Building the Most Legendary Mach 1 Ever
Вставка
- Опубліковано 22 лип 2024
- ➥ Subscribe for more: bit.ly/2jH1GkM
➥ Consider my detail-product brand: pattersoncarcare.com/
➥ MERCH: goo.gl/CFuoFx
➥ INSTAGRAM: bit.ly/2BiKifB
➥ TWITTER: bit.ly/37AN8IZ
➥TWITCH: bit.ly/3ebaOpV
➥ SECOND channel: goo.gl/NtQcxJ
➥ Private TDIB Discord: / thatdudeinblue
The 2021 Mustang Mach 1 is coming soon. With this in mind my buddy Garrett invited me to drive his new edge Mustang Mach 1 once again. However this time it is terminator swapped with an amazing story behind it. We go for a drive, tell the story, and talk about what makes this car in particular so special. Thanks for watching and new uploads every Tuesday,Thursday, and Saturday!
#mustang #mach1 #terminator - Авто та транспорт
RIP sir. My good buddy died in a mustang 15 years ago right after we graduated high school. He was the biggest mustang fanboy and a GREAT mechanic.
Sorry for your loss bro
Sometimes it’s not about the smiles per gallon but the memories per gallon
Or tires per gallon lol
So upset he didn’t put in when he shouted TERMINATED YOUR EARDRUMS
My favorite line to this day
I can't wait to see one of those SN95s with a 2020 GT500 engine swap
Can't wait to so one of those or *Can't wait to see one of those?*
6RIE my bad bro lol
A_H22A it's good lol
A_H22A But to be honest it would be DOPE to see a 2020 GT500 swapped SN95
6RIE for sure bro
Something about the Termi looks that just make it so damn good!
Damn that Mach 1 looks so good with the cobra bumpers and spoiler.
Such a classic swap that’s still as relevant and badass as ever! Crazy to think the New Edge Mustangs are “Modern Classics,” now!
Great story behind the car, and thanks for telling it in such a great way.
People can say what they want, but to me, the new edge mustangs will never get old
The one person that disliked, owns a f-body camaro
Those cars are ugly as fuck stock but can look mean as fuck with the right wheel/tire and suspension set up
@@petrolhead8851 fitmentindustries.com
Nah, they’re rocking grandmas old Camry with an AutoZone “performance” muffler and underglow that they have to plug into the cigarette lighter 🥴
Hey now, I upvoted it and have an f-body camaro 😂
Everyone who likes the video owns a 4 cylinder foxbody with 5.0 badges.
I love when a build has sentimental value put into them
I see Terminator, I click, I like, I watch. I'm taking possession of my first Terminator in just a few days, I cant wait!!
Awesome! Welcome to the club!
@@TheBlackDeath3 Thank you, looking forward to making a lot of content with it once it shows up in the next few days.
I see Terminator, I click, I like, I watch, I touch myself.
@@BrandonCockridge18 That's common as well
Lethal Venom hell yeah bro 🙏🏽
I have an 04 azure blue mach 1, and I'll be coyote swapping it next year, would love to have your drive it when its done!
got an 03 ab mach and ive been thinking the same man
@@freestuffgood im going to document the whole build if you want something to follow, but it won't be until late next year, gotta get a my shop sorted with everything I need first
Dane Gietka imma be watching that but I don’t plan on doing a swap, good luck with it though
@@10181995hamza thanks man I truly appreciate it! I'll be pumping out videos leading up to it!
Dane Gietka gave you a follow existed to see your build
May I draw your attention to 3:15
The number plate/The TAG!!!!
*MACH-JUAN
A subtle touch☑️
Heartfelt but awesome story 🙏🏾. That’s one of the first videos I saw from you because I own a Mach. Glad to see they didn’t give up and he will always be with them🙏🏾💪🏽💪🏽 RIP
My condolences to your friend and their family... Also that car is just perfect i love it
As a girl who’s obsessed with V8s, your channel never fails to put a huge smile on my face 😄
What about v6s?
KirkHammettsWahPedal I appreciate there are plenty of other awesome engines out there, and maybe one day I’ll be able to own something exotic with a V12, but nothing does it for me quite like a V8 😄 I’ve got 3 cars and they’re all V8s and as I live in the UK that’s pretty rare!
@@NeoNeko99 I share your exact sentiment. I also own 3 vehicles with a v8 (Ford Expedition and 2 Mustangs). I'm sure you've heard the addage: "Life's too short to drive boring cars."
@@tommy_1629 sorry bud she don’t like your v6 camaro
What do you drive?
Rip brandon, drive in peace 🙏🖤
I respect that brother. Thank you for sharing. For what it's worth I watched that first mach 1 video numerous times till I was able to buy my own.
That’s a well done Mach 1. It’s the perfect mix of terminator and Mach 1 parts. Beautiful car.
2v and 4v are one of the best sounding motors ever hands down
Yep. No doubt!!
Hands up
My 351C and my vr6 disagrees
No 3v's?
This video hit home to me because I just lost one of my best friends in a head on collision with a semi a week ago.
Sorry for your loss, brother. Stay strong and keep your friends and family close.
What a great guy and such an homage to his dear friend🌅🙏💙 This is what life and friendship is all about! I feel downright honored to have heard and seen this. Blessings to all of you and may he be in peace🙏
I remember that 2014 review, awesome that he’s still got the same car!
Beautiful build!!! I so remember this car and older review from back then. Wow what a difference. Great review 🔥👌🔥👌
This man is the only guy I know to blow up four valves v8 mustangs besides wrecking them
those engines were time bombs but it usually takes boost or low oil to ruin them
@@mcf3778 what makes them time bombs? If they're cared for, they seem to last forever. LMR has a dyno video of a '99 Cobra with 268,000 miles on it, still making 290hp. Thats impressive, to say the least.
I think the 03/4 cobra/termi spoiler gives a lowered look as well as accentuates the rear quarter panels giving a widebody look. Add a front bumper of the same year, an aftermarket ram air/cowl hood, coilovers and staggered wheels and done.
This honestly makes me want to get into a new edge mustang so much more
What an awesome story and an awesome build as well.👌🏽
I've always loved the shaker hood on these.. Perfect touch for the new edge
I just got a red mach on Thursday. 32k miles.
Fantastic
@jeffrey edinger only thing I know for sure are suspension mods. Im kind of finding new things as I play around with it
@jeffrey edinger how does a harmonic balancer fail? Did it just break in half?
@jeffrey edinger wow that's weird. Have you noticed any more power with the steeda
I watched your first Mach 1 video when it came out and now I have my own at 19 and watching it again the day I went to pick it up
Wow. Was thinking of doing this to an 01 cobra then boom. A review video. I like the timing so much lol
Oh man sorry about your loss. My friend die too his terminator is still at home and he is verry missed . Newman ca . Mr dlc. . Familly. Man too . Sad af man we still miss him .
Gorgeous. Great build!
Awesome car Much Respect to the build👊
Boosted Mach 1's are a blast to drive! I've got a 2003 Azure Blue Mach 1 that I've been building as well.
I really want to do a termi swap to my mach, ive also wanted the 99/01 cobra front bumper for ever but hard to find and pricey. They should have come on all machs.
Thanks for telling my cars story from day 1 to present day! it means the world! also, "yessir." - pinky guy
The '03-'04 Mach 1 might be my favorite Mustang ever.
You did a great job telling the story of the mach David ❤️❤️❤️ das a good
A redesigned shaker for the S550 hood/body likes would however be sick! It would have to be wider and sloped but def doable...
I miss my mach 1 😭😭 hopefully getting back into one soon 😢
I don’t typically like Mach’s, but this one has certainly changed my mind. Very nice
I Will ALWAYS Love New Edge SN95s, I Got One And I’m Planning On Buying Another One Just So I Can Restore My Current New Edge!
Whenever I mention to someone that I have a Mach 1, their response: "jUsT bUy a TeRmiNaToR BrO"
cause its the truth
Market around here is 12,000 for a mach1 with 120k or 19,000 for a cobra with 80k
@@carlosvelasco4119 I paid 11.5k for 32k miles for my mach 1. Clean title and everything. Either in lucky or people around you charge waaay too much
@@toybox5576 yea that is about right and it's hard to find a decent low mileage terminator under 20 grand. They are better cars but they cost significantly more also. The mach 1 could be built to similar specs performance wise for less money. A set of forged rods and pistons is only like what 1500 bucks? You could also set the compression ratio where ya want it this way for more potential I'd go 10:1 like stock mach 1 if I was going boost. You could throw on a ported Eaton or used TVS and get the 5 speed built for maybe 5 grand total if you do your homework and your own installs. Some may not be able to afford a terminator right off and the mach is more in their price range and they could build it over time. You could come out even performance wise and potential wise for similar money on both give or take but the cobra is alot better set up from the factory but you pay alot extra for that too. Both cars are awesome I just think the mach is a little disrespected when compared to the terminator.
@@midnight347 I agree. I know my next mustang purchase after my bronco comes will be a terminator. Im at a point where I can have both. The mach will stay as is. Maybe a cam. When the terminator comes im going to squeeze as much out as I can
Good on him for keepin the shaker scoop
The engine has a great sound & the car looks perfect👍❤.
To this day, these mod motors still make one of he best modern V8 noises. They have a music like tone to them, and this one is singing in honer of his friend
Those Terminator duck tail spoilers & some 17X10.5 wheels with some 315 tires looks so good from behind.
18x11’s with 335 tires look better
MY2017 Mustangs onwards are selling strong here in Australia. Only seen a few of these ones so far. Really wouldnt mind importing a foxbody and doing a build like Farah's 💯💪
Really cool video overall
Great story!
Sound so good!!
That Terminator review was the first video I saw on the channel.
Garret reminds me of a good ol boy version of Post Malone. Crazy resemblance. RIP to your boy, glad to see you keeping his spirit alive and well through your love of the car 🤙🏾🤙🏾
Amber indicators ❤
More US market cars need these.
Gotta love that new edge body
Very nice car. It sounds just like many stock ZR1s when your getting on it at 4:09.
always wanted a terminator, cool idea doing the swap
hi David. nice vid. liked b4 watching b/c I knew it was going to be good
Nice new edge the cobra front bumper and spoiler and the stance and wheels makes it look 👌 very nice and nice engine for power and sound Good 👍 job beautiful car and God bless 🙌 😀
Beautiful mustang indeed
I got to go to Asheville and drive throughout the mountains with him and my friends a while back, such a good dude. What’s up Garrett!
That car is SO beautiful
Never ever ever EVER gets old
Wow. That black Mustang video was the first blue dude video i saw
I was just watching an old video from DerekBaranProductions and you can see Brandon and Garrett riding in Brandon's Cobra in the video. In the video titled, "we found a bagged mach 1!" you can see the two of them at the 3 minute mark. I've watched this video so many times that despite never meeting either of them, they were instantly recognizable lol. (you can actually see them at like the 2:54 mark but it becomes apparent it's them at the 3:00 mark)
David needs to go drive Adam LZ's Barra swapped GT350....
We all say this same comment whenever Adam builds a dope car
@@YoBoyNero maybe he needs to drive ralph Johnsons aluminator swapped tarus sho
What's wheel size and offset of the CCW's?
That’s dope how y’all put videos of that guy on there RIP
Those rims *mWaH* ..CRISP
Fly high Brandon. Will always miss you buddy..
Probably my fav body style next to the newer ones
I remember exactly where I was and what I was doing when I got the notification for that terminator video
@4:01 is that callaway motor company located in stanley, NC?
Yep
My favorite body style outside of my S550!
Terminator with a shaker hood looks pretty sweet
A shaker hood on an S550 doesn't even look bad, it just really depends on the design. Since the hood is a wide bitch you need to also have a shaker that's a bit streched out with a thinner profile.
What brand wheels are those and size?
That's one good Mustang. 😉👌🏽
What do you have on for mirrors? Are they stock just painted? Thanks
Those are stock 03-04 Cobra mirrors
What rims n tire set up does he have
Not sure if you remember but we spoke at the last Night Moves before you left. My friend had the bagged 1100 WHP 2015. He ended up selling it and the guy wrecked it a few weeks after.
i want you do story on my friends ford lighting hes the one that does the burnout contest at mustang week and kooks headers
Im here for this
Love the sound of a Terminator!
Have one just like this. My Sunday driver. I love it. Only 76,000 original miles.
Man those new edge Terminators & Mach1's where so much fun to mod.
were
@@aftrnoon_ac lol nice job internet English professor, you had to edit it also smart guy
@@dillonbuckley4618 it's my English teacher that's haunting me..😂 I purposely screw up the were, we're, & where. It never fails & triggers the right person too. 😁
@@MickeyR6 😂😂
Im a import lover not really a fan of American muscle but i gotta give credit where its due!!! That car looks aggressive as fawk!!! I likey!!! 👍🏽👍🏽👍🏽
maybe next time you're in town you could review my 6.0ls turbo out the hood 4th gen camaro
Very clean build. All new edge cars should be 4v one day.
Specs of the ccws???
clicked fast. great video David.
How does his car sit like that ?
Sick. You should review a 00-04 Saleen
I agree. A real one
The story behind the car is great no matter what kind of car it is, so why would...so far 16 people...give this a thumbs down ? WTF ?!? Great story ! Badass TER'mach'NATOR !!
Probably heard on the local news about the guy who died in the video. Brandon Bowen wove through traffic passing cars at a very high rate of speed in the center lane before losing control and smashing into a tree. Presumably his girlfriend was in the passenger seat, almost killed her too. Was airlifted to a hospital.
Those doors still look as heavy as they feel, lol it's been awhile
What wheels are those?
Mach Juan
I love it 😻
I am more a fan of the 03-04 cobra bumpers, they are just a tad more aggressive IMHO. Got to love the fact this one has a Terminator setup under the hood. The new edge mach is easily my favorite looking new edge. The only reason the Cobra eeks out the win is that awesome motor! And the owner is 100% right. A new edge mach needs a shaker!
The Machinator