Carbonk shirts with crucial creations crew logo on it would be awesome merch I'd definitely buy thank guys for another great video hope you guys had great holiday break keep up the hard work!
Stick some coppers in there gapped to .017-.020 and it'll be crisp with a bigger spark surface area, same heat range as the iridiums. Cheaper than iridiums and you shouldn't gap iridiums cause you'll damage the electrodes...
hey mike, love the videos. im turboing my k24 tsx and im unable to find cooler plugs for my motor, all the parts shops and suppliers only have 6 and 7 temp. do you know what brands and part numbers are 8 or 9. and do k20 plugs work in k24 as well? stock motor and looking at 8psi. any advice ? cheers.
People have problems running iridiums all the time. The do not last as long. iridium dose not dissipate Heat very well at all. Found Ngk copper plugs to work the best.
The dumbest thing wrong with my car it's brilliantly practical and economic. Having been inspired for some fun by your channel I found myself on lunch looking at the car I always wanted but was too new and expensive for me at that time: early 2000s Honda Civic Type R (running it 45 miles a day now would still be a lot). I was to justifying it to myself as "It's fine, I'm only looking" with a colleague looking over my shoulder telling me about how much fun his big turbo'd Fiesta ST is on the B roads I drive to work on....
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
Diymike and Chris, like the new personable up close down to earth filming style you guys started doin since the welding video. 👌🏻
Thanks for sharing, always like learning about these little engines!
You guys fixed it now it’s ready for anything!
Awesome video. Good instructional work!!
Take it to PFI for tuneing that would be a dope video 👍❤️❤️👍👍😜🤓💀🤔😛😃😀😘
Maria Saavedra Brent would have this car running low 9’s
blkeftch _ I agree Brent no what he doing it would be a dope video to see
You have the same lift, compressor and craftsman tools as me. You know what good tools are.
Mike saves the damn day for the b day boiiii. Ps Jan birth days are the best. Not biased
Carbonk shirts with crucial creations crew logo on it would be awesome merch I'd definitely buy thank guys for another great video hope you guys had great holiday break keep up the hard work!
will look into it bro!
i don't have a car but still i like watching your videos. keep it up from PH
Mikes the man!!
Dudes beard looks so much better trimmed up. I need to trim mine a bit now.
you guys should check v-tec solenoid screen if its clogged it will not engage properly
Magic mike FTW
Rip to that handshake at the end 😂 still love y’all tho
I have a mostly stock 09 Honda Accord and my problem is that it's not fast like your cars
I dint know bout the heat number of the spark plugs ..
lmao that hoodie bro! Asian Squat Social Club. I think I need one.
Stick some coppers in there gapped to .017-.020 and it'll be crisp with a bigger spark surface area, same heat range as the iridiums. Cheaper than iridiums and you shouldn't gap iridiums cause you'll damage the electrodes...
What’s with the red CRX in the garage?
During the Holidays, Carlos needs pointy ears.
Nice
hey mike, love the videos. im turboing my k24 tsx and im unable to find cooler plugs for my motor, all the parts shops and suppliers only have 6 and 7 temp. do you know what brands and part numbers are 8 or 9. and do k20 plugs work in k24 as well? stock motor and looking at 8psi. any advice ? cheers.
nebulae1992 you can run copper, just gap then closer. I think 7 heat range is the coldest you can get on copper
Did they ever get this fixed completely
Link to that xcessive center feed intake manifold 💪😁
USE COOPER CORE NGK PLUG!!! Or try might help also iridium your not supposed to gap them
👊👊👊
People have problems running iridiums all the time. The do not last as long. iridium dose not dissipate Heat very well at all. Found Ngk copper plugs to work the best.
More videos pleAse
Check the coil plugs
Yo bro my car has some hesitation like when I’m like slowly gassing it I texted you on Instagram idk if you can help ?
Static Mike
spark plugs bruh... check your gaps too.. for that misfire and check your grounds. maybe not enough grounds
boost leak?
In the sylinoid
Magic mike make us more videos ❤️👍👍👍👍👍👍😃😜💀🤗🤓👿😎🏎🏎🏎
Check your vtech screen
Carlos said bunghole 😂😂
Travis Dunn hahaha. It is the technically the bunghole 😂😂😂
I run 4644 plugs non iridium in my K runs perfect?
lots of people can run copper plugs no problem. but from factory they come with iridium plugs, they last longer.
@@diymike oh of course thats true but i sputtered top end with iridiums put copper and im running good 10.2 on 540hp lol
By the way idk what part of Florida you guys are from but you guys got some pretty ass beaches🌴
Michael K. Lee they’re not from Florida. Las Vegas
@@davidgoodrich1258 AH, my mistake! 😅
What is the dumbest thing wrong with your car, that caused a huge problem???
Diymike Bad grounds..
My buddy putting a brake pad in backwards... last time I didn't double check other peoples work that's for sure
The dumbest thing wrong with my car it's brilliantly practical and economic. Having been inspired for some fun by your channel I found myself on lunch looking at the car I always wanted but was too new and expensive for me at that time: early 2000s Honda Civic Type R (running it 45 miles a day now would still be a lot). I was to justifying it to myself as "It's fine, I'm only looking" with a colleague looking over my shoulder telling me about how much fun his big turbo'd Fiesta ST is on the B roads I drive to work on....
Metal shavings got magnetized into sensors that throw off readings...
@@miatadna7396 HOW HAHAHA, like the metal backing of the pad on the rotor???
Felt like I was watching a kung fu movie way the sound was off for a while
36mm for k series
Why isn't he working on his new 🍍?
Guido anchovy
I think he means 3 10's because they randomly vanish on their own.
Yurd
What the hell is the asian squat social club
E Honda squatting Asians smoking..
Looks like he needs some beard oil it’s looking a little dry there
Iridiums are junk! NGK copper for life.