I remember FasterProms K swapping theirs and then to my dismay they said they would turbo it. I left a couple of comments telling them to run it NA for a season to tune the chassis and to see if they really wanted that much power in a shopping cart. My comments didn't get through it seems, they crashed it hard the first couple of times they tried it, after that they parked it and the channel stopped. I think they were getting 650 to the wheels which is insane.
@@draimen3371 Not saying for track use, im saying to keep the damn thing grounded for street passes. That much power n torque in that light a car is a recipe for flipping your car if you dont do it exactly right
@@lukasadamson6091 this thing is safer than you think, the whole black part is like some roll cage type thing. I watched this video years ago where these British people crashed a first gen smart car into a concrete barrier at 70 mph and it held up shockingly well.
Having driven a smart car at 90+ mph, I can personally say this is a SUICIDE MACHINE!!! The brake pedal in a stock smart car feels like a really heavy clutch pedal and it only engages about halfway down. Then, when the brakes do engage, they bite kinda hard. 10/10 would not advise!! 😂
This is literally every toyota's brake pedal I've ever driven. Corolla, camry, Tercel, the brakes don't come on till half pedal travel and then it's like, All the Brakes! Lol 😅😅
Hey David! I'm sure the builder is aware of it, but Quaife has a dedicated gear drive/transfer case for bike engine builds with a built in reverse. Kotouc Gearboxes also has a page about their version as well. One of those setups would be awesome for milkjug, ground clearance and axle angles could be optimized and no more chain destruction.😉
Budgy I looked into this past year when I was debating the dual chain setup and after talking with quaife they told me it wouldn’t hold up to the power I planned on making. I also went as far as talking with FTI about using one of their transfer cases as a diff but the rpm’s in turning would kill the box quickly. The new dual chain setup has been maintenance free at this power level. I set them and haven’t touched them since. Finger crossed it stays that way at the track lol. Thanks for looking out and giving some good info though!!
@@isaacson06 Well I'm happy the doubles are working for you 😊 You would figure a geared unit would be fine for most applications, your build is not "most" applications 🤣 Would love to see what you would do to a Honda Beat, hint hint lol 😉 cheers!
@@Lethal_Venom I guess so, just seems like it'll hit something or something will hit it. and it looked like the previous design didn't stick out quite like this one. and idk if the dynamics of a bike chain being right next to the single wheel is going to be the same as this hanging out in the middle.
I can remember 20 years ago, here in The U.K. when Lotus and Brabus tuned Smart Four Twos, were pushing 120mph. I thought that was terrifying. That thing is on a whole other level. Bonkers. 😆
This is one of those "cause I can" flexes. 😂 This reminds me of the Hayabusa swapped Kei Truck the Cboys did. You should go drag race them even though you would smoke them. lol
Barbed Wire by Rogue! I know you've caught some undeserved flak on the intro music, but it's always been on point. Also glad to see return of one of the best swaps I've ever seen
I had a Hayabusa for 11 years, I'd love to add a Busa motor to my Fiata like this. But OMG the southern Atlantic states are too dang humid to run without AC! It's ok if I go somewhere I can park in the shade, but getting back in to those hot seat is murder when it's 100+ and matched humidity.
Don't forget about Jeremy from Fasterproms K swapped smart car kater tot that he wrapped to look like a little times cozy car plus it was turboed they had to put wheelie bars on it cuz it would easily pull massive wheelies
Oh man this made me happy I always wanted a modded smart car ever since I saw the to an engined one that they put on top gear many years ago It sounded like a really cool idea even though they couldn't actually run both engines at the same time on the road because of some laws or something but this one This was much better It sounds better It looks better looks a hell of a lot more fun you just need to get a custom printed bumper for the back to make it look a bit more normal so everyone has a double take with the parachute
Im so dead after you played that clip of ralph "Im in danger!" Dear god that was so well timed and funny. Also this things is really badass and it sounds amazing. Thing thing is literally screaming
I am 50% sure that I might be the former owner of that FourTwo! If the Carfax of it returns from Florida (sold in Hialeah, FL to me in 2017/2018) and then sold off to Carvana (roughly 2019/2020) then bingo bongo I was the former owner lol. some of the nicks and dings look familiar and if it originally came with Brabus wheels then for sure it was mine
I was seriously thinking to myself before the shifter linkage malfunction, that if the shifter linkage messed up how hard it would be to fix and how often it does mess up lol
Seems like the clutch is slipping under heavy acceleration? I don't see any smoke off the rear tires. It would probably pick the front wheels off in 3 gears if it was actually hooking up.😂
you should make some milk jug t shirts,hoodies n merch 😂😂😂😂 got milk jug ? and have a white smrty on the back burning rubber 😂😂😂😂😂😂 this is by far the best upfit i’ve seen, milk jug is definitely badass😂
As someone who owned a 300kg (with me in it) 250hp motorbike swapped semi street buggy it looked like some of the same flaws (front end comes up due to short well base and shifter issues due to linkages) fixed shifter by putting in a solenoid the front end was weight i got it upto 200kph my friend did close to 300kph who's an ex race driver....So can only image how this handles but i really do like his style :)
Just imagine a CVT transmission from the drag sleds you see on the lakes in Michigan. It would leverage all the power that it can make at peak while keeping the nose from jumping around with gear changes
The power to weight ratio would be crazy on this thing not to mention a chute on a car that's less then 1000kg would probably catch so much air you wouldn't need the brakes 😂
I've had thoughts in the past of taking a Dodge Neon and putting a Hemi in it. Suspension would need to be reinforced to handle the higher engine weight, would need a custom hood because engine bay is too small, would have to swap to RWD, again because engine bay too small for FWD or AWD front diff + transmission... and I'd need a lot larger tires just to handle the increased power. Might be easier to just swap in a gas turbine from a small helicopter, those can be sized down to 600 hp at the gearbox output shaft. Couple that to a CVT and I might have a sleeper, or at least a sleeper when the engine's off!
Huh. This thing lives in the same Iowa county that I do. I don't know how I feel about that. Part of me wants to go track it down and see it in person, and another part of me wants to start ordering my groceries online so there's less of a chance I might ever accidentally share the road with this.
I love this thing so much….
But it’s terrifying.
How does this thing not have a front splitter to stop it from lifting yet? its not very... aerodynamic... right now.
@@KadiusFTW why does it need a front splitter if its only doing short passes, its not a track car lol.
If your scared your doing something right
I remember FasterProms K swapping theirs and then to my dismay they said they would turbo it. I left a couple of comments telling them to run it NA for a season to tune the chassis and to see if they really wanted that much power in a shopping cart. My comments didn't get through it seems, they crashed it hard the first couple of times they tried it, after that they parked it and the channel stopped. I think they were getting 650 to the wheels which is insane.
@@draimen3371 Not saying for track use, im saying to keep the damn thing grounded for street passes. That much power n torque in that light a car is a recipe for flipping your car if you dont do it exactly right
If I ever see a parachute on a smart car, you bet I'm not racing it lol
lol
I would. I want to see it rip.
So you've never raced things knowing you'll lose just to see its potential? I raced a turbo huracan in a corolla lmao was 100% worth it 😅
I'll " race it " so I can see it go lol
That’s not a parachute. It’s a massive pair of underwear for all the times the owner has shat himself
There's a motor inside your coffin.
These things are structurally safe in high impact crashes.
@@darkblaze176 not this one
@@elitecol69 bruh they literally strengthened the frame !! >.>
@@darkblaze176did the also strengthen your organs? A smart has no cushion zone.
@@lukasadamson6091 this thing is safer than you think, the whole black part is like some roll cage type thing. I watched this video years ago where these British people crashed a first gen smart car into a concrete barrier at 70 mph and it held up shockingly well.
Having driven a smart car at 90+ mph, I can personally say this is a SUICIDE MACHINE!!! The brake pedal in a stock smart car feels like a really heavy clutch pedal and it only engages about halfway down. Then, when the brakes do engage, they bite kinda hard. 10/10 would not advise!! 😂
Hell i drive mine at 90 everyday to work! governed at a whopping 92 mph😂
This is literally every toyota's brake pedal I've ever driven. Corolla, camry, Tercel, the brakes don't come on till half pedal travel and then it's like, All the Brakes! Lol 😅😅
I got the EV.
I really want to hotrod it. Maybe add rockets.
@@jtjames79 slap a tesla battery in it🤣
@@UserFormelyKnownAs_hjkh I can't wait for the in hub motors hit the market.
I also want to wrap it like a little tykes car.
There’s a guy that swapped a Yamaha r1 cross plane I4 into a Toyota IQ a while back
That's nothing, Aston Martin themselves shoved a 4.7 V8 in their Cygnet (a.k.a. the Aston Martin version of the Toyota IQ)! 😎
@@McBeamer94true definition of hot rodding 😂
That sounds fun 😂
We've gotta see that on film thts nuts!
@nazz2406 the video is on UA-cam goodwill hill climb
2:23 “so much torque, the chassis twisted coming off the line”
Ehhhhh
Pause
I got that reference
cant escape this fuckin sentence
hayabusa motor with a roll cage on wheels?! LETS GOOOO
hayabusa swapped smart is something you never expected, especially if it’s at a drag race event haha
I like the Hayabusa swapped K truck from Cboys. That thing is sick!
Damn i didnt know coffins come in white
Hey David! I'm sure the builder is aware of it, but Quaife has a dedicated gear drive/transfer case for bike engine builds with a built in reverse. Kotouc Gearboxes also has a page about their version as well. One of those setups would be awesome for milkjug, ground clearance and axle angles could be optimized and no more chain destruction.😉
Budgy I looked into this past year when I was debating the dual chain setup and after talking with quaife they told me it wouldn’t hold up to the power I planned on making. I also went as far as talking with FTI about using one of their transfer cases as a diff but the rpm’s in turning would kill the box quickly.
The new dual chain setup has been maintenance free at this power level. I set them and haven’t touched them since. Finger crossed it stays that way at the track lol.
Thanks for looking out and giving some good info though!!
@@isaacson06 Well I'm happy the doubles are working for you 😊 You would figure a geared unit would be fine for most applications, your build is not "most" applications 🤣 Would love to see what you would do to a Honda Beat, hint hint lol 😉 cheers!
I lost it with the Ralphie "Im in danger" 🤣🤣🤣
1/8th and 1/4 times would be cool.
See them tires... don't race Dat Boi. 😂
The name gets me every time 😂. Man, I was gritting my teeth and stressing with you during each launch. That’s an awesome but exhausting thing to drive
Another day another banger video with the played out "Ultimate Tuner Troll" title.
chain sticking out below the subframe seems.. scary?
Nothing covering motorcycle chains, they are completely exposed minus the top guard
@@Lethal_Venom
I guess so, just seems like it'll hit something or something will hit it.
and it looked like the previous design didn't stick out quite like this one.
and idk if the dynamics of a bike chain being right next to the single wheel is going to be the same as this hanging out in the middle.
It'll be fine. It has more protection than actual motorcycle chains
Was thinking the same but I don’t know as much about vehicles
I can remember 20 years ago, here in The U.K. when Lotus and Brabus tuned Smart Four Twos, were pushing 120mph.
I thought that was terrifying.
That thing is on a whole other level.
Bonkers. 😆
Suzuki should have sold those engines as crate motors because so many of them got used for other projects .
EBay. 2-4k
This is one of those "cause I can" flexes. 😂 This reminds me of the Hayabusa swapped Kei Truck the Cboys did. You should go drag race them even though you would smoke them. lol
Barbed Wire by Rogue! I know you've caught some undeserved flak on the intro music, but it's always been on point. Also glad to see return of one of the best swaps I've ever seen
This is like a real life forza build lol
Best intro ever. Next idea 500ci front wheel drive Cadillac.
hell yeah milk jug again let's go dude
This thing needs a quickshifter for some no lift shift! You can pickup a Healtech unit for about $350
if i had that car i woulda built an external crash cage for the summersaults that would occur in a turn.
2:22 "So much torque, the chassis twisted coming off the line."
Totally bonkers-super-phycho supreme! I'm gonna go ahead and approve 'cause this thing is the cat's pajamas! Looks fun.
I had a Hayabusa for 11 years, I'd love to add a Busa motor to my Fiata like this. But OMG the southern Atlantic states are too dang humid to run without AC! It's ok if I go somewhere I can park in the shade, but getting back in to those hot seat is murder when it's 100+ and matched humidity.
Dude.... EVERYTHING is the ultimate tuner troll. New headlines man.
LOL I love it. Lunacy on wheels. I would've called it...."lil' busket". Or "manic flea".
Iowa black out plates for the win
Iowa has some of the craziest custom plates
I checked it out at Karls last year, nice build, detail and it sounds really healthy. way to go!
Don't forget about Jeremy from Fasterproms K swapped smart car kater tot that he wrapped to look like a little times cozy car plus it was turboed they had to put wheelie bars on it cuz it would easily pull massive wheelies
Oh man this made me happy I always wanted a modded smart car ever since I saw the to an engined one that they put on top gear many years ago It sounded like a really cool idea even though they couldn't actually run both engines at the same time on the road because of some laws or something but this one This was much better It sounds better It looks better looks a hell of a lot more fun you just need to get a custom printed bumper for the back to make it look a bit more normal so everyone has a double take with the parachute
Im so dead after you played that clip of ralph "Im in danger!" Dear god that was so well timed and funny. Also this things is really badass and it sounds amazing. Thing thing is literally screaming
you are still one of my favorite youtubers... genuine happiness every time you drive. it is refreshing!
5:15 yeah you was really worried about dying right there 😅
This is one of the coolest builds I have ever seen and it has looks to go with it.
Highlight of my weekend right here what a way to finish it off!!
Pull that chute at a good speed and you're probably airborne 😂
I am 50% sure that I might be the former owner of that FourTwo! If the Carfax of it returns from Florida (sold in Hialeah, FL to me in 2017/2018) and then sold off to Carvana (roughly 2019/2020) then bingo bongo I was the former owner lol. some of the nicks and dings look familiar and if it originally came with Brabus wheels then for sure it was mine
A Hyabusa powered Smart Car AND a GR Corrola? Man has it good!
This thing looks like a shopping cart with a 400hp Hayabusa motor :D
Pretty damn cool! You need to add a front wing, like Formula One cars...lol
I was seriously thinking to myself before the shifter linkage malfunction, that if the shifter linkage messed up how hard it would be to fix and how often it does mess up lol
This Has Always Been My Dream Car Swapped But This Right Here Is It's Ultimate Form
Im bummed it had issues this was one of my favorite videos of yours from years ago. Incredible car
Love when the right drive chaft snaps it will hit the oilpan 😂
The smart mulet.😂 business in the front, party in back.
The racing tow hook on the fromt of this thing is the most awesome thing to me 😂❤❤❤ and it needs it. This thing is a certified beast
the only thing more terrifying is the audio balance in this video
That thing is fucking *sick* tho
I love how it wants to go do a wheelie on every gear!
He sounded like he was in literal pain at the end of the video.
Can only imagine how fast his heart was racing in Milkjug 😂
I can tell you’re not a motorcycle rider by your shifting. Sick build.
And I’m sure the video doesn’t even do it justice for how ferocious this thing really is😂
Come up behind this at the traffic lights and it would be like " Hiya Busa " Then " Bye a Busa"
Seems like the clutch is slipping under heavy acceleration? I don't see any smoke off the rear tires. It would probably pick the front wheels off in 3 gears if it was actually hooking up.😂
I love that his reaction to his car getting broke was "Did you even get to rip it?"
Great video! The real of having custom cars
you should make some milk jug t shirts,hoodies n merch 😂😂😂😂 got milk jug ? and have a white smrty on the back burning rubber 😂😂😂😂😂😂 this is by far the best upfit i’ve seen, milk jug is definitely badass😂
Polk license plate? Are you from iowa?
Eric is a legend.
This thing is amazing and hilarious at the same dang time 😂😂😂😂❤
OTL guys are fantastic! Fun and professional! Awesome to see their from my home state too.
This thing is proven to save your life in a bad crash, safest place to be if running a Hayabusa engine so it's all good
Absolutely love these type of builds
Take it to a slide show!! 💪🏼👊🏼
i’ve been talking about doing this for years and my sons think i’m nucking futs 😂
I have always wondered who rolled Faster Proms Katertot.
As someone who owned a 300kg (with me in it) 250hp motorbike swapped semi street buggy it looked like some of the same flaws (front end comes up due to short well base and shifter issues due to linkages) fixed shifter by putting in a solenoid the front end was weight i got it upto 200kph my friend did close to 300kph who's an ex race driver....So can only image how this handles but i really do like his style :)
Just imagine a CVT transmission from the drag sleds you see on the lakes in Michigan. It would leverage all the power that it can make at peak while keeping the nose from jumping around with gear changes
So awesome definitely a death trap I need one
Clean build. Thing needs to come with a helmet!
Looks amazing
The power to weight ratio would be crazy on this thing not to mention a chute on a car that's less then 1000kg would probably catch so much air you wouldn't need the brakes 😂
If this thing doesn't make you chuckle even a little, idk what will.
I remember when faster proms built the Kseries smart car. thing was dope
Hell Yeah!
The legendary Kater-tot
@@jameseyman9078 :)
Now they just need a “run from the cops” episode.
We love this! What was the most difficult part of the swap?
only in iowa 💀💀💀
Smart Fortwo + Hayabusa Turbo Engine = Free Ticket to Heaven 😂
Short Wheelbase With That Kind of Power is Crazy
Next upgrade should be swapping the sprockets for pulleys and belts. Should last longer, be smoother, and quieter.
smart car going over 200+ mph is another level
I've had thoughts in the past of taking a Dodge Neon and putting a Hemi in it.
Suspension would need to be reinforced to handle the higher engine weight, would need a custom hood because engine bay is too small, would have to swap to RWD, again because engine bay too small for FWD or AWD front diff + transmission... and I'd need a lot larger tires just to handle the increased power.
Might be easier to just swap in a gas turbine from a small helicopter, those can be sized down to 600 hp at the gearbox output shaft. Couple that to a CVT and I might have a sleeper, or at least a sleeper when the engine's off!
That thing needs some wieghts in the front. Nice build.
That thing would be a blast
That thing is gonna pop a wheelie🤣🤣
So to reverse, you get out and push?
Huh. This thing lives in the same Iowa county that I do. I don't know how I feel about that. Part of me wants to go track it down and see it in person, and another part of me wants to start ordering my groceries online so there's less of a chance I might ever accidentally share the road with this.
Now I want to see Milkjug 3.0 with 800WHP.
So a jet? Cause that thing would literally fly 😂😂
@@ByyZeroxmilkjet
I have bracket raced from 1984 until 1992...I WANT ONE!!
Thank you for this!!!!
Thank you for risking your life for this one 😂
I loved seeing this car in downtown DSM before the police went crazy
There needs to be a Tshirt made saying: I survived the Milkjug
There are few vehicles I would flat out say no to, if I were ever handed the keys. This is one of them. It's too risky
That's so sick!
Ahhhh the name of this thing is perfect!
My friends smartcar just blew up a couple days ago... I know what im doing this winter!