If your dryer looks like this one, this is the near-universal kit to fix it: bens-appliances.com/products/whirlpool-dryer-noise-repair-kit-4392065-includes-691366-341241-349241t?_pos=2&_sid=3c3430674&_ss=r
This video is clear and with just the right amount of detail to understand the steps to repair the Maytag dryer without unnecessary commentary, and some good tips on the difficult steps
I wish I could hug you! You’re video saved me! I’ve been a single mom and I don’t really have someone to help me figure out these things but I found a marker in mine and now it works great again!!! Thank you again!
Thank you! My maytag dryer had suddenly started squeezing very loudly during a cycle. My wife found your video and dared me to do this "easy" repair just the way you'd done it. We ordered the parts listed here and for less than $30 we repaired our dryer in about an hour. You just saved us over $150 dollars in repairs. Cheers!
I love how quick and thorough this video is! 👏🏻 We are extremely poor right now and barely scraping by. I honestly thought it was the belt or rollers, so I looked at those first. 😂 Then I moved on to the blower and the blower fan is totally broken in half. I’m hoping I find the right blower to order. Thank you so much for helping all us gals fix our dryers! 🙌🏻😀
This video is legit! First one that showed the inspection of the blower housing and assembly. Upon inspection found a paint can opener that must've fallen into the lint trap area and jammed the blower wheel. Problem solved! No thermal fuses blown luckily. Thanks Ben!
I ordered the parts through your link. Received them in 4 days. Followed your instructions and the problem is solved. Thank you! My dryer is a Maytag Dryer MGDC215EW2.
Thanks. Have this same exact model. Had it apart twice. Cleaned it up and lubed the rollers. Helped for a while. Ordered repair kit at your website today.
You saved me quite a bit. Had a loud whining noise and thought i was on the verge of a new dryer. Took the dryer completely apart per your instructions. Vacuumed and cleaned the inside....Back to normal. Thanks
Thank you so much for this video! our Maytag dryer started making noise. We took the back side apart as shown in the video, and man! there were so many broken items (pencils, legos, jewelry, etc). After cleaning it all up the dryer is working as when it was new back in 2017. Next year we will check the front side and buy the kit.
A helpful video! The first time I watched, you made me realize the importance of removing the back panel and cleaning that area. I'll be doing that seasonally from now on. I purchased your kit because my Maytag dryer was making a loud thumping noise, along with its signature squeak. While that makes for a wonderful beat for a background track, it's not conducive to a healthy appliance. I received the repair kit in 2 days (absolutely amazing!) and successfully fixed my dryer. All the parts fit perfectly! For anyone reading, I have the Maytag dryer model MEDC215EW1. Thank you, Ben!
Thank you! Just taking it all apart and putting it back together seem to somehow fix the banging around. The only tricky part was putting the beltloop back through the the idler pulley as your wrist was in the way for those crucial few seconds. Eventually got it figured out through trial and error and a bit of knuckle skin. Thank you, your video was extremely helpful and got the job done!
I remembered how hard it was to get those DRAT tri clips off while replacing the wheels. WOW!!! Thanks for this vid that took me down memory lane. Cheers from S. CA
Thank you so much for this clear, speedy and thorough tutorial! Our dryer was banging and followed your instructions (besides having to change any belts luckily) and got it to work like new! Thanks again
Thank you for this amazing tutorial and parts listing!! I ordered the parts before even openings my drier hoping to just replace it all in one go. Turns out that hair got between the inside of the roller wheel and the shaft, rubbing DEEP grooves in both, so now I am waiting for my replacement left shaft to come in the mail to complete my install!
I totally fixed my dryer by watching this video! Ordered the parts kit in the link. Works perfectly. Thank you SO much for posting this. Saved us a lot of money!
You sir are my hero, not only did you have the video showing how to, you link the parts I need. Hell yes. Mine was a bad lower roller wheel but if I replace one, may as well replace it all
This was a very helpful video. Thanks for the content. I fixed my dryer and saved what would have been an expensive service call. I also learned that it would be crazy not to take it apart and clean it every two years or so! Our dryer is in the basement, so cleaning out the vent hose will really help it be more efficient.
Dryer started making a loud grinding noise this afternoon with a load full of sheets in it. Thankfully I was able to just follow the first part of the video and retrieve a golf pencil out of the fan. Thank you!
Thanks a ton for this video. I watched a dozen others before finding yours and yours was by far the best video and exactly what I needed. I appreciate how you explained every step in the process and gave tips along the way to make it easier for us. I never thought I would be able to disassemble and reassemble a dryer! My dryer was making an awful dog-whistle-like squealing. I didn't have any replacement parts so I just followed your video and cleaned the wheels (I used brake cleaner) and put the tiniest amount of lithium grease inside the rollers. I also cleaned the pulley and put the tiniest amount of WD-40 on it (not the pulley itself but its moving parts). It seemed to fix the problem as the dryer is running wonderfully now. You might have said this but I would like to emphasize how sharp some of the metal edges are. When I finally got the front put back on I noticed I jad sliced two of my fingers (on different hands) on the inside of the front panel. It looked like a murder scene 😅 so be careful everyone.
I gotta say i loved your video my man. We have same model and it was making some crazy violent noise and to be honest i still dont know what the issue was but i took it a part and put it back together and it seems to be working so ill take it haha. But your video really made things a breeze. If all appliances had repair videos like this I'd probably never buy another new one just keep repairing it. Gotta love right to repair.
Super helpful instructions. I did buy the kit but the belt was almost two inches shorter than the one on the dryer so I reinstalled that. Otherwise great stuff!
Success!! I installed the kit today and the problem is gone. Thank you so much. BTW, I found about $4.00 in change inside the machine, a little reward for 90 minutes of my time to install the kit.
Interesting video to say the least. I appreciate the time you give to do it. Does the dryer sound quiet now? Also I notice you didn't use a power driver on the screws. Is there a reason for that? Thanks for the video.
I just dont for videos because I usually want people to think "Oh, I can fix this with just a screwdriver!" but the next video that bit me because of dealing with a side by side fridge. Eventually I'll probably just switch permanently to a power drill on everything because its just soo much faster on and off camera. We always try to use drills off camera, but on camera I've tried to make it simple. Dryer is quiet now and sold already
This video was perfect man but I’d say to put the drum on the back pulley first too. That part was causing me a huge problem. Other than that this video was amazing. I wish I was rich so i could send you some money for removing the stress I just went through. I hope you receive good karma for being a good person. Asap.
😄...i caught the St Anger Metallica jab....reminds me of a similar post when you said "first lets chk the drum for trash that can make the noise and get rid of it" ...and you tossed the St Anger cd...lol classic 😎
Helpful. But folks, when you take your dryer apart, pay special attention to the blower seal (gasket where the front of the dryer meets the blower fan). Mine was stretched out beyond re-installation. The replacement part for my Maytag MDE4000AYW is no longer available new. I lucked into a resale of one on ebay, but if I hadn't found a suitable replacement, replacing the drum rollers/axles, drum belt, and felt seal would have been too much time and money down the drain. Be forewarned and check your blower seal to find out if it is still in good shape before you open up those replacement parts.
You have another sub! lol Have you done a video on freezers? I wasn't able to find one in your list...but I'm a dummy on computers, so it's possible I missed it. If not, could you? I am thinking: Upright vs Chest, Brands, Expected Longevity, etc. Also, how to repair if they still run but act more like a fridge than a freezer. I live in remote-ish Alaska, so having large freezers is very important to us. Thank you sir, you certainly have the gift of teaching!
Great video. Do you have a video for a Maytag gas/propane clothes dryer that is making noise? Would the repair parts you linked be the same? (The lint screen is at front, after you open door). Thanks!!
that squeaking drive me crazy i spary White grease on the wheel shafts every 30 days it's worth it to not hear that squeaking sounds thank god i have a older Kenmore dryer it takes about 20 minutes to do 😊😊😊
I just did all of your steps and cleaned everything… I out everything back together and have no power? I’ve checked the outlet and there is power. What could I have done???
Love your videos! Your appliance recommendations have saved us time, headaches and serious money. I have an older Maytag Ensignia Electric Dryer Model No.: MDE8757AYW (the lint filter is inside on the lower front of the unit). Will the Whirlpool Dryer Noise Repair Kit work for this model?
I have a top of the line Kenmore washer, top load, that won't drain on a regular wash. I have to move the dial to another setting, usually drain to get the water out. I'm a widow on a pension and can't afford a big bill to get it fixed. I'm pretty handy, so I'm wondering if I could fix this myself.
My Maytag centennial dryer has a issue where once it runs and for a while, if I open it to then close it and try to run it again, I hear a buzzing noise behind the timer selector wheel and it won't start up again until I unplug it and let it sit for a while. I bought a kit with all the sensors and the heating element and it didn't fix the problem. Any clues to what it could be?
Any thoughts on fixing newer model GE profile (model PTD60GBSR0WS) intermittent vibration from burner shield cylinder and back duct running up toward drum? There’s no missing screws or broken tabs from what’s shown in online IPC. The parts can be made to rattle just tapping on them.
If your dryer looks like this one, this is the near-universal kit to fix it: bens-appliances.com/products/whirlpool-dryer-noise-repair-kit-4392065-includes-691366-341241-349241t?_pos=2&_sid=3c3430674&_ss=r
Thank you for your helpful video and all the information you provided!! 👍🏾
This video is clear and with just the right amount of detail to understand the steps to repair the Maytag dryer without unnecessary commentary, and some good tips on the difficult steps
This is the best how to video I've ever seen. So thorough and articulate of the little things that can add hours to a project. Thank you.
I wish I could hug you! You’re video saved me! I’ve been a single mom and I don’t really have someone to help me figure out these things but I found a marker in mine and now it works great again!!! Thank you again!
Same here!!
Thank you! My maytag dryer had suddenly started squeezing very loudly during a cycle. My wife found your video and dared me to do this "easy" repair just the way you'd done it. We ordered the parts listed here and for less than $30 we repaired our dryer in about an hour. You just saved us over $150 dollars in repairs. Cheers!
I love how quick and thorough this video is! 👏🏻 We are extremely poor right now and barely scraping by. I honestly thought it was the belt or rollers, so I looked at those first. 😂 Then I moved on to the blower and the blower fan is totally broken in half. I’m hoping I find the right blower to order.
Thank you so much for helping all us gals fix our dryers! 🙌🏻😀
This video is legit! First one that showed the inspection of the blower housing and assembly. Upon inspection found a paint can opener that must've fallen into the lint trap area and jammed the blower wheel. Problem solved! No thermal fuses blown luckily. Thanks Ben!
Thanks. My 16 year old just fixed the dryer. Works great and he got to keep the 92 cents in change he found inside.
This video was EXTREMELY helpful in diagnosing what was causing the noise. It ended up being a deteriorated rotor wheel.
I ordered the parts through your link. Received them in 4 days. Followed your instructions and the problem is solved. Thank you! My dryer is a Maytag Dryer MGDC215EW2.
Thanks. Have this same exact model. Had it apart twice. Cleaned it up and lubed the rollers. Helped for a while. Ordered repair kit at your website today.
Hi Ben I don't comment on many videos. But you do a lot in a short video. very well explained and great tips. thank you
It means a lot buddy!
You saved me quite a bit. Had a loud whining noise and thought i was on the verge of a new dryer. Took the dryer completely apart per your instructions. Vacuumed and cleaned the inside....Back to normal.
Thanks
Not a problem!
Thank you so much for this video! our Maytag dryer started making noise. We took the back side apart as shown in the video, and man! there were so many broken items (pencils, legos, jewelry, etc). After cleaning it all up the dryer is working as when it was new back in 2017. Next year we will check the front side and buy the kit.
A helpful video! The first time I watched, you made me realize the importance of removing the back panel and cleaning that area. I'll be doing that seasonally from now on. I purchased your kit because my Maytag dryer was making a loud thumping noise, along with its signature squeak. While that makes for a wonderful beat for a background track, it's not conducive to a healthy appliance. I received the repair kit in 2 days (absolutely amazing!) and successfully fixed my dryer. All the parts fit perfectly! For anyone reading, I have the Maytag dryer model MEDC215EW1. Thank you, Ben!
In my opinion, that is the best dryer design ever!
I love them. I could fix tem blindfolded
@@bensappliancesandjunk you would think the other manufacturers would get the idea
Thank you! Just taking it all apart and putting it back together seem to somehow fix the banging around. The only tricky part was putting the beltloop back through the the idler pulley as your wrist was in the way for those crucial few seconds. Eventually got it figured out through trial and error and a bit of knuckle skin. Thank you, your video was extremely helpful and got the job done!
Thank you so much for this info. My noise turned out to be one of the rollers. Easy fix with this video.
I remembered how hard it was to get those DRAT tri clips off while replacing the wheels. WOW!!!
Thanks for this vid that took me down memory lane.
Cheers from S. CA
Your pro tips were second to none. A pick set from harbor freight worked great for the wheel retainers.
Thank you so much for this clear, speedy and thorough tutorial! Our dryer was banging and followed your instructions (besides having to change any belts luckily) and got it to work like new! Thanks again
I'm glad it helped you!
Thank you for this amazing tutorial and parts listing!! I ordered the parts before even openings my drier hoping to just replace it all in one go. Turns out that hair got between the inside of the roller wheel and the shaft, rubbing DEEP grooves in both, so now I am waiting for my replacement left shaft to come in the mail to complete my install!
I totally fixed my dryer by watching this video! Ordered the parts kit in the link. Works perfectly. Thank you SO much for posting this. Saved us a lot of money!
Thank you for this well explained and clear video of how to change out the dryer wheels. I followed your advice and got it done in 30min!
Your instructions were spot on. In what seemed like no time at all, the dryer was running smoothly again. Well done!
You sir are my hero, not only did you have the video showing how to, you link the parts I need. Hell yes. Mine was a bad lower roller wheel but if I replace one, may as well replace it all
Awesome video dude. Helped me so much I found the issue in the blower. Half a broken pencil. Thank you for what you do. I greatly appreciate it.
You're welcome
This was a very helpful video. Thanks for the content. I fixed my dryer and saved what would have been an expensive service call. I also learned that it would be crazy not to take it apart and clean it every two years or so! Our dryer is in the basement, so cleaning out the vent hose will really help it be more efficient.
Absolutely wonderful step-by-step. I fixed mine thanks to you so thank you very much!
Dryer started making a loud grinding noise this afternoon with a load full of sheets in it. Thankfully I was able to just follow the first part of the video and retrieve a golf pencil out of the fan. Thank you!
Glad it was a simple fix!
Thanks a ton for this video. I watched a dozen others before finding yours and yours was by far the best video and exactly what I needed. I appreciate how you explained every step in the process and gave tips along the way to make it easier for us. I never thought I would be able to disassemble and reassemble a dryer!
My dryer was making an awful dog-whistle-like squealing. I didn't have any replacement parts so I just followed your video and cleaned the wheels (I used brake cleaner) and put the tiniest amount of lithium grease inside the rollers. I also cleaned the pulley and put the tiniest amount of WD-40 on it (not the pulley itself but its moving parts). It seemed to fix the problem as the dryer is running wonderfully now.
You might have said this but I would like to emphasize how sharp some of the metal edges are. When I finally got the front put back on I noticed I jad sliced two of my fingers (on different hands) on the inside of the front panel. It looked like a murder scene 😅 so be careful everyone.
Fixed my squeaking with your video! Thanks so much! Way easier than I expected it to be!
Way to go!
I gotta say i loved your video my man. We have same model and it was making some crazy violent noise and to be honest i still dont know what the issue was but i took it a part and put it back together and it seems to be working so ill take it haha. But your video really made things a breeze. If all appliances had repair videos like this I'd probably never buy another new one just keep repairing it. Gotta love right to repair.
This was one of the best repair videos ive seen in a long time. Thank you so much
Another excellent demonstration, filled with key tips and your fearless techniques. Thank you!
Thank you so much! We actually pulled the dryer apart and have the confidence to fix it! The link for the replacement parts made my day.
Super helpful video!! My dad and I were able to take our dryer apart and figure out what was wrong with no issues!!
I was able to fix my old Maytag PERFORMA gas dryer with this guide. Thank you Ben!
Ordered the parts from your video and replaced one wheel. Works perfectly. Thank you!!
Glad it helped!
Amazing video. Got my dryer back up and working like new! Thank you
My exhaust fan had broken pencil that had jammed. You pointed me in the right direction. Fixed and cleaned
Great video! Thanks to you, I was able to fix my dryer, which had TWO things wrong with it!
This is my exact dryer and im pretty sure my exact issue! Sounds like a thump as the drum spins. Thanks so much for this video!
This video helped me change out the wheel bearings on my Whirlpool dryer with relative ease. I'm bragging to everyone I know 😂. Thank you!
Ben, could you do a video on what appliances you have in your home?
Also, top 5 things you can do to prolong the life of each of your appliances.
Super helpful instructions. I did buy the kit but the belt was almost two inches shorter than the one on the dryer so I reinstalled that. Otherwise great stuff!
Glad it helped
Excellent how-to video, just perfect. Also loved the Metallica reference! Thank you!
Found enough change to pay for the Kit! Great video
Great video! Clear and easy to follow. Best of all, fixed my squeaky dryer!
I know the struggle of putting the front door back on and yes, I've dropped the screws down into the cabinet making me take it all apart again.
Great detailed to the point video! Thank you Ben! I am subscribed!
Love how I found my exact dryer in a video with the same symptoms that started on mine like 3 min ago.
Surprisingly simple inside! What supports the drum on the front while allowing rotation?
Just ordered the repair kit in the link, will update this post with my results after I install it.
Success!! I installed the kit today and the problem is gone. Thank you so much. BTW, I found about $4.00 in change inside the machine, a little reward for 90 minutes of my time to install the kit.
Thank you so much for this video! My dryer is back and it feels so good! Haha
Interesting video to say the least. I appreciate the time you give to do it. Does the dryer sound quiet now? Also I notice you didn't use a power driver on the screws. Is there a reason for that? Thanks for the video.
I just dont for videos because I usually want people to think "Oh, I can fix this with just a screwdriver!" but the next video that bit me because of dealing with a side by side fridge. Eventually I'll probably just switch permanently to a power drill on everything because its just soo much faster on and off camera. We always try to use drills off camera, but on camera I've tried to make it simple.
Dryer is quiet now and sold already
Dude, thank you. Just save me a new dryer. Bought the kit thanx alot
This video was perfect man but I’d say to put the drum on the back pulley first too. That part was causing me a huge problem. Other than that this video was amazing. I wish I was rich so i could send you some money for removing the stress I just went through. I hope you receive good karma for being a good person. Asap.
May Christ bless you for all your days
😄...i caught the St Anger Metallica jab....reminds me of a similar post when you said "first lets chk the drum for trash that can make the noise and get rid of it" ...and you tossed the St Anger cd...lol classic 😎
Helpful. But folks, when you take your dryer apart, pay special attention to the blower seal (gasket where the front of the dryer meets the blower fan). Mine was stretched out beyond re-installation. The replacement part for my Maytag MDE4000AYW is no longer available new. I lucked into a resale of one on ebay, but if I hadn't found a suitable replacement, replacing the drum rollers/axles, drum belt, and felt seal would have been too much time and money down the drain. Be forewarned and check your blower seal to find out if it is still in good shape before you open up those replacement parts.
It was the blower wheel for mine! Thanks a ton!
You have another sub! lol
Have you done a video on freezers? I wasn't able to find one in your list...but I'm a dummy on computers, so it's possible I missed it.
If not, could you? I am thinking: Upright vs Chest, Brands, Expected Longevity, etc. Also, how to repair if they still run but act more like a fridge than a freezer.
I live in remote-ish Alaska, so having large freezers is very important to us.
Thank you sir, you certainly have the gift of teaching!
Helped me fix my dryer , thanks for sharing 🎉
Great reference right off the bat! 5 🌟 review.
This was extremely helpful, thank you!
I love you! Thank you thank you for this video! You fixed my problem! Thank you again!
Glad it helped!
This was fantastically helpful.
Thank you for making this video!
Love this video. Was hard to find. But I will say dont u need to remove gas pipe and exhaust before unscrewing the back? Which I would never do o😏
5/16th... so 8mm. Great video. thanks
Great video!! Thank you 🙌🏻🙌🏻
great info. Note screw chips always looks to fall downs crip
Subscribed because you dressed the part
Nice work Ben! ⭐️⭐️⭐️⭐️⭐️
Thanks a ton. This was very helpful.
Great video. Do you have a video for a Maytag gas/propane clothes dryer that is making noise? Would the repair parts you linked be the same? (The lint screen is at front, after you open door).
Thanks!!
It's going to be identical including parts as far as I'm aware
that squeaking drive me crazy i spary White grease on the wheel shafts every 30 days it's
worth it to not hear that squeaking sounds thank god i have a older Kenmore dryer it takes about 20 minutes to do 😊😊😊
Hey! I like the St. Anger album lol
Awesome thanks for your great video 🙂 👍
Man, this guy looks like Tobias Tissen, who is a Canadian hero.
The similarity is uncanny!
Should the one on the left spin freely or only a little bit after being replaced?
Thank you so much. Your the boss.
good video and well explained
Great videos 👍
Hello Ben. Can you tell us what refrigerators are decent ?
I just did all of your steps and cleaned everything… I out everything back together and have no power? I’ve checked the outlet and there is power. What could I have done???
Love your videos! Your appliance recommendations have saved us time, headaches and serious money. I have an older Maytag Ensignia Electric Dryer Model No.: MDE8757AYW (the lint filter is inside on the lower front of the unit). Will the Whirlpool Dryer Noise Repair Kit work for this model?
Very helpful!
So glad!
Thank you soo much ben.
I like your videos. I don't own a washer or dryer, but if I did, I think I could possibly repair one. I'm a bit mechanically inclined.
Do you grease your roller bearings?
What to do about a loose door that is causing a loud knocking noise?
I have a top of the line Kenmore washer, top load, that won't drain on a regular wash. I have to move the dial to another setting, usually drain to get the water out. I'm a widow on a pension and can't afford a big bill to get it fixed. I'm pretty handy, so I'm wondering if I could fix this myself.
Probably, but I'd need to know the model before suggesting another video I may have done regarding that sort of issue.
@@bensappliancesandjunk
Thank-you, I will get back to you.
My Maytag centennial dryer has a issue where once it runs and for a while, if I open it to then close it and try to run it again, I hear a buzzing noise behind the timer selector wheel and it won't start up again until I unplug it and let it sit for a while. I bought a kit with all the sensors and the heating element and it didn't fix the problem. Any clues to what it could be?
Can you make a video showing how to fix a Maytag dryer the drum seal on the back is coming off and is not aligned!?
Sure, I will see if we can add that some time. We do a fair bit of felt repairs for sure.. Never thought about recording one.
@@bensappliancesandjunk thanks
Any thoughts on fixing newer model GE profile (model PTD60GBSR0WS) intermittent vibration from burner shield cylinder and back duct running up toward drum? There’s no missing screws or broken tabs from what’s shown in online IPC. The parts can be made to rattle just tapping on them.
Nice im going to try. Hard to find this.
Thank you for the great instructions! I was able to repair my dryer and it’s purring like a kitten!!!
Thank you👍🏽