CBR 1000 RR no start issues

Поділитися
Вставка
  • Опубліковано 18 гру 2024

КОМЕНТАРІ •

  • @ChrisCutcliff-q2u
    @ChrisCutcliff-q2u Рік тому

    Thanks for timing is 2011 Honda CBR1000RR 2500 mi.. I k ow you're right from past experiences with aftermarket "Performance parts" (see JUNK) SPEND MORE MONEY ON AFTERMARKET TO DOWNGRADE QUALITY RELIABILITY N PERFORMANCE

    • @0jambrosey0
      @0jambrosey0  Рік тому

      Yep if you are going to use aftermarket parts, always solder the connections. Taking the chance for downgrading the quality. CBR 1000 RR is great on its own, no need to add anything to it! Wish I bought a bike without previous owners messing with it!

  • @divakarjeevadj7104
    @divakarjeevadj7104 11 місяців тому

    Hi. Thinking you arebmy saviour.. i have 2006 rr and when I turned it on, the odo turns on, analog goes up and down. But when I turn the ignition swithch ON, HESD/Cranking is not happening. When I push the self starter key, it is churning with sound, but bike is not turning ON.

    • @divakarjeevadj7104
      @divakarjeevadj7104 11 місяців тому

      Poor battery???? @0jambrosey0

    • @divakarjeevadj7104
      @divakarjeevadj7104 11 місяців тому

      Help me here please!

    • @0jambrosey0
      @0jambrosey0  10 місяців тому

      @@divakarjeevadj7104 I tore my bike apart a couple of times! Checked every relay they all were perfect working order. Even changed out the fuel pump for no reason.
      Check your bike for aftermarket parts, and solder the connections.

  • @Angkolstv-n2s
    @Angkolstv-n2s Місяць тому

    What about the high beam and signal light on gauge still light on and no start.. Anyone? 😔

  • @michellebazzell9458
    @michellebazzell9458 Рік тому

    What aftermarket parts are you talking about? I got aftermarket lights change. My battery is my battery and now I have no power.

    • @0jambrosey0
      @0jambrosey0  Рік тому

      July 11, 2023

    • @0jambrosey0
      @0jambrosey0  Рік тому

      Soldering is the key, don’t use clip connectors.

    • @NASA6453
      @NASA6453 Рік тому

      SCITCHLOCKSSSSS DIPSTICK!💩💩

  • @kevinquigley1555
    @kevinquigley1555 10 місяців тому

    Hey buddy? Any idea the shift light you have on there? The stock one is very tiny. I promise if I get one I’ll make sure it has proper connections 😂

    • @0jambrosey0
      @0jambrosey0  10 місяців тому

      I do not know the brand, but I can find out. This shift light I have is bright and needed. You are right, the stock one wasn’t cutting it. I’ll get back to you on that.

    • @kevinquigley1555
      @kevinquigley1555 10 місяців тому

      @@0jambrosey0 I did a little digging and for heal tech makes one and you can splice it right into the wires for their gear indicator. Think I may pick that up

  • @jslawinski3196
    @jslawinski3196 Рік тому

    Do you still have the old pump?

    • @0jambrosey0
      @0jambrosey0  Рік тому

      Yes I still have the old pump, the new one I bought was $730. Old one worked great so I saved it.

  • @tarikaweis6246
    @tarikaweis6246 Рік тому

    Did you figure out the issue bro? My 2014 CBR 1000rr
    Wont start after I turned it off today the battery is good and fuel pump primes

    • @0jambrosey0
      @0jambrosey0  Рік тому

      Yes soldering the connections instead of cheesy wire connectors is the key!

  • @ricoconsulting
    @ricoconsulting 2 роки тому

    kick stand/kill switch/fuse link test meter schematic etc.

  • @daniel_3.5.7
    @daniel_3.5.7 Рік тому +2

    Bro were u drunk when you filmed this video? 😂🤣🤣

    • @morteza692
      @morteza692 Рік тому

      😂😂

    • @0jambrosey0
      @0jambrosey0  Місяць тому

      Yes, yes I had some Jack n Coke. Frustrations 😂. My bad, definitely know better now not to film after a drink. :)

  • @ryanmcmanus9665
    @ryanmcmanus9665 2 роки тому

    I think I’m probably having the same problem brother :/
    SMH 😮

    • @neoyasechaba221
      @neoyasechaba221 2 роки тому

      Me too

    • @0jambrosey0
      @0jambrosey0  Рік тому

      My problem was the cheesy wire connectors. Soldering them together is best, fixed it.

  • @ricoconsulting
    @ricoconsulting 2 роки тому

    over heating coil-stator grounding stator 12v to 40,000v lots of heat lots of stress

  • @ricoconsulting
    @ricoconsulting 2 роки тому

    check resistance

  • @michellebazzell9458
    @michellebazzell9458 Рік тому

    I got power, but I have no start

    • @0jambrosey0
      @0jambrosey0  Рік тому

      My issue was loose connections, darn clip connectors. Soldering is the key.

  • @joesmoke9624
    @joesmoke9624 2 роки тому +1

    Too much weed

    • @0jambrosey0
      @0jambrosey0  Рік тому +1

      lol, no I had bit of jack Daniels. Good tip though, film sober.. thanks for the tip.😅