Tip bro ; When in the field , try using ash from your fire mixed with water to make a paste to clean your stones ( works awesome on ceramics) I just rub it with my fingers hard and rinse it off. I totally love the new DS2 also. Bought a couple already.Pete
That can beat the shit out of that edge. I'm a bit discouraged here. I just bought the Manix 2 in S110V and Maxamet. Reconsidering keeping the S110V instead?
As soon as ya started on that can o beans I knew you'd might have to eat some maxamet chips with it! Cpm m4 is about as high as I'd go for hard use, but it takes it like a champ. M4 is a "fickle mistress" tho, all having to do with getting that edge right with that tough carbide formation.
M4 is my favorite as well. I don't mind the lack of corrosion resistance and it seems to hold an edge without taking damage as well or better than any other steels out there for what I do. I don't have any experience with Maxamet or the newer steels to come after S110V and such though. I figure if it ain't broke I won't fix it though. M4 is my steel I suppose.
Was this the factory edge that chipped, or have you passed three or four custom sharpenings first? It's typical for chippings early on in most highed end steels that I have noticed. Then they kind of settle in.
Just found you channel and subscribed. The exact same thing happened to my Manix with Maxamet blade when opening a can. The chipping didn't occur until I started turning the blade to follow the curvature of the can. Did you also hear that ominous cracking when turning the blade? lol It actually did absolutely no damage when I cut the metal along a straight line. Also, sharpening didn't seem to be that big of a deal for me either.
Simon's Discoveries nice, I've been your subscriber for a while haha. Interesting, I never thought of the twisting. It held up like a champ on everything else. Yeah the Sharpening difficulty is overblown.
Oh, nice :) Have we talked on UA-cam before? Sorry, I can't remember. I think that if I really needed to cut metal with this knife, all I'd need to do is round off the edge to increase the angle and stability. I have a feeling it'd cut metal like a champ. But then, its cutting efficiency would most likely drop dramatically when used on most other materials that we actually cut everyday.
I've had my maxamet para 2 for about a month now.... I wish I went with s30v. I'm not saying that s30v is better, but if you live near the beach, maxamet requires way to much maintenance. The oil seems to rub off on one side in my pocket, and if I dont oil daily it will rust. But I still love this knife
These Chips are no fun to get out. Do you think the steel is too brittle or would the damage be similar in a manix with s30v or cts xhp? Im just curious. :) Nice field sharpening demonstration. I think a Dmt double stone came in handy aswell.
MrWeedpeet haha it only chips if you use it as a can opener, 8cr13mov makes a better can opener but Maxamet will destroy it at everything else. Seems we can't have it all. I'll take Maxamet since I can sharpen and I keep user error to a minimum
I know you love those Spyderco's Sean or Shawn (sorry I do not know proper spelling) so I am wondering if you have an order in for that Manix2 in M4? M4 seems to be the craze as of late. I see it coming out with all major knife producer's and with good reason, holds an awesome edge! I've got several of those many M4's out there to include a couple BRK's. I think I see a new alter-ego for you...Maximetman!
Nate Brabant the DLC version looks radical. I currently have more then enough M4 in my collection. I love my jade g10 Millie, wish I got the free square head too though. Hahaha that's hilarious MaxametMan lmao
Great video! Finally someone who exposes his blade to real world conditions! Need your advice BBB. Manix 2 LW Maxamet or Shaman S30V? I know you are a steel expert and Maxamet is a "harder" steel but just wondering what your take is. Thank you!
Murray carters neck knives are truly amazing. Idk why I'm saying that here but it's so thin sharpen it in a king 1k and 6k maybe at about 5 degrees per side edge doesn't roll can still chop or carve wood. And I just try comfortably Dry shave with it. Unbelievable
I was just reading your posts over on thespyderco forums asking If max is dead lol I sure hope not because the prices are going to skyrocket and I only own a native in maxamet currently with Hope's of a para 3 in future...
How have your thoughts changed about Spyderco's Maxamet over the years? Was the release of this steel one of the main influences on your pursuit of making high end knives with the highest wear resistance possible? Like, is this was led you to pursue REX 121, 15V, and the like?
Scott Light I got really really lucky, bud. This guy happened to get on board as soon as they were released, bought a couple, and ended up selling me one. I hope to get a review up on it soon.
I carry a DMT Diafold in coarse/fine, and, an X-fine/XX-fine for fixing problem edges away from home. If I need to fix an edge problem those can't handle, it's probably time to get a new knife, anyway. :)
Great video, really enjoyed the can test. I wish more youtubers would push the envelope of what real edc and camping knives are subjected too. If it was your only knife you might have to open a hundred cans with it then stab a bear. Shit happens.
This is a great example that shows where the limits of Maxamet are. Fantastic for normal EDC use, but not really for hard use or abuse.
Well Shawn or is it Sean I for one appreciate it you have helped me with many decisions and they were all to the good . So thanks again
Tip bro ; When in the field , try using ash from your fire mixed with water to make a paste to clean your stones ( works awesome on ceramics) I just rub it with my fingers hard and rinse it off. I totally love the new DS2 also. Bought a couple already.Pete
hiwa thanks man, badass tip bro. I also got the DS2 Jesus it it's Maxamet for breakfast.
Do more spyderco videos dude.
I like 🤣
Man those chips would happen w any knife I got some in a cold steel d2 from cutting a can
That can beat the shit out of that edge. I'm a bit discouraged here. I just bought the Manix 2 in S110V and Maxamet. Reconsidering keeping the S110V instead?
Thanks BBG now I have to have a knife with a maxamet blade .
As soon as ya started on that can o beans I knew you'd might have to eat some maxamet chips with it! Cpm m4 is about as high as I'd go for hard use, but it takes it like a champ. M4 is a "fickle mistress" tho, all having to do with getting that edge right with that tough carbide formation.
M4 is my favorite as well. I don't mind the lack of corrosion resistance and it seems to hold an edge without taking damage as well or better than any other steels out there for what I do. I don't have any experience with Maxamet or the newer steels to come after S110V and such though.
I figure if it ain't broke I won't fix it though. M4 is my steel I suppose.
Was this the factory edge that chipped, or have you passed three or four custom sharpenings first? It's typical for chippings early on in most highed end steels that I have noticed. Then they kind of settle in.
Yup that burnt edge ...once its gone the we good
Just found you channel and subscribed.
The exact same thing happened to my Manix with Maxamet blade when opening a can. The chipping didn't occur until I started turning the blade to follow the curvature of the can. Did you also hear that ominous cracking when turning the blade? lol
It actually did absolutely no damage when I cut the metal along a straight line. Also, sharpening didn't seem to be that big of a deal for me either.
Simon's Discoveries nice, I've been your subscriber for a while haha. Interesting, I never thought of the twisting. It held up like a champ on everything else. Yeah the Sharpening difficulty is overblown.
Oh, nice :) Have we talked on UA-cam before? Sorry, I can't remember. I think that if I really needed to cut metal with this knife, all I'd need to do is round off the edge to increase the angle and stability. I have a feeling it'd cut metal like a champ. But then, its cutting efficiency would most likely drop dramatically when used on most other materials that we actually cut everyday.
Simon's Discoveries I agree, of course . Cutting metal is just silly haha
I've had my maxamet para 2 for about a month now.... I wish I went with s30v.
I'm not saying that s30v is better, but if you live near the beach, maxamet requires way to much maintenance. The oil seems to rub off on one side in my pocket, and if I dont oil daily it will rust. But I still love this knife
Try forcing a patina. The patina helps create a surface that holds oil better. You could also go for an aftermarket coating like cerakote.
These Chips are no fun to get out. Do you think the steel is too brittle or would the damage be similar in a manix with s30v or cts xhp? Im just curious. :) Nice field sharpening demonstration. I think a Dmt double stone came in handy aswell.
MrWeedpeet haha it only chips if you use it as a can opener, 8cr13mov makes a better can opener but Maxamet will destroy it at everything else. Seems we can't have it all. I'll take Maxamet since I can sharpen and I keep user error to a minimum
Big Brown Guy that is true :) looking forward to your opinion on the cbn double stuff :)
MrWeedpeet thanks bro
I know you love those Spyderco's Sean or Shawn (sorry I do not know proper spelling) so I am wondering if you have an order in for that Manix2 in M4? M4 seems to be the craze as of late. I see it coming out with all major knife producer's and with good reason, holds an awesome edge! I've got several of those many M4's out there to include a couple BRK's. I think I see a new alter-ego for you...Maximetman!
Nate Brabant the DLC version looks radical. I currently have more then enough M4 in my collection. I love my jade g10 Millie, wish I got the free square head too though. Hahaha that's hilarious MaxametMan lmao
Even Knives need a superhero!
Nate Brabant hahahha
Since it was the bean can that stumped you, I hope it was at least a Bush's! That alone would have lessened the sadness!
Nate Brabant That was the only reason to risk it all was to get to that bush bean goodness
So you raised the angle to get the chips out quicker. Then you where going to go back to the original angle till the micro bevel was removed?
Sour exactly
Really interesting never seen that technique before. Thanks for Showing that
Great video! Finally someone who exposes his blade to real world conditions! Need your advice BBB. Manix 2 LW Maxamet or Shaman S30V? I know you are a steel expert and Maxamet is a "harder" steel but just wondering what your take is. Thank you!
New double stuff is going to have CBN instead of the brown ceramic...FTW!
GPKNIVES Haha I actually called a few days ago to see if you guys had them in stock.
Haven't dropped yet but when they do we'll have 'em.
Got mine in the mail today, it's got some weight to it. Makes a very toothy edge with the fresh coated CBN. I'll have to use it more before a vid
push it to the limit! walk along the razor's edge
Majoras hahahha "like a bat outta hell you smash the gates!"
Murray carters neck knives are truly amazing. Idk why I'm saying that here but it's so thin sharpen it in a king 1k and 6k maybe at about 5 degrees per side edge doesn't roll can still chop or carve wood. And I just try comfortably Dry shave with it. Unbelievable
Maybe 16 inclusive
Sour it's some good stuff man
I was just reading your posts over on thespyderco forums asking If max is dead lol I sure hope not because the prices are going to skyrocket and I only own a native in maxamet currently with Hope's of a para 3 in future...
Yea, its too bad, looks like it got mothballed.
@@FearNoSteel I sure hope not lol
That is very impressive but I would need to be in dire straights to use my knife to open a can .
FlamQ Dbltap lol
butch thompson Yea I wouldn't use a knife to do that, but I'm forced to show you all what the capabilities are.
That would be two good reasons .
I wanna see this channel take off
How have your thoughts changed about Spyderco's Maxamet over the years?
Was the release of this steel one of the main influences on your pursuit of making high end knives with the highest wear resistance possible? Like, is this was led you to pursue REX 121, 15V, and the like?
Hey man, would you be interested in reviewing my Paramilitary 2 in Maxamet?
How did you get your hands on a pm2 in maxamet?
Scott Light I got really really lucky, bud. This guy happened to get on board as soon as they were released, bought a couple, and ended up selling me one. I hope to get a review up on it soon.
I carry a DMT Diafold in coarse/fine, and, an X-fine/XX-fine for fixing problem edges away from home. If I need to fix an edge problem those can't handle, it's probably time to get a new knife, anyway. :)
Mike Uman it's always time for a new knife hahaha
lol! Amen to that!
Dc4 or double stuff?
Sour hrmmm, double stuff. No great reason
Spyderco has this knife for 360 dollars .you should hire a made
Hell what? You’ve got no decent can opener? I’d never do it even with a 10 times cheaper knife. This is like eating soup with a fork.
Whoosh.
Great video, really enjoyed the can test. I wish more youtubers would push the envelope of what real edc and camping knives are subjected too. If it was your only knife you might have to open a hundred cans with it then stab a bear. Shit happens.
An eraser will help get the load up off the ceramic
hell yea