Good stuff bro. I just ordered a pm2 with maxamet, and your tests are putting me at ease. Everyone saying maxamet chips like crazy. Thanks for the videos
Woah. Maxamet is a beast. More and more interested in this steel but I'll have to get some diamond first. I usually lever the spine of the first inch of the blade against the zip tie and essentially push cut through the other site. Those twist cuts had me on the edge of my seat!
I use mostly a King double sided water stone or the Spyderco Sharpmaker (mostly for touch ups). I've been tempted by those Russian Diamond water stones you've got. That or the new CBN Double Stuff.
Nice video. I cut plastic banding that holds lumber together with a Maxamet native 5. If your ever in a Home Depot go to the lumber department and try your Maxamet on the green plastic bands. It makes those zip ties look like child's play lol. Maxamet vs S110v would make a great video!!🍻😁👍
people who are saying stuff about maxamet dont know jack. it cuts everything and well. you should cut some speaker cables etc. some folks have issues sharpening it cause they are sharpening it wrong (tho there is a possibility of heat treatment issues, but i dont have any issues with my mule). getting a PM2 eventually. dunno how long ill wait to get one.
Tactical Center forgot about cutting wires, nice. Yeah I think the problems a few have been having were with the Manix 2. Maybe a bad batch got through? Idk.
Zip-Tie version of "Lucille". More Maxamet Abuse! LOL. Try cutting a tire in half ;-p I don't know why I like watching knife abuse tests so much. Probably because it isn't mine.
I used to work at a farm and anytime I knew we were have a lot of cutting tasks I used CPM M4 and it was always impressive to me and other onlookers hahaha
If people are saying that their knives are chipping with the zip ties then there exists this possibility: They may be using the Worksharp sharpener. That thing is not really made for a steel like Maxamet. Perhaps they are grinding so hard with those belts that they are overheating the edge.
Good stuff bro. I just ordered a pm2 with maxamet, and your tests are putting me at ease. Everyone saying maxamet chips like crazy. Thanks for the videos
Woah. Maxamet is a beast. More and more interested in this steel but I'll have to get some diamond first. I usually lever the spine of the first inch of the blade against the zip tie and essentially push cut through the other site. Those twist cuts had me on the edge of my seat!
GPKNIVES diamond? What stones do You have? Yes I had no idea if it would break my knife or pass haha I was nervous
I use mostly a King double sided water stone or the Spyderco Sharpmaker (mostly for touch ups). I've been tempted by those Russian Diamond water stones you've got. That or the new CBN Double Stuff.
Nice video. I cut plastic banding that holds lumber together with a Maxamet native 5. If your ever in a Home Depot go to the lumber department and try your Maxamet on the green plastic bands. It makes those zip ties look like child's play lol. Maxamet vs S110v would make a great video!!🍻😁👍
Sadistically Sharp haha we'll see 😂
This is like full on science and stuff. Love it. 👍
That Maxamet is awesome stuff! I love these videos that you, your channel is really cool I'm glad I subbed.
Thanks for all the information....
A Ray hell yeah bruddah, stay here for all the knife geek shit hahaha
Great test! I was cringing a little bit when you cut the big zip ties haha.
Loris Buschor hahahha me too man. I didn't know what was going to happen.
Awesomeness! Thank you for sharing.
I like the sound of the zip tie being cut off for some reason lol
people who are saying stuff about maxamet dont know jack. it cuts everything and well. you should cut some speaker cables etc.
some folks have issues sharpening it cause they are sharpening it wrong (tho there is a possibility of heat treatment issues, but i dont have any issues with my mule). getting a PM2 eventually. dunno how long ill wait to get one.
Tactical Center forgot about cutting wires, nice. Yeah I think the problems a few have been having were with the Manix 2. Maybe a bad batch got through? Idk.
Zip-Tie version of "Lucille".
More Maxamet Abuse! LOL. Try cutting a tire in half ;-p
I don't know why I like watching knife abuse tests so much. Probably because it isn't mine.
cryptocognomen that reference almost went above my head, but I got it hahaha
I used to work at a farm and anytime I knew we were have a lot of cutting tasks I used CPM M4 and it was always impressive to me and other onlookers hahaha
I cut thousands of zip ties tho!!
If people are saying that their knives are chipping with the zip ties then there exists this possibility: They may be using the Worksharp sharpener. That thing is not really made for a steel like Maxamet. Perhaps they are grinding so hard with those belts that they are overheating the edge.
Is it possible to hire you to sharpen knives? Your sharpening is insane man
Nice.
👍😎👍
Myth busting steels! I can’t wait till I can buy me a pm2 in this stuff!
crf450r bullet david there will be more haha
crf450r bullet david gp knives .com has them in stock I just ordered one
Another awesome test brother mine should be coming back from spyderco soon I’ll let you know the outcome
Stassa23 that's awesome, I'm stoked to find out.