Honda CBR 1000 Spark Plug Change | How To Change Spark Plugs On A 2007 CBR1000 (And Other Years)

Поділитися
Вставка
  • Опубліковано 31 тра 2022
  • Changing Spark Plugs on a 2007 CBR 1000
    Spark Plugs for 2004 - 2007 CBR 1000: amzn.to/3qticoj
    Please subscribe to the Channel if you like the video!
    / @the.odyssey
    This video goes through the process of changing the spark plugs in a 2007 CBR1000. We start by removing the fuel tank cover and gas tank. After that we open and remove the air filters and ram air box. Then we remove the coils and wires to the spark plugs. Finally we Change the sparkplugs and torque them to spec. After that we reassemble all the components removed to change the spark plugs.
    #bikelife #CBR #cbr1000
    As an Amazon Associate I earn from qualifying purchases.
  • Авто та транспорт

КОМЕНТАРІ • 48

  • @imperialtekk9443
    @imperialtekk9443 Рік тому

    Needed this refresher. My 04 has sat in storage for 10years. Just now getting it all torn down. Doing a full restore on it. Owned since new right off the showroom floor in 04. Currently has 16k miles on her.

    • @The.Odyssey
      @The.Odyssey  Рік тому +2

      Glad you found it useful! I have a bunch of videos for this bike and more to come once I finally get around to the editing. New monitor coming tomorrow so I might just have to try it out on the engine rebuild video.

  • @Ryan46
    @Ryan46 5 місяців тому

    This was helpfu., thankyou

  • @gabrielalvarez-nu7mc
    @gabrielalvarez-nu7mc Рік тому

    Nice video brother help My alot

  • @MrReniks
    @MrReniks Рік тому +1

    Just find you on yt, glad i did!

    • @The.Odyssey
      @The.Odyssey  Рік тому

      Thanks for watching! I'm glad my videos are helping.

  • @mistersilk9269
    @mistersilk9269 10 місяців тому

    Hello sir can you help me I wondered how you get the throttle body of the cbr ?
    Thank you

  • @Desmo25
    @Desmo25 9 місяців тому

    What’s the type or part number of the ngk iridium ix for a 2017 honda cbr1000rr?

  • @brentp.4090
    @brentp.4090 3 місяці тому

    Thanks this looks like it is going to be a frustrating job!

  • @marcelschlebos3975
    @marcelschlebos3975 Рік тому

    Good video Thanks. Normaly i do BMW and cars. Now i have a friends fireblade in the garage. It not running for 5 years but the storage was dry and warm.
    Your videos give me a good inside to do the job.
    I hope that it isn’t nessesary to remove te engine to change to plugs?

    • @The.Odyssey
      @The.Odyssey  Рік тому

      No, that was just a joke as I was rebuilding the engine.

  • @dunk856
    @dunk856 Рік тому

    Can you do brakes repair on this too please

  • @bigguy8586
    @bigguy8586 Рік тому +1

    Hey I have a question sbout the 5 plugd on the right side of the engine that sre on a little metal rail. I unplugged them to switch out the harness when I was doing the spark plugs. Do upu lmow where these plug into. I c only yindntw9nofnyhe five plugs

    • @The.Odyssey
      @The.Odyssey  Рік тому

      Check out my engine removal video. This may help. You got some typos there so I don't know exactly what you are asking.

  • @brentp.4090
    @brentp.4090 3 місяці тому

    Before I go this far though I have a question. I have a 06 CBR 1000 and I let it sit for a month without starting. Now after adding a new battery it will crank but it won't come on. The fuel pump is good too I think because it still primes when I turn the key

    • @The.Odyssey
      @The.Odyssey  3 місяці тому

      I know this is stupid, but I'm pretty sure that 07 would crank with the kill switch on. Make sure to check that if you haven't. Sitting shouldn't make it need spark plugs.

  • @nikossofos2786
    @nikossofos2786 6 місяців тому

    for you my friend i want to ask a question,,at how many thousands of kilometers do the spark plugs need to be replaced? in this particular model Honda CBR 1000 model 2006-2007

    • @The.Odyssey
      @The.Odyssey  6 місяців тому

      Honestly, I'm not sure what is recommended. I do it every few years on my street bikes

  • @jrcsheit94
    @jrcsheit94 2 місяці тому

    Bro any idea on part number for ignition coils?

    • @The.Odyssey
      @The.Odyssey  2 місяці тому

      here is an aftermarket set. OEM part number is listed in the title of the link if you want to go that route amzn.to/3VMEfqV

  • @Livmywayforever
    @Livmywayforever 6 місяців тому

    Where did u put ur radar? Trying to not take it out to swap out the spark plugs

  • @davidtest7278
    @davidtest7278 Рік тому

    Question man I have the same bike and mine bogs at 8000rpm what should I look into changing out first?

    • @The.Odyssey
      @The.Odyssey  Рік тому

      Bogs or misfire? Did I happen to just see you posting a a CBR Facebook group about this?

    • @bigguy8586
      @bigguy8586 Рік тому

      Sparkplug, then fuel. Check to see how dark plugs look. If they ere black. Too rich, white too lean. Tan is perfect. If you have fuel commander either take it out or reprogram it according yo spark plug. Check for vacuum leaks. Check air intake flap in the front of intake snd make sure it I'd operating

  • @PedroLucas-wr7pt
    @PedroLucas-wr7pt 6 місяців тому

    What is the model of screw that holds the seat?

    • @The.Odyssey
      @The.Odyssey  6 місяців тому +1

      It's a 6mm allen wrench. amzn.to/3Rk6Gsu. Edit: you asked specifically about the screw, if that's what you are after it would be called a socket pan head screw. M6 x 1.00 would be the thread, 14 mm long.

  • @rileywomack9232
    @rileywomack9232 17 днів тому +1

    How do I get the air intake out

    • @rileywomack9232
      @rileywomack9232 17 днів тому

      I’m stuck where I can’t get the second half of the air intake out the part you just pushed through so easy.. that’s the last step till you get to the spark plugs and I’m stuck please help!!!

  • @kevlarperez
    @kevlarperez 2 роки тому

    Great video! Getting ready to do mine on this bike finally. Did them on my old 929 but this shouldn’t be too bad. Also love the cancel culture shirt 👏🏽

    • @The.Odyssey
      @The.Odyssey  2 роки тому +1

      Thanks! I have 6ish videos done for this bike and more to come (editing takes time). Hit subscribe (if i've earned it) and check em out. Also, I love the comments... come back and tell me how it went.

    • @billydirt89
      @billydirt89 8 місяців тому +1

      I have both bikes the 929 is way more roomy to work on

  • @TheBadMadMan786
    @TheBadMadMan786 Рік тому +2

    Good video, helpful indeed, but damn I cringed when you left those intake holes exposed after you removed the throttle bodies, plug em up for safety.

    • @The.Odyssey
      @The.Odyssey  Рік тому

      Entire tear down. I changed the crank

    • @TheBadMadMan786
      @TheBadMadMan786 Рік тому

      @@The.Odyssey ah OK. My bad. Wasn't aware. Stay up bro.

  • @HighGrade_FireBlade
    @HighGrade_FireBlade 7 місяців тому

    Pro tip for the lower airbox vacuum hoses; apply a small amount of silicone grease like sil-glyde to the nipples on the airbox and those hoses will literally slip on and off like butter. No struggle necessary. Works with nitrile vacuum/oil hoses and EPDM coolant hoses because both are resistant to silicone. Never use mineral grease on EPDM coolant or brake hose. It will disintegrate the rubber.

    • @The.Odyssey
      @The.Odyssey  7 місяців тому

      I like my hoes firmly attached to my nipples

  • @VictorManuel-qs7ro
    @VictorManuel-qs7ro 6 місяців тому

    Spark plug part number? please

    • @The.Odyssey
      @The.Odyssey  6 місяців тому

      There is a link to them in the description bud

  • @dunk856
    @dunk856 Рік тому

    And maybe front and rear suspension tear down and service

    • @The.Odyssey
      @The.Odyssey  Рік тому +1

      Unfortunately I don't have the bike anymore. I rebuilt it and sold it (that was its purpose for me). I do still have a few videos I need to edit. I cut through hours and hours of footage to put these together. I don't believe I have footage showing brakes or suspension. I may have replacing the fork seals but I'm not sure if I taped it or not.

  • @RazN00s
    @RazN00s Рік тому +6

    Take off engine to change spark plugs? 😂 Not very acurate guide 😀

    • @The.Odyssey
      @The.Odyssey  Рік тому

      Listen, your process may be different than mine but all I'm saying is my way totally worked

    • @rhyno9798
      @rhyno9798 Рік тому +1

      Yeah, I don't get why you didn't show how you did it on the bike you started showing us on? That is the process we're interested in.

  • @ashhale6971
    @ashhale6971 Рік тому

    Hey man do you have a instagram where I can message ya I’m having some issues fixing my 06 cbr 1krr