I bought this Harness in early 2020 and here is my list of issues. 1. I should have opted for the 4-6 channel loop back. 2. I didn't realize how much more sound I needed. 3. Best product ever. Gonna spring for the loop back one very soon. Thanks for the harness
Just installed this harness in my sons 2016 Ram. Formally having over 20yrs of professional install experience. I can say the build quality of the harness is outstanding. The harness is put together very well. It’s 100 percent OE quality if not better. If your integrating an amp or other audio accessories in your Ram I would highly recommend this harness. It makes the whole process extremely easy. Be patient after you order because they are built to order but definitely worth the wait!
I have a 2014 ram 1500 with the 8.4 radio with no navigation. What harness do I need to add a sub amp and possibly another 4 channel amp for the door speakers ?
Hey there i have a 18 ram Laramie longhorn,3500 .id like to add subs and amp and retain my factory head unit what do you have that will keep the factory sub out level at the box from fading out? I ask because it what happens on my other 18 Laramie 3500 (not longhorn) and i want to fix that one as well(wife’s truck) thanks!
Hello Daniel, for something like that I would suggest our R2G T-harness with a linkDQ. This loc has a parametric eq built in ot that allows you to correct any bass roll off and remains all factory functions as is. You could use the same harness in both vehicles so long as you dont have the alpine or H&K systems.
So this indeed works without any issue with uconnect and the factory alpine system, i just need to plug in and play and replace the factory sub box with the fox box and subs/ amp i want.... zero issues all plug and play
I have the the same head unit. I was going to tap into the rear speakers, and then I saw this. Which channels does this configuration in the video tap into? Fronts? Rears?
Hi Erin, yes it sure does . it sounds like you are doing a full system install. we would recommend that you do an LC7i or an LP7-4. the LC7i will grant you bass restoration and power level adjustment for the amps to operate at optimal performance. the LP7-4 is a more budget friendly unit that supplies you with sufficient signal to operate well.
Hey there so I have a 2019 ram 1500 and them I put the T harness on it so I can add an amp for bass and now when I turn off my truck the amp doesn’t turn off, the amp is straight on doesn’t turn off, so I have to disconnect from the battery so my question is can you give me han with that?
I have a 2014 ram 2500 mega cab limited with 8.4 uconnect and alpine sound. I have a mono amp and 2 subs that I want to install. I also have a set of tweeters that I want to install but would I have to wire the tweeters to the factory amp? What would I need? Could I possibly get a link?
Hello, we have a t-harness for the alpine system that you can use to add the mono amp. As for the tweeters, Yes you can wire them into the alpine system or you can use something like an lc2i that will provide both a low frequency for the mono amp and a high frequency for an added amp you can use for the tweeters. lljcustoms.com/store?olsPage=products%2F2014-2019-gm-bose-amp-t-harness-1419gmbose
Once I plug in the amplifier it’ll go to the speakers? If I wanted to add tweeters I’d just splice the front speaker door wire and run it to the tweeters?
Hi billy,this is a T-harness and would not affect your factory system it will just give you the audio signal for a mono amp and remot on. If your amplifying your speakers you would take the signal from your tunning and send that to a crossover or direct depending on if your doing an active system or not.
So I went to the website and not being an audio file it was kind of hard for me to decipher. I need a harness for a 2015 Ram 1500 and I want to amplify my door speakers dash speakers and a sub so which harness would I need?
I have a 2015 ram like the comment below. I had my subs in my 02 ram with an aftermarket head unit with RCA ports. Going to buy this kit for my truck but unsure of what selections i need to make on the website. 2 12s with a 2000 watt amp. Rca cables are already long enough to go to the head unit, and it had a blue wire too, but don't remember whats its used for. Any help is greatly appreciated!!
If I was to unplug the harness would the security code have to be put in? I want to do this to my 2017 ram but I cannot find my 5 digit code..on the video your radio came on after replacing the harness...did you edit out the code?
you will want to remove the ground from the battery. if you need the code you can call dodge customer support and with your vin they will help you out. we di not have to deal with the code because we disconnected the negative on the battery.
I have a 2014 Durango with a 2015 8.4 uconnect radio, from out of a dodge ram wanting to add subs, which connector would you recommend thanks in advance
Hello our Ram t-harness will work great for what your looking to do. with an lp7-2 lljcustoms.com/store?olsPage=products%2F2013-2018-dodge-ram-t-harness
Hello Twinz, currently the ram harness is out of stock. But you can visit our website and type in ram in the search bar and look at our Ready2Go harness
Hi Keith, you can check for an amp in the vehicle. It would be located under either of the front seats. If you have any questions please contact us at support@lljcustoms.com
Hello Coop that style harness has been changed to our elite syatem and the link will be updated today.lljcustoms.com/products/2013-2020-chrysler-elite-harness?_pos=4&_psq=Ram&_ss=e&_v=1.0
Our loopback system design uses a combination of our shock-wire and factory wires to feed the aftermarket signal back into the factory speakers location from the aftermarket amplifier output
Maybe I missed it in the video, but he states 2013-17 Ram. Description says 2018...The 2018 has (4) noise cancelling microphones in the headliner. will this harness bypass those?
Hello Shawn, i don't believe we had the ram anc when we did this video. However the ANC is under the seat and uses a separate $13.00 harness to bypass it. The T-Harness is just for providing signal
What do you recommend I should add on my 2017 ram 1500 I have the factory 8.4 unit, alpine system which has factory subwoofer and amp. Should I just tap into the existing amp and run a line output converter onto it?
I want to add subs on my ram for now just like on the video. but in the future I would like to amp the rest of the speakers, what would I need to add when I decide to do that? ( So that I have another 2 RCA's for the speakers amp)
In that situation you would want to get a Loopback harness and tie it together at the ends to close the loop and wire it into a link2 that will give you rca out for you to use. you can then open the loop and add a link6 when you want to add your amp for the doors and dash.
Hi Mark, we would need to check the connectors in the vehicle to verify this harness would be compatible. If you can email us at support@lljcustoms.com, we can help you out. Thank you!
I've got a 19 ram big horn with the 8.4 uconnect and the 6 speakers. I want to replace the speakers with aftermarket speakers and amplify them. What would you recommend?
Zpwslayer , I just bought a 19 ram bighorn with the 6 speaker and Uconnect. Does yours sound like complete shit? When I turn my volume up it doesn’t get any louder after 20. It sounds extremely distorted after 20 or so. Are you experiencing the same issue???
I saw a lot of different opinions on your website. I don't know what option to get for my vehicle. Can I call your customer service line for more detailed help?
My question is if I buy the t harness !! Would I be able to put one amp for the small speakers plus I’ll add another amp for the bass plus I have equalizer and separate epicenter !! ?? What do I really need for me to make all this work ?
Hello Anthony, for your project we would recommend a Loopback Harness instead. This will have a signal side which will feed into the LC7i and a return side which would be wired to the output side of the 4ch amp, taking that amplified signal back to the speakers, via the factory wiring. I will send you a direct link to the harness, if you have any questions please send us a chat through our website. lljcustoms.com/collections/dodge-jeep-ram/products/2013-2020-chrysler-elite-harness
2014 ram 1500 basic stereo system. So far I have mounted and wired for power and ground a alpine 4 channel amp for 4 door speakers, and 1 mono sub amp. So 2 amplifiers. Would LP7-4 work good? Or would you a LC2i work better? I bought a LP7-4, but I'm worried I might need LC2i. What would be difference between the 2? Thanks for any info.
Hello Glock, for what you are doing and LC7i would be a bear minimum you should be doing. if you do a 4 channel unit you will loss tuning options, also if you tap the 4 front speakers per example you will amplify them in the rear or vise versa. the main deference between the two is the technology and frequency response. The lc2i is the top of the line as far as LOC units go.
@@lljcustomscaraudiofabricat7854 2014 ram quad cab base 6 speaker system with 5.0 uconnect. No factory amp. No factory sub. Wanting to hook up lc7i to 2 amps. 1 4 channel and 1 mono. Read somewhere people were having trouble when they didn't have speakers hooked up to factory radio. People have no trouble just adding loc to add subwoofer amp. But do I need resistors if remove all speakers from head unit to power them with amp? Thank you for your time. I appreciate it
I have the bigger uconnect stereo that controls HVAC and pretty much everything, which harness do I use and I dont have factory alpine no amp no sub that's why I wanna add subs and amp.
does this works on my 2017 Ram rt with alpine head unit? because i went to your page and it says it doesnt work with alpine stereos so im confused help please
question with some professional help. I have 2018 1500, no Alpine system. I upgraded the 6 speakers and now I want to add a sub. Technically I want an amp or amps to power everything. What harness should I use and how many amps? (One 5 channel, two 4 channels, two 2 channels etc. anyone help me please Thank you.
what harness should I use....LOL that's funny, ha ha ha ! Yer gonna git yerself the maestro harness made for the rr module I think its ch3 and yer gonna have to tap the speaker leads and hook em to a speaker line level output thingy and than run rca to the amps and than run the speaker wires to yer speakers how ever you want! or did you even watch this video??? have fun tryin to do it yerself..
Hello Jacob, if you are just adding subs you would use a T-Harness with a link2 if you are doing 2 amplifiers i would suggest the link6 or lc7i with our Elite loopback design
@@lljcustomscaraudiofabricat7854 Hey sorry one more question, I bought the elite T-harness will i need any additional wire to connect to the link2 or is it plug n play? Thank you
Anyone install on a 2020 Dodge Truck of any Ram,Rebel or big horn? Need to know if able to with all the new screen/radio and all truck computer pcm etc..
Hello Joseph, we offer solutions for the 2013 and 2021 regardless of the factory options we just need to know if you have a factory amplifier or not because they are different connections. You can always text us or email us. 602-320-7004 or Support@lljcustoms.com
yes Emilio, this harness will let you add your aftermarket amp, it will supply you with RCA and remote turn on . lljcustoms.com/store?olsPage=products%2F2013-2018-dodge-ram-t-harness
yes all factory systems have bass roll off. however this tends to be at or past the point of distortion. If the system is properly tuned you do not need to factor in the roll off
Hello, the harness you would need is the T-harness with the LP7-2 . This harness will supply you with low level (2.8 volts ) of low frequency signal along with the remote turn on for your amp. lljcustoms.com/store?olsPage=products%2F2013-2018-dodge-ram-t-harness
Hello Rigo, for the alpine systems you would use our Alpine amp harness. this harness connects at the alpine amp. lljcustoms.com/store?keywords=alpin&olsPage=products%2F2014-2019-gm-bose-amp-t-harness-1419gmbose
Hi Michael, If the vehicle does not have an Alpine or Beats system, yes. You will want to check the year range on the product description to verify it works for your vehicle or send us an email to support@lljcustoms.com/
I bought this Harness in early 2020 and here is my list of issues.
1. I should have opted for the 4-6 channel loop back.
2. I didn't realize how much more sound I needed.
3. Best product ever. Gonna spring for the loop back one very soon.
Thanks for the harness
Just installed this harness in my sons 2016 Ram. Formally having over 20yrs of professional install experience. I can say the build quality of the harness is outstanding. The harness is put together very well. It’s 100 percent OE quality if not better. If your integrating an amp or other audio accessories in your Ram I would highly recommend this harness. It makes the whole process extremely easy. Be patient after you order because they are built to order but definitely worth the wait!
Where can i order this harness
@@damiancastro2906 I was about to ask the same question, have you found where you get this?
@@cameronriegling2804 i have not
Need a video for the alpine harness, with lc7i
sold out on website please help
Great video and Break Down
I need this t harness with the bass control knob how do I order it
I have a 2014 ram 1500 with the 8.4 radio with no navigation. What harness do I need to add a sub amp and possibly another 4 channel amp for the door speakers ?
Hey there i have a 18 ram Laramie longhorn,3500 .id like to add subs and amp and retain my factory head unit what do you have that will keep the factory sub out level at the box from fading out? I ask because it what happens on my other 18 Laramie 3500 (not longhorn) and i want to fix that one as well(wife’s truck) thanks!
Hello Daniel, for something like that I would suggest our R2G T-harness with a linkDQ. This loc has a parametric eq built in ot that allows you to correct any bass roll off and remains all factory functions as is. You could use the same harness in both vehicles so long as you dont have the alpine or H&K systems.
t-harness.com/products/ram-radio-t-harness-2013-2020-r2g
U still make these?
We do still offer this T-Harness, however they are out of stock at the moment.
@@lljcustomscaraudiofabricat7854when will you restock them?
@@kierannolan7968lmk if you find an alternative lol can not find either
Will this work with the Uconnect 8.4 factory radio?
cjr4497 yes. I just installed this harness and all factory functions are retained
12MotoDad what harness did you buy?
will this harness work for the 8.4 uconnect as well?
Yes it will
@@lljcustomscaraudiofabricat7854 where can I order this from
So this indeed works without any issue with uconnect and the factory alpine system, i just need to plug in and play and replace the factory sub box with the fox box and subs/ amp i want.... zero issues all plug and play
How do I get this specific harness I tried looking on your website but I didn’t see anything
This was replaced by our R2G and R2R line. You can get it on our site or at T-harness.com
I have the the same head unit. I was going to tap into the rear speakers, and then I saw this. Which channels does this configuration in the video tap into? Fronts? Rears?
Trying to put this on my tow truck same truck and year. Hopefully it works for basic amp and sub
Hi Erin, yes it sure does . it sounds like you are doing a full system install. we would recommend that you do an LC7i or an LP7-4. the LC7i will grant you bass restoration and power level adjustment for the amps to operate at optimal performance. the LP7-4 is a more budget friendly unit that supplies you with sufficient signal to operate well.
Hey there so I have a 2019 ram 1500 and them I put the T harness on it so I can add an amp for bass and now when I turn off my truck the amp doesn’t turn off, the amp is straight on doesn’t turn off, so I have to disconnect from the battery so my question is can you give me han with that?
Is this the loopback harness??
Is this harness not available anymore?
@@ne634 t-harness.com/products/ram-radio-t-harness-2013-2020-r2g
Just ordered one of these off your website but I got the LP7-4 how long does it usually take to get delivered?
???
How long did it take. I ordered it and I don't think it's even shipped yet
@@robchesla3405
When I ordered it took over a month and a few concerned emails before it was even ready.
I have a 2014 ram 2500 mega cab limited with 8.4 uconnect and alpine sound. I have a mono amp and 2 subs that I want to install. I also have a set of tweeters that I want to install but would I have to wire the tweeters to the factory amp? What would I need? Could I possibly get a link?
Hello, we have a t-harness for the alpine system that you can use to add the mono amp. As for the tweeters, Yes you can wire them into the alpine system or you can use something like an lc2i that will provide both a low frequency for the mono amp and a high frequency for an added amp you can use for the tweeters.
lljcustoms.com/store?olsPage=products%2F2014-2019-gm-bose-amp-t-harness-1419gmbose
Where can I purchase that harness and cost pls
At lljcustoms.com or at T-harness.com
Does this retain the back up camera too? What would I need if I was running two amps and needed two sets of RCA outs?
Patrick Chambers I just installed this harness. Yes you retain your camera. All factory functions are retained.
Do you guys make a harness for the earlier generation 2012 year trucks with the alpine system?
We did for a few years but no longer make them sorry
Once I plug in the amplifier it’ll go to the speakers? If I wanted to add tweeters I’d just splice the front speaker door wire and run it to the tweeters?
Hi billy,this is a T-harness and would not affect your factory system it will just give you the audio signal for a mono amp and remot on. If your amplifying your speakers you would take the signal from your tunning and send that to a crossover or direct depending on if your doing an active system or not.
So I went to the website and not being an audio file it was kind of hard for me to decipher. I need a harness for a 2015 Ram 1500 and I want to amplify my door speakers dash speakers and a sub so which harness would I need?
Will the pac work without the t-harness and out the little knob thing
I have a 2015 ram like the comment below. I had my subs in my 02 ram with an aftermarket head unit with RCA ports. Going to buy this kit for my truck but unsure of what selections i need to make on the website. 2 12s with a 2000 watt amp. Rca cables are already long enough to go to the head unit, and it had a blue wire too, but don't remember whats its used for. Any help is greatly appreciated!!
Hello tyler, you would want to select the lp7-2. The blue wire you your amp turn on signal.
LLJ Customs Car Audio Fabrication L.L.C got any coupon codes?😅
@@Tyler27B yes sir when you visit our site at the home page you get a 5% off when u subscribe
@@lljcustomscaraudiofabricat7854 Thanks! purchased! Cant wait to get my truck going!!
@@Tyler27B Thank you ! will have that to you ASAP
I assume I can do this with my 2015 challenger?
That is correct
If I was to unplug the harness would the security code have to be put in? I want to do this to my 2017 ram but I cannot find my 5 digit code..on the video your radio came on after replacing the harness...did you edit out the code?
you will want to remove the ground from the battery. if you need the code you can call dodge customer support and with your vin they will help you out. we di not have to deal with the code because we disconnected the negative on the battery.
I have a 2014 Durango with a 2015 8.4 uconnect radio, from out of a dodge ram wanting to add subs, which connector would you recommend thanks in advance
Hello our Ram t-harness will work great for what your looking to do. with an lp7-2
lljcustoms.com/store?olsPage=products%2F2013-2018-dodge-ram-t-harness
How can I get this same setup?
Hello Twinz, currently the ram harness is out of stock. But you can visit our website and type in ram in the search bar and look at our Ready2Go harness
Hi! Is there one for the 8.4 inch dash and alpine system for 2014 ram anywhere sold? Cant find anything through your sites
t-harness.com/products/ram-radio-t-harness-2013-2020-r2g
So I have a 14 2500 CC without the alpine system. All I want to do is hook up my RockFord Punch P300 powered sub. What will I need to buy? Thanks!
When will they be off of back order
They will be back in stock at T-harness.com on march 2024 and will have next day free shipping
I have a 2018 Dodge Ram 1500 Tradesman. How can I tell if it has a factory amp? Thanks.
Hi Keith, you can check for an amp in the vehicle. It would be located under either of the front seats. If you have any questions please contact us at support@lljcustoms.com
Where do I find the t harness I can't find it
Hello Coop that style harness has been changed to our elite syatem and the link will be updated today.lljcustoms.com/products/2013-2020-chrysler-elite-harness?_pos=4&_psq=Ram&_ss=e&_v=1.0
how do you get the speaker wire from the amp to the truck wires
Our loopback system design uses a combination of our shock-wire and factory wires to feed the aftermarket signal back into the factory speakers location from the aftermarket amplifier output
So if I just want to add 2 subs which one would you recommend?
Maybe I missed it in the video, but he states 2013-17 Ram. Description says 2018...The 2018 has (4) noise cancelling microphones in the headliner. will this harness bypass those?
Hello Shawn, i don't believe we had the ram anc when we did this video. However the ANC is under the seat and uses a separate $13.00 harness to bypass it. The T-Harness is just for providing signal
What do you recommend I should add on my 2017 ram 1500
I have the factory 8.4 unit, alpine system which has factory subwoofer and amp.
Should I just tap into the existing amp and run a line output converter onto it?
Hi Luis, we offer a T-harness for the Alpine system, this plugs into the Alpine amp. The option we offer works for the 12 speaker system.
@@lljcustomscaraudiofabricat7854 great thank you!
Will this work for a 2018 Dodge Ram 1500 Outdoorsman?
does this work for the touchscreen head unit?
Yes it does all they way up to 2024
I want to add subs on my ram for now just like on the video. but in the future I would like to amp the rest of the speakers, what would I need to add when I decide to do that? ( So that I have another 2 RCA's for the speakers amp)
In that situation you would want to get a Loopback harness and tie it together at the ends to close the loop and wire it into a link2 that will give you rca out for you to use. you can then open the loop and add a link6 when you want to add your amp for the doors and dash.
Will this work on my 2013 ram with factory 5.0 uconnect?
Hi Mark, we would need to check the connectors in the vehicle to verify this harness would be compatible. If you can email us at support@lljcustoms.com, we can help you out. Thank you!
2017 dodge ram 1500 sxt ?
What are you looking to do ?
@@lljcustomscaraudiofabricat7854 add amp and sub
What do I need to add amp and sub
@@rickmarshall8608 you would just need a simple T-harness with a linkDQ that will give you RCA outs and remote turn on
@@rickmarshall8608 t-harness.com/products/ram-radio-t-harness-2013-2020-r2g
can you connect door speakers to your amp with this device?
No that would be our Loopback Harness style. This is our T-harness design
I've got a 19 ram big horn with the 8.4 uconnect and the 6 speakers. I want to replace the speakers with aftermarket speakers and amplify them. What would you recommend?
Zpwslayer , I just bought a 19 ram bighorn with the 6 speaker and Uconnect. Does yours sound like complete shit? When I turn my volume up it doesn’t get any louder after 20. It sounds extremely distorted after 20 or so. Are you experiencing the same issue???
Yea, esp when I listen to music off of the usb media. It just sounds like ass.
I have a 19 ram as well... terrible stock audio, but not much on UA-cam about how to fix it yet either.
I have a 2015 durango 8 4 uconnect with beats audio. What harness can I use to integrate my factory amp and add a sub rca outpur
Hello there. I have a 2017 Ram 1500 with 8.4 Uconnect 6 speaker system and I want to add a subwoofer to it. What harness do I need?
the harness in the video, watch it
I saw a lot of different opinions on your website. I don't know what option to get for my vehicle. Can I call your customer service line for more detailed help?
Where can I buy this?
i have a 19 ram 1500 classic and want to add a kicker sub that has a built in amp into the sub box. can i use this for the wiring to plug into the amp
I do as well with the 8.4 uconnect bt like he said jst want to see if this harness will work as well
What's the part number for a 2015 dodge ram 1500 lone staR with back up cam and steering wheel control
For duel subwoofers and amplifier
you ever get any information on this ?
My question is if I buy the t harness !! Would I be able to put one amp for the small speakers plus I’ll add another amp for the bass plus I have equalizer and separate epicenter !! ?? What do I really need for me to make all this work ?
what you need is to go to a pro to have him install it
hi I'm looking to install lc7 I and 4 channel amp and mono with 2 subs ram 1500 gen 4 the t harness is all I need?
Hello Anthony, for your project we would recommend a Loopback Harness instead. This will have a signal side which will feed into the LC7i and a return side which would be wired to the output side of the 4ch amp, taking that amplified signal back to the speakers, via the factory wiring. I will send you a direct link to the harness, if you have any questions please send us a chat through our website. lljcustoms.com/collections/dodge-jeep-ram/products/2013-2020-chrysler-elite-harness
3:35 LMAO!
Does that work on a 2018 Ram 3500 that has an Alpine center speaker?
2014 ram 1500 basic stereo system. So far I have mounted and wired for power and ground a alpine 4 channel amp for 4 door speakers, and 1 mono sub amp. So 2 amplifiers. Would LP7-4 work good? Or would you a LC2i work better? I bought a LP7-4, but I'm worried I might need LC2i. What would be difference between the 2? Thanks for any info.
Hello Glock, for what you are doing and LC7i would be a bear minimum you should be doing. if you do a 4 channel unit you will loss tuning options, also if you tap the 4 front speakers per example you will amplify them in the rear or vise versa. the main deference between the two is the technology and frequency response. The lc2i is the top of the line as far as LOC units go.
@@drill6978 thank you. I appreciate the info.
Does ram 1500 2014 5.0 uconnect require resistors when you don't have factory wires connected?
@@joemikes325 that would depend on the year and the radio configuration of the vehicle. Also some loc units already have resistance built in to them
@@lljcustomscaraudiofabricat7854 2014 ram quad cab base 6 speaker system with 5.0 uconnect. No factory amp. No factory sub. Wanting to hook up lc7i to 2 amps. 1 4 channel and 1 mono. Read somewhere people were having trouble when they didn't have speakers hooked up to factory radio. People have no trouble just adding loc to add subwoofer amp. But do I need resistors if remove all speakers from head unit to power them with amp? Thank you for your time. I appreciate it
I have the bigger uconnect stereo that controls HVAC and pretty much everything, which harness do I use and I dont have factory alpine no amp no sub that's why I wanna add subs and amp.
Hello Daniel, here is the harness you would use :
lljcustoms.com/store?olsPage=products%2F2013-2018-dodge-ram-t-harness
I can't find the harness in stores. somebody could help me?
I have a 2018 dodge 1500 slt just wondering whats the difference between the lp7-2r and the lp7-2
Hello Brody, the difference between the 2 is that the LP7-2r has a gain remote and the LP7-2 does not.
Ok but it still comes with the wiring harness to hook up to the back of my stock radio without cutting wires
@@brodycoverchuk6556 yes sir that is correct
does this works on my 2017 Ram rt with alpine head unit? because i went to your page and it says it doesnt work with alpine stereos so im confused help please
Look around on their website. They have a different harness for the factory Alpine setups.
Do you guys have one for a 2018 ram touchscreen?
Hello, we have an option for the non-amplified system in this vehicle. What are you planning on installing?
@@lljcustomscaraudiofabricat7854 amp an subs
What did you end up doing i have same year
How do you hook up the speaker to the t harness
Does this work with 2016 chargers?
I have a 2015 with the alpine system and the factory touch screen head unit. What do I need?
Hello, you would need the Alpine Bypass Harness.
LLJ Customs Car Audio Fabrication L.L.C any link to the product ?
Do a 2019 Grand cherokee Limited X
What tool is that hooked to your drill my guy
It is the " dewalt right angle drill adapter "
Thanks
question with some professional help.
I have 2018 1500, no Alpine system. I upgraded the 6 speakers and now I want to add a sub.
Technically I want an amp or amps to power everything. What harness should I use and how many amps? (One 5 channel, two 4 channels, two 2 channels etc. anyone help me please
Thank you.
what harness should I use....LOL that's funny, ha ha ha ! Yer gonna git yerself the maestro harness made for the rr module I think its ch3 and yer gonna have to tap the speaker leads and hook em to a speaker line level output thingy and than run rca to the amps and than run the speaker wires to yer speakers how ever you want! or did you even watch this video??? have fun tryin to do it yerself..
Do they have a 4 or 6 channel harness?
Hey i have a 2019 ram 1500 ecodiesle i have the stock 8 inch touch screen i just want to add a sub
So when I use it for a mono sub it will not affect the front speakers?
Deal Farrell I just installed this harness and everything stays the same.
i have a question about that.i install your pac amppro ap4-fd21 in my 19 ram.now no sound flows thru my amp.just silence.
Hello that is not our harness the Amp-pro is made by PAC our harness does not have that problem
Where can i order this harness
Hi Damian, this harness is available on our website. Here is a direct link: lljcustoms.com/products/2013-2020-chrysler-elite-harness
I have a 2020 dodge 3500 and I want to ask you guys what I need to make my system go boom boom. please help.
Which loc do I need for just a mono amp
You can use a range of loc units . some are the lp7-2 lp7-2R or lc2i
Is the t plug needed to hook the pac up
No you can run your own wires from the signal source yo the pac
Do I need a an LP7i in order to use the LC7-2 ?? please help
Hello Jacob, if you are just adding subs you would use a T-Harness with a link2 if you are doing 2 amplifiers i would suggest the link6 or lc7i with our Elite loopback design
@@lljcustomscaraudiofabricat7854 Thanks a lot ! I just bought the T-harness with the link 2 on your website.
@@jacobatchison5238 awsome thank you. We will update you next week with a tracking email. Thank you
@@lljcustomscaraudiofabricat7854 Hey sorry one more question, I bought the elite T-harness will i need any additional wire to connect to the link2 or is it plug n play? Thank you
i bought them on two different orders just wondering if the harness with just plug into the link2 or if i would need to splice or crimp wires together
Anyone install on a 2020 Dodge Truck of any Ram,Rebel or big horn? Need to know if able to with all the new screen/radio and all truck computer pcm etc..
Hello Joseph, we offer solutions for the 2013 and 2021 regardless of the factory options we just need to know if you have a factory amplifier or not because they are different connections. You can always text us or email us. 602-320-7004 or Support@lljcustoms.com
I'm trying to add two subs and keep my stock radio on my 2015 ram. Is this what I need?
yes Emilio, this harness will let you add your aftermarket amp, it will supply you with RCA and remote turn on .
lljcustoms.com/store?olsPage=products%2F2013-2018-dodge-ram-t-harness
Thanks for a fast reply!!!
Do these radios have a roll off with their outputs?
yes all factory systems have bass roll off. however this tends to be at or past the point of distortion. If the system is properly tuned you do not need to factor in the roll off
LLJ Customs Car Audio Fabrication L.L.C
What volume level does these radios tend to distort?
Wherevdo you hook the subs
Wish you would have linked that setup instead of a bunch of bs other harnesses that regular diy people can’t understand all the shorty term slang shit
What’s the part number for this harness
its the: 1318DR
So what exactly do I need for a sub amp install it already has a gain adjustment knob just need something for RCA's
did you even watch this video?
@@IamGantz yes I did watch it I was wondering about the part numbers for their products and prices man no need to be a jerk
@@kyletrenton1411 hahaha just breakin yer balls assclown!
I need one for a 2020 ram with the 8.4 uconnect
Do you offer it in 2020 ram 2500/3500 tradesmen??
Yes we do this harness will take care of that for you.
I have a 2015 ram 1500 and I'm trying to run 2 12 inch subs and a 1600w amp. Which harness would you recommend?
Hello, the harness you would need is the T-harness with the LP7-2 . This harness will supply you with low level (2.8 volts ) of low frequency signal along with the remote turn on for your amp.
lljcustoms.com/store?olsPage=products%2F2013-2018-dodge-ram-t-harness
Are you able to use this with a aftermarket stereo?
Yes you can but shouldn't need it as your aftermarket should have RCA outs
Wtf us anc bypass? Says on sight have to pick yes or no but of course you don’t mention it here…
Can i order in Canada??
Yes you can. We ship world wide.
Can I run a lp7-2 and a lp7-4?
2018 ram 2500
Will this work for the 2019 ram classic?
Hi Dustin, yes it will as long as it does not have a factory amplified system.
Do u make an amp to fit a single can ram thx
What voltage is coming out of the rca plugs?
2v as he said in the video
Does this work on a 2013 ram 3500 with the alpine factory system?
Hello Rigo, for the alpine systems you would use our Alpine amp harness. this harness connects at the alpine amp.
lljcustoms.com/store?keywords=alpin&olsPage=products%2F2014-2019-gm-bose-amp-t-harness-1419gmbose
Does this work on Alpine premium sound Rams? If not is there something else that works?
16 ram 2500 with big screen factory radio. Added some infinity speakers and at higher volume they distort. Do I need an amp?
Does the t harness work on the 2500 2028 tradesman
Hello, what year is the vehicle?
Will this work on a 8in screen head unit?
Hi Michael, If the vehicle does not have an Alpine or Beats system, yes. You will want to check the year range on the product description to verify it works for your vehicle or send us an email to support@lljcustoms.com/