For those of you torn between the two, go sit on them and test drive if they let you. The 400 was the choice for me, the riding position is more comfortable, better power band, 2022 or 2023 fixed the issues that are mentioned in the comments(so look for those years). It's really up to YOU to decide what YOU want out of your bike, so go to a dealership and see.
@ross4641 I haven't experienced problems on my one but I've heard ppl experience issues with their stock clutch. Although I did hav an annoying chirp at 9k rpm that I fixed by placing a rubber O-ring behind the horn to cushion it from the vibes
While both a great bikes, you can really see where Kawasaki is using that extra $500. Although they both are so similar that it really comes down to personal preference, because the prices are very comparable. I personally overall like the Ninja more, but there is truly no better sound in an entry level bike than the sound of the Yamaha R3. Of course, some of this stuff can be changed while you own the bike. But the end of the day, as long as it did what you excepted or you have fun doing it, nothing else really matters. Just remember that safety equipment doesn’t look stupid, what looks stupid is being in the hospital when you had the option to wear proper safety so please do that. And if you don’t have gear - budget at least $1k into safety gear. Make sure the other $6k you spent on the bike isn’t your last $6k.
N400 has design issues. Frame flexes at high speeds and bumps which causes strain on the engine block because it is part of a stress member with the chassis. That's why you will notice a lot of guys posting about coolant / oil leaks in their block or cylinder head.
@@OneTapKap I will actually buy Ninja 400 within 2 months from now, and yes, that's my plan, also full fledge exhaust that makes it lighter and sound better.
Someone should tell people that youre not walking out of a dealership paying $5200-$5600 for one of these. You will be paying closer to $6800-$7300 after all the dealership fees, taxes, etc and thats if you pay cash. God help you if you have to take a lien because motosport dealerships arent known for low interest rates. You'll end up paying $10000. Honestly theyre both basically the same bike. You get a hint more power with the ninja but the R3 is more rev happy. There really isn't much more too it. Yeah the ninja comes with a slipper clutch but at these low cc's you're rarely have your back wheel spin out unless you fuck up a downshift and thats if it doesnt burn out after 2k miles bc you bought a 2018/2019. Not to mention the R3 shifting is very prominent vs the ninja which is good for beginners. So it really doesn't matter. Get the one that speaks to you. You're be bored with it in a couple months and want a bigger bike anyway.
can somebody who tell me if the parts of the ninja 400 are way exensive than the parts of the R3?, because in mi country (Colombia) kawasaki sales their bike parts very expensive.
I have Yamaha R3 .The price for 2022 was 6550 €....made of plastic but super design and very expensive spare parts. Now in my opinion Ninja is better than my R3.
They're supposed to be cheap AF. They're low capacity budget motorcycles. Even ducati wouldn't make a low capacity motorcycle with panigale level build quality.
it's a wiser choice to start with 400, even if you might lose some money when trading up to bigger bike because you get bored with 400 fast, rather than saving money by starting with 600cc or a litre bike but end up paying more in hospital bill 😅
Once again Yamaha fails. For the price (In Canada), the Yamaha is in 3rd position : RC 390, Ninja 400 and R3 in last position. Yamaha is the crApple of motorcycle.
Man if only you could mix these two bikes together. R3 looks with ninja performance. It’d be the one
Engine swap and do some paperwork for it
I love this format, very simple and easy to understand head to head with the stats placed right against each other
What an incredible comparison vidéo. The better that i see on youtube.
Thank you 👏🏼
For those of you torn between the two, go sit on them and test drive if they let you. The 400 was the choice for me, the riding position is more comfortable, better power band, 2022 or 2023 fixed the issues that are mentioned in the comments(so look for those years). It's really up to YOU to decide what YOU want out of your bike, so go to a dealership and see.
hey, what problems does the 2021 or before ninja 400 had?
@ross4641 I haven't experienced problems on my one but I've heard ppl experience issues with their stock clutch.
Although I did hav an annoying chirp at 9k rpm that I fixed by placing a rubber O-ring behind the horn to cushion it from the vibes
I love this video format. Keep up the great work.
While both a great bikes, you can really see where Kawasaki is using that extra $500.
Although they both are so similar that it really comes down to personal preference, because the prices are very comparable. I personally overall like the Ninja more, but there is truly no better sound in an entry level bike than the sound of the Yamaha R3. Of course, some of this stuff can be changed while you own the bike. But the end of the day, as long as it did what you excepted or you have fun doing it, nothing else really matters. Just remember that safety equipment doesn’t look stupid, what looks stupid is being in the hospital when you had the option to wear proper safety so please do that. And if you don’t have gear - budget at least $1k into safety gear. Make sure the other $6k you spent on the bike isn’t your last $6k.
R3 all day the sound and the design already top notch
I’m R3 Yamaha lover but sorry to disappoint you Ninja is better
Drag race torque hp ect
Also, R15 sells so much, and so many features that the road presence of the R3 is overshadowed, Feels undercooked and underestimated. and looks equal.
@@wuvvbernardo9353 we had different taste
@@jonathan6935 r3 for life homie but I have a ninja 😭
Update ! I actually lose to Ninja 400 in track race today 😒
_still will choose the R3 coz ridden both. R3 is the better overall performer imo._
Why's that?
@@EverythingisFire I've tried both now and the 400 is better.
N400 has design issues. Frame flexes at high speeds and bumps which causes strain on the engine block because it is part of a stress member with the chassis. That's why you will notice a lot of guys posting about coolant / oil leaks in their block or cylinder head.
Cases are small. Plus the newer model ninjas addressed and fixed the problem with the 2022s and the upcoming 2023 I’m pretty sure.
The Asian version of the ninja is not restricted that can output 49hp.
@@Balmung812 Indian version is sadly restricted, so its just 44hp.
@@kestrel3509 send in ur ecu get it flashed and then get air flows from TST boom 52 hp
@@OneTapKap I will actually buy Ninja 400 within 2 months from now, and yes, that's my plan, also full fledge exhaust that makes it lighter and sound better.
Yes, finally Ninja 400 vs R3
Someone should tell people that youre not walking out of a dealership paying $5200-$5600 for one of these. You will be paying closer to $6800-$7300 after all the dealership fees, taxes, etc and thats if you pay cash. God help you if you have to take a lien because motosport dealerships arent known for low interest rates. You'll end up paying $10000. Honestly theyre both basically the same bike. You get a hint more power with the ninja but the R3 is more rev happy. There really isn't much more too it. Yeah the ninja comes with a slipper clutch but at these low cc's you're rarely have your back wheel spin out unless you fuck up a downshift and thats if it doesnt burn out after 2k miles bc you bought a 2018/2019. Not to mention the R3 shifting is very prominent vs the ninja which is good for beginners. So it really doesn't matter. Get the one that speaks to you. You're be bored with it in a couple months and want a bigger bike anyway.
Can you make video R25 vs Ninja 250?
You can check on his Instagram account
The best review I have ever seen
I love the look and sound of the R3, but I love my Ninja 400 more.
can somebody who tell me if the parts of the ninja 400 are way exensive than the parts of the R3?, because in mi country (Colombia) kawasaki sales their bike parts very expensive.
sim, são muito caras, no Brasil tambem são caras...
I am waiting for R3 version 3.
Inspiring R series looks
Great video
why my zx25 51ps if drag with R3 always lose?.
R3 has higher torque,u could beat r3 in longer track with no problem
Bro r3 win drag race cuz higher in torque but on top end race zx25r wins
Yam can't overcome the power and torque advantage of the Ninja. Needs to be a 400.
True
No bias no bs I love it
I have Yamaha R3 .The price for 2022 was 6550 €....made of plastic but super design and very expensive spare parts. Now
in my opinion Ninja is better than my R3.
thanks for sharing. love the sound of the R3 but like everything else on ninja
well made video !!!
It basically comes down to Either you Like Power or Look
Nice video
I had a ninja 400 for beginners sports bike and expressway legal in Philippines
naols
Hello!
Congratulations on the channel! Could you do a comparison between BMW 850 GS versus Triumph Tiger 900? Thank you!!!
Cbr 250 rr sp qs vs R3 comparison vedio
Please reply 🙏. How can edit a video like this !?
right tool, practice and passion on editing
I Choose the Ninja 400 because its better 🔥🔥🔥🔥
What is your source of video editing?💙
Amigo. Comparación de la kawa ninja 400 vs sr 450 cf moto
Could you do a zx14r vs h2sx
Indian vs Harley. All classes please
request comparation naked bike 150cc...
I like R3 old design headlamp
Dejando a un lado las prestaciones del motor, me iría más por la R3. Me gustó más su chasis y suspenciones
I like this beautiful Motircykle😊👍🏍🥇🎖
Does anyone have any info regarding the re-launch of Yamaha R3 in India
plsss comparison cbr250rr with 2 bikes in this video pls
5000$ ??? In Spain cost 7000$
In Roumania 6550 €
Yamaha R15 v3 Video Please.... ❤️✌🏻
No hate to Kawasaki, but Ninja 300 and 400 looks so cheap AF
They're supposed to be cheap AF. They're low capacity budget motorcycles. Even ducati wouldn't make a low capacity motorcycle with panigale level build quality.
@@headhunter531 No USD forks, no aluminum swingarm, cheap quality frame etc.
@@akshayakumarbehera5840 well, for the USD forks, kawasaki is known for not adding them to budget bikes.
I bought a ninja 2023 and after about one week I realized I need to upgrade..... if you ever drove a manual before it will happen to you too.
it's a wiser choice to start with 400, even if you might lose some money when trading up to bigger bike because you get bored with 400 fast, rather than saving money by starting with 600cc or a litre bike but end up paying more in hospital bill 😅
Have to go with the R3 as it is almost 3000 euros cheaper as the 400
Please do a CFMOTO 300SR
Yamaha Tenere 700 stock, rally edition, world rally and all bikes enduro
Nice
Yeah compare r15v3 with a 400 too. 🙂
not same categ.
Указывайте 0-100, 100-200, пожалуйста!)
Always comparing Yamaha's bike with higher cc bikes... Why?? If Yamaha had this 400cc, remaining bikes will taste the ground 🤪🤪... #yamaha_fan_boy😎😎
"IF"
That's what you think .
Waiting For the Best Beast
CBR 250RRR
Sound r3 best
i need the 450rs of cfmoto :s
Bmw G310RR vs KTM 390RC
he in spain ninja 400 is cheaper than r3, i dont know why
This video is glitch
Cbr250rr Vs r3 please.
FINALLY
400 all the way
Really the r3 will prize 5300?😳
I payed 6550
@@prettyfog2379was it worth it ?
Ninja 400 it's ugly and lazy, one good thing is the engine
Blurry
same thought my browser does
H2r
Perfect starter bike
R3 weight is 170 kg, not 167.😂
Viva japan
Er6n
Que absurdo 5k lá fora e aqui nessa merda de país custando 35k ridículo
Não é bem assim...😂 tem de fazer a conversão de euros para reais
@@PerciJackson1 não amigo e bem assim sim, eles ganham em euros então não existe conversão 🥱😅🤣🤣🤣 MDS cada uma
Kawasaki
Once again Yamaha fails. For the price (In Canada), the Yamaha is in 3rd position : RC 390, Ninja 400 and R3 in last position. Yamaha is the crApple of motorcycle.
R3 is a chick bike.