be fun lol
I got one more question for you if you don't mind me asking, what is ur thoughts on removing the bottom ring on a duel ring piston for a 372? Like what would happen?
👍
Great video. Gonna make it to Buckin stock, would love to come your way sometime. 👍✊
Harvey love all the knowledge you share with us. It’s so worthy to get free knowledge keep on keeping on