2016 Ram Big Horn Crew Cab. NON Amplified stock 6 speaker stereo & I don't have the ANC module under drivers seat. I upgraded to a full JL Audio system. JL RD900/5 amp (75W x 4 + 500W x 1), JL C2-600 6" components front and rear & the JL 10W3v3 Stealth Box. JL 4ga. amp wiring kit, JL 16ga speaker wire & 12ga wire for sub, JL 4ch & 2ch RCA's, Dynamat Sound treatment & a PAC AP4-CH41. Mounted the stealth box per instructions, ran new speaker wires THROUGH door boots (Pain in the ass but doable), ran remote turn on to deck along with RCA's. Ran amp kit thru firewall at the plastic cover next to the cable boot NOT thru the boot at the firewall. Mounted amp under rear passenger seat. Removed trim to access back of radio, unplugged the factory wiring harness and plugged in the CH41 to the radio and connected the factory wiring harness to the CH41. Connected the supplied remote turn on from the CH41 to the remote turn on to the amp. connected front/rear/sub RCA's to the CH41 and NOTHING ELSE. Set the dip switches per instructions and ran 2 "sleep" cycles at 5 mins minimum per instructions. Everything works as it should, however I am now waiting on a JL Twk88 DSP to add so I can fully get the sound I am looking for. IF you are NOT going to run new speaker wires then you will need to splice into the factory wiring per the supplied instructions, same if you are retaining the factory Alpine amp then you will need to use the secondary supplied harness with speaker leads that has the "AMPLIFIED" sticker on it and splice into your factory harness. The way I installed my set up, the dash speakers are NOT being used and when/if I choose to sell my truck I can take out my gear and reinstall the factory 6x9's to the factory quick connects, remove the CH41and do another 2 sleep cycles and the truck is back to factory with ZERO wires cut or spliced. I may do a video on my install (Would be my 1st ever YT upload).
Please update the video, this model pac4-ch41 is only for amplified systems, if your truck only has an ANC (gray looking amp, not black) then you must get the pac4-ch41 R2 !
Up to 2021 ram so far with Alpine, HK, or non ext amp you still use CH41. It's simply the beat way to get your preouts without amplifying the chime sound and confusing the canbus network. Also the 2 sleep cycles are only for vehicles with no factory amplifiers when you have to change the one dip switch
Maybe a stupid question ,but where/how do you hook up the loose wires/speaker wire coming off the the back of the module. You didn't show explain that part . Any help would be appreciated
Well you would run the audio from the pac thru the rca cable to the amp. You amp would have the speaker wires (start), run them to the doors (thru the door harness) to the speakers. All the warnings etc from the factory are still sent out, just not amplified from the factory amplifier. Can't really give you a direction or place to run your speaker wires because it depends on where your amplifier is mounted. So if your amp was under your seat you would run it from under your seat into the doors. But if your amp was in your trunk you would have to run it from your trunk into your door speakers.
Great video, quick question. I'm thinking on upgrading to the Phoenix 13.6 tablet radio, do I keep the ap4 or eliminate it because it has the wires fot the subs etc.
Does the pac amp pro module jus mount or sit behind the radio? Hoping it fits behind there and you don't have to mount it outside the radio or something
Thank you for that video. Im getting ready to do the same thing but in a 2020 Challenger with Alpine factory amp. Is the programming the same for the module for the Challenger? Also do I suppose to tap in to the factory amp? I'm new at all this but excited to do it. I have the AP4- CH41 and PAC APH-CH01 Harness.
What's the benefit of going with the amp pro vs going with the lc5 or lc7 audio control? I've honestly been going in circles with this. I have a 2019 challenger non amplified system, but I want to keep the factory head unit and add possibly 2 amps.
I have a 15 ram alpine factory system... front 2 door speakers were loud at one point.. then muffled out to only bass...my friends ram with the same system ..his door speakers are loud..I replaced the speakers and same thing
Same. This bypasses the amp. Unfortunately the speakers and existing subwoofer will not power by themselves when you install the pac4 so you will have to add an amo for your speakers and an additional amp for your subwoofer. Minimum $1000 with a digital sound processor or everything will sound like a tin can. Trust me
I had a local installer install an amp for just the subwoofers, they cut the ANC wires, I wish they would have watched your video, so now I’m looking at upgrading the all the doors and the dash speakers, and add another amp for the highs, what speakers would you recommend for the doors and the dash, also an amp for the highs?
Finally getting around to buying these parts to start my own install in my 2021 2500. I havent had a good system in a car since I had a 2002 eclipse fully done up and with about 100 pounds of sound deadening in it lol. Really excited about this! The video helped explain a ton, thank you! Did the pac ch41 have a T harness that you ran the amplifier signal back out to for the stock speaker wires or did you run all new wire? Thanks JP!
Hey buddy, my truck I did the same thing this guy said about putting the number for switch down and I did the two deep cycles but only my rear speakers are the ones that are playing and they played loud at volume number one and all the way up to 38 do you know how to fix this issue I have a 2021 ram 2500, Big Horn 8.43.
So last year I did an install on my 2015 ram 1500 crew cab tapping into the stereo wires with a hi low converter it did not work . Can you explain why I have looked over the internet for days and there is not much information. I have a 8.4 uconnect radio I'm about to throw into the street and buy a Tesla style radio . This module you installed cost 350 on Amazon why should I not just replace the radio with a aftermarket?
Hey. Please help!! I want to install in my 19 ram (alpine with anc) and I only want to add subwoofers, at the moment at least. will the factory door speakers still work if I connect this or will I have to add a 4 channel amp for them as well? also because it is amplified what do I do with the 4th switch? any advice is greatly appreciated ty.
Good info, Quick question, are you getting any clipping when your at a high volume for a period of time? Do you know if there are any updates for the PAC unit?
I'm trying to install this AmpPro in my 2020 Ram 1500 non-amplified, I ran the sleep cycles and get a solid red light but doesn't flicker when I turn the knob and I have no sound. On the harness behind the radio there are speaker connectors but one is labeled "for amplified only" and the other doesn't say anything. Am I miss something to get my sound or would I have to run an amp to all door speakers?
Is it normal to hear a slight static or hiss once this is installed? Just had 2 amps installed a 4 channel and mono, new door speakers, and cut wires to anc.
Crutchfield says this wont work for 2021 ram 2500. It all looks the same im just not very experienced with this kind of stuff. Just looking for some assurance as to if 21 ram is the same or not.
How do I install the speakers and tweeters? Do I just 1,cut factory speakers out and splice new speakers/tweeters to the factory harness on all 4 doors. 2, connect the PAC CH41 to my radio and from the pac module run the front and rear rca cables to my amp powering the 4 doors and 1 rca from the pac to my sub amp. 3, just connect the CH03 harness to the ANC under the seat and that’s it?
So do you have to have that adapter too get rcas? This audio shop is positive that I don’t and gave me this adapter that requires you to splice into wires. But I can’t find a wire diagram anywhere! Help
I have a 2019 ram basic stereo w anc under seat. I have a powered sub to install. I bought the pac ch1 anc bypass. Can I just plug that in my anc device then run my kicker loc device off the anc bypass then of course my amp rca off it?
I don’t have alpine system. How do I add a 4 channel amp to this pac? Went thru the cycles and have no sound. I see now that I need an external amp for speakers how do I run it?
Hey thanks for the video. I thought you were supposed to cut the black plug off and run your speaker wires from your amp to it? That what it says in the documents
Maybe you can help, I just installed this in a challenger and seems like I have less bass than when I was using a LOC, I even reconfigure my gain to my subs. Im using the bass knob and its turned all the way up, and was turned up when i set my gains. Any ideas why my bass seems less, Im set at 5 volts
Oh man i like you video so much, i need your help you know I’m trying to change the speakers to my 2019 ram big horn, in fact i want to upgrade all the sound
I'm not sure if this was already answered, but I only want to power a mono amp for my subwoofer. what switches do I flip on or off on the pac ap4-ch41 so I can use the amp for my subwoofer? also, will powering the amp be as simple as hooking up the power cable to the battery and ground cable to ground, or do I need to buy something else to hook into power?
Quick question hopefully you can help me I have the same exact vehicle 2019 ram non-amplified factory unit I just installed the amp pro and amplified all of the door speakers and dash speakers where did you tie into your dash speakers from after the amplifier? I’m getting an awful hissing sound also did you leave the active noise cancellation module in tact because Crutchfield gave me a bypass wire that completely discards the module it just plugs from the big white plug to the small black plug nothing else going into the module this does not seem right
Alright…. Someone that has done this with a vehicle with no factory amp answer this. I just want to run a 2 channel amp for my subs. Do not want to run an amp to door speakers, etc. How do I get the factory radio to power the factory speakers with this module?
ok so the down side to using this module is that once its programmed the truck thinks its has a factory amp in it so no more output will come from the radio side you will have to use a 4channel amp to power your speakers. i think i ended up using a small alpine power pack amp to power the speakers
@@jptheinstallguy so after i install this converter, all i have to do is run the RCA cables to the amp and then i will have sound? or am i missing something
@@pupetm thats it once you installed the module you run those rca's and speaker wires to your amp if its a 4 channel and just rca's if you are running a sub amp and you should have sound
I have an Ram3500 2022 tradesman I recently upgraded with Alpine speakers. After a couple weeks Front Passenger door speaker as well as dash front passenger speaker suddenly stopped working simultaneously both. what could cause that? Will this pac solve the problem and give me a better sound?
@@jptheinstallguy I'm good to go now! This video helped me plan out the last piece, which was installing the amp pro. Over the last week I've taken the interior of the truck out and installed a top to bottom complete new system with sound deadening. Put the amp pro in and everything sounds great. Most importantly I didn't tear anything up taking it apart or putting it back. This video gave me the confidence to move forward and do everything myself. 🙏🏾🙏🏾 Keep doing what you do!
bro never showed the wire harness to the highs, why would you leave that entire section out??? followed his advice, went and bought the mod and now im seeing a harness that you still have to tap the main harness, Your video is garbage, and everyone commenting on how good it is, your a bunch of idiots!
Thanks so much for this video! Just the info I needed. So using this AP4 module, I would then run the speaker outputs from the module to my aftermarket amplifier? Does this just do the doors or does it include the dash speakers? Thanks again!
@@jptheinstallguy Where is the ANC bypass for the amplified system? its not under the driver seat like in your video and Idk where to hook up the CH01 (or CH03) thanks for the reply!!
Hey man i have the same truck and am Doing this exact thing. My question is when you’re installing the Amp pro, is it a better option versus a line out converter? Also I’m installing new door speakers and using a five channel amp to power 110 inch subwoofer and the door speakers. Is the a ANC bypass module as simple as you showed to install?
if your adding a amp this is the best and easiest piece to use if you use a regular loc you have to add load resistors and that can become a headache. sorry for the late reply
Thanks for the video, a quick question just bought the same set up waiting on the mail, do I have to run the speaker wires for the doors to the new amp or the stock wiring just how it is will work thanks in advance.
@@jptheinstallguy i had my system already installed on my 2015 charger with this pac box and I disconnected the box and installed a eq and a epic center and now I connected the box back up and now I system doesn’t wanna work I only could here the dash small speaker play
i did.only because i am running aftermarket speaker,but still left the stock speakers wires in tact if some day i plan to sell the truck and i can put the stock ones back😁😁
The active noise canceling mics are in the car to block road noise if you add a sub and the mics are still connected once you turn the volume down or the car off you will get this very loud and annoying feedback from the subs. So its usually best to unplug your mics but this module allows you to bypass/integrate with the factory system so when you install a new amp it doesn't mess with the anc module and outputs that loud feedback. Its very necessary lol
I connected mine and have no sound did I miss something. In ur video u did not show all of what u connected with the ap4-ch41. Did u connect two speaker connectors in the harness????
not 100% sure for real but you can go the pac website to use there fitguide and see they actually have another module that is for sub only which might work better and for more videos
Btw. You have the best and most understandable video posted for this issue. You were right. If this module is not integrated with the system it’ll sound like garbage no matter what’s done.
I got this one from atrend but let me warn you ahead of time the box sticks out a lot from under the seat, it's not super bad but it's definitely not flush we are talking sticking out by a good 4 to 6 inches the dual 10 box is the same
Can this be used with a mono block amp only to power subwoofers? I've been told that if I use this in my 2020 RAM (non amplified system) and only hook up a mono block amp for the subs that I wont get any sound from the door and dash speakers.
that is true because when you do the 2 sleep cycles your are flashing the truck to think it has an amplified system so no output comes from the radio anymore which means you will only have bass from your mono block amp if you dont add a 4 ch but i think pac just made a module that is for sub only i will try to get this piece in and do a video on it for you guys who only want sub output
@@jptheinstallguy thanks for the quick response, bro. I have actually purchased the product you are referring to. It’s the PAC apsub-ch41 for sub amp only. However, I’ve been told with this product that it won’t work with non amplified factory systems for the same reason. It seems that people with these newer Mopar’s really don’t have much of a choice but to get the ap4-ch41 and use a mono and 4 channel to power everything or just a 6 channel or something to power everything.
I have the 2020 Ram with the 8.4 no amp. This is my first system. I was talking to the guy who is going to install my system and asked him if I need the am pro he said no that all I would need is a sound processor. I'm pass the point of confused. And the anc that I bought only has the 2 white connectors and not the black.
Sound Processors are Hard wired in to get access to a pre-amp output signal. YOU HAVE TO SPLICE FACTORY WIRING. Assuming you have the non Alpine system. With the PAC unit it's plug & play. With a Processor, you can tune your system directly from the box or your phone model specific. With the PAC you will tune from the amp. I like the PAC unit!! Simplifies the install drastically.
@@greghinchley6277 my only concern is the wire cutting I don't want to void my warranty. My installer said that he would install the pac but I would have to cut the wires. With the processor he can wire it into the anc bypass and not have to cut the factory wires.
@@greghinchley6277 this is my first system thanks for all the information which one is better. I'm going with all ds18 and the pioneer sound processor is throwing me off...lol
2016 Ram Big Horn Crew Cab. NON Amplified stock 6 speaker stereo & I don't have the ANC module under drivers seat. I upgraded to a full JL Audio system. JL RD900/5 amp (75W x 4 + 500W x 1), JL C2-600 6" components front and rear & the JL 10W3v3 Stealth Box. JL 4ga. amp wiring kit, JL 16ga speaker wire & 12ga wire for sub, JL 4ch & 2ch RCA's, Dynamat Sound treatment & a PAC AP4-CH41. Mounted the stealth box per instructions, ran new speaker wires THROUGH door boots (Pain in the ass but doable), ran remote turn on to deck along with RCA's. Ran amp kit thru firewall at the plastic cover next to the cable boot NOT thru the boot at the firewall. Mounted amp under rear passenger seat. Removed trim to access back of radio, unplugged the factory wiring harness and plugged in the CH41 to the radio and connected the factory wiring harness to the CH41. Connected the supplied remote turn on from the CH41 to the remote turn on to the amp. connected front/rear/sub RCA's to the CH41 and NOTHING ELSE. Set the dip switches per instructions and ran 2 "sleep" cycles at 5 mins minimum per instructions. Everything works as it should, however I am now waiting on a JL Twk88 DSP to add so I can fully get the sound I am looking for. IF you are NOT going to run new speaker wires then you will need to splice into the factory wiring per the supplied instructions, same if you are retaining the factory Alpine amp then you will need to use the secondary supplied harness with speaker leads that has the "AMPLIFIED" sticker on it and splice into your factory harness. The way I installed my set up, the dash speakers are NOT being used and when/if I choose to sell my truck I can take out my gear and reinstall the factory 6x9's to the factory quick connects, remove the CH41and do another 2 sleep cycles and the truck is back to factory with ZERO wires cut or spliced. I may do a video on my install (Would be my 1st ever YT upload).
pls do
that ANC bypass is slick. no one ever mentioned that on the ram forum. everyone just talks about pushing pins
that anc bypass is so issential...lol
Great tutorial. Only one that explains and shows at the same time. Appreciate it king 💪🏼💯
Please update the video, this model pac4-ch41 is only for amplified systems, if your truck only has an ANC (gray looking amp, not black) then you must get the pac4-ch41 R2 !
Mr. Jp, thanks for this video, now I won’t have to spend a lot of money for install
Up to 2021 ram so far with Alpine, HK, or non ext amp you still use CH41. It's simply the beat way to get your preouts without amplifying the chime sound and confusing the canbus network. Also the 2 sleep cycles are only for vehicles with no factory amplifiers when you have to change the one dip switch
Maybe a stupid question ,but where/how do you hook up the loose wires/speaker wire coming off the the back of the module. You didn't show explain that part . Any help would be appreciated
Where do you run the speaker wires from the amp to the door speakers? Do they tap in under the seat or behind the head unit?
Same question here
Well you would run the audio from the pac thru the rca cable to the amp.
You amp would have the speaker wires (start), run them to the doors (thru the door harness) to the speakers. All the warnings etc from the factory are still sent out, just not amplified from the factory amplifier.
Can't really give you a direction or place to run your speaker wires because it depends on where your amplifier is mounted. So if your amp was under your seat you would run it from under your seat into the doors.
But if your amp was in your trunk you would have to run it from your trunk into your door speakers.
I would say use speed wire to run your speaker wires from the amp all the way to the front of the amp pro harness
Can you tap into door speaker's wires at anc module to have a 5 channel amp power door speaker's.
Great video, quick question. I'm thinking on upgrading to the Phoenix 13.6 tablet radio, do I keep the ap4 or eliminate it because it has the wires fot the subs etc.
Great video getting ready to do this truck this weekend
I have a 19 1500 with alpine system. Have lc2i pro works with sub amp but wont play highs out 4 channel with rcas piggy backed off sub amp.
I think having the lc7i compared to the harness is the best option even if cutt the wires but u keep all the options I just did 2 2021 scatt packs
Just got finishing installing mine, but I’m noticing the volume is very low even when I turned the knob all the way up on the head unit
Does the pac amp pro module jus mount or sit behind the radio? Hoping it fits behind there and you don't have to mount it outside the radio or something
How do I make the nine speaker Alpine radio louder? It is supposed to be this great system and honestly, it’s pretty quiet.
Is it the same for 2015 3500 Dodge ram?
This video is genius
Seems simple. We dig it
Question for you. Will this piece allow you to run 2 separate amps? I plan to add add amp/sub and then another amplifier for my speakers
Video helped a lot. Will be doing this soon
If you can, can you do a video on the EQ and Q factor settings. That’s the one thing I don’t quite understand.
try this vid i just made it. hope it helps ua-cam.com/video/oGbxyPcqLus/v-deo.html
Thank you for that video. Im getting ready to do the same thing but in a 2020 Challenger with Alpine factory amp. Is the programming the same for the module for the Challenger? Also do I suppose to tap in to the factory amp? I'm new at all this but excited to do it. I have the AP4- CH41 and PAC APH-CH01 Harness.
Thanks JP!
What's the benefit of going with the amp pro vs going with the lc5 or lc7 audio control? I've honestly been going in circles with this. I have a 2019 challenger non amplified system, but I want to keep the factory head unit and add possibly 2 amps.
I have a 15 ram alpine factory system... front 2 door speakers were loud at one point.. then muffled out to only bass...my friends ram with the same system ..his door speakers are loud..I replaced the speakers and same thing
What about guys with the premium alpine system with the amp and sub?
I’m in the same boat. There’s videos on videos of people without premium systems and no info on people with amplified systems
I have the rockford dsr1 in my 19' ram 1500 with the 12" screen and alpine system
Same. This bypasses the amp. Unfortunately the speakers and existing subwoofer will not power by themselves when you install the pac4 so you will have to add an amo for your speakers and an additional amp for your subwoofer. Minimum $1000 with a digital sound processor or everything will sound like a tin can. Trust me
So I'm new to audio. Does that pac allow you to use all the factory controls with an after market amp and sub?
@@spdermnky yep.
I had a local installer install an amp for just the subwoofers, they cut the ANC wires, I wish they would have watched your video, so now I’m looking at upgrading the all the doors and the dash speakers, and add another amp for the highs, what speakers would you recommend for the doors and the dash, also an amp for the highs?
Outstanding video, sir. Thanks!
Glad it was helpful!
Finally getting around to buying these parts to start my own install in my 2021 2500. I havent had a good system in a car since I had a 2002 eclipse fully done up and with about 100 pounds of sound deadening in it lol. Really excited about this! The video helped explain a ton, thank you! Did the pac ch41 have a T harness that you ran the amplifier signal back out to for the stock speaker wires or did you run all new wire? Thanks JP!
Hey buddy, my truck I did the same thing this guy said about putting the number for switch down and I did the two deep cycles but only my rear speakers are the ones that are playing and they played loud at volume number one and all the way up to 38 do you know how to fix this issue I have a 2021 ram 2500, Big Horn 8.43.
Great video buddy!!
So last year I did an install on my 2015 ram 1500 crew cab tapping into the stereo wires with a hi low converter it did not work . Can you explain why I have looked over the internet for days and there is not much information. I have a 8.4 uconnect radio I'm about to throw into the street and buy a Tesla style radio . This module you installed cost 350 on Amazon why should I not just replace the radio with a aftermarket?
So would it be the same thing for the 2019 challenger with no amp?
Great video
Hey. Please help!! I want to install in my 19 ram (alpine with anc) and I only want to add subwoofers, at the moment at least. will the factory door speakers still work if I connect this or will I have to add a 4 channel amp for them as well? also because it is amplified what do I do with the 4th switch? any advice is greatly appreciated ty.
Good info, Quick question, are you getting any clipping when your at a high volume for a period of time? Do you know if there are any updates for the PAC unit?
I'm trying to install this AmpPro in my 2020 Ram 1500 non-amplified, I ran the sleep cycles and get a solid red light but doesn't flicker when I turn the knob and I have no sound. On the harness behind the radio there are speaker connectors but one is labeled "for amplified only" and the other doesn't say anything. Am I miss something to get my sound or would I have to run an amp to all door speakers?
I got the same issue
It comes with an separate harness, do I have to spice any wires together? I do not have a factor amplifier.
Great video I have a Chrysler 300c 2015 with the Alphine system is it the same I do to bypass factory amp ?
Is it normal to hear a slight static or hiss once this is installed? Just had 2 amps installed a 4 channel and mono, new door speakers, and cut wires to anc.
Do you need this, or will a line output converter work just fine
I have the ANC bypass with the white,grey,green and purple wires
Crutchfield says this wont work for 2021 ram 2500. It all looks the same im just not very experienced with this kind of stuff. Just looking for some assurance as to if 21 ram is the same or not.
Will the bass knob work with any amplifier
How do I install the speakers and tweeters?
Do I just 1,cut factory speakers out and splice new speakers/tweeters to the factory harness on all 4 doors.
2, connect the PAC CH41 to my radio and from the pac module run the front and rear rca cables to my amp powering the 4 doors and 1 rca from the pac to my sub amp.
3, just connect the CH03 harness to the ANC under the seat and that’s it?
Does it work same way for durango
So do you have to have that adapter too get rcas? This audio shop is positive that I don’t and gave me this adapter that requires you to splice into wires. But I can’t find a wire diagram anywhere! Help
Nice job bro
Big up💯
I have a 2019 ram basic stereo w anc under seat. I have a powered sub to install. I bought the pac ch1 anc bypass. Can I just plug that in my anc device then run my kicker loc device off the anc bypass then of course my amp rca off it?
I don’t have alpine system. How do I add a 4 channel amp to this pac? Went thru the cycles and have no sound. I see now that I need an external amp for speakers how do I run it?
Hey thanks for the video. I thought you were supposed to cut the black plug off and run your speaker wires from your amp to it? That what it says in the documents
Maybe you can help, I just installed this in a challenger and seems like I have less bass than when I was using a LOC, I even reconfigure my gain to my subs. Im using the bass knob and its turned all the way up, and was turned up when i set my gains. Any ideas why my bass seems less, Im set at 5 volts
Oh man i like you video so much, i need your help you know I’m trying to change the speakers to my 2019 ram big horn, in fact i want to upgrade all the sound
ua-cam.com/video/IfUT1EhmRqI/v-deo.html here is a vid I did on the speaker install hope it helps
Did you amplify the door speakers?
I'm not sure if this was already answered, but I only want to power a mono amp for my subwoofer. what switches do I flip on or off on the pac ap4-ch41 so I can use the amp for my subwoofer? also, will powering the amp be as simple as hooking up the power cable to the battery and ground cable to ground, or do I need to buy something else to hook into power?
I have a 2016 Chrysler 300 I was just curious so if I have an factory amp I wouldn’t have to go through that?
I cannot find a box anywhere for the non- ram storage like yours. Where did you get yours? Got a link?
If I only want to install subs on my Ram do I have to do the bypass the thing under the seat?
Quick question hopefully you can help me I have the same exact vehicle 2019 ram non-amplified factory unit I just installed the amp pro and amplified all of the door speakers and dash speakers where did you tie into your dash speakers from after the amplifier? I’m getting an awful hissing sound also did you leave the active noise cancellation module in tact because Crutchfield gave me a bypass wire that completely discards the module it just plugs from the big white plug to the small black plug nothing else going into the module this does not seem right
So same for2020 ram 2500/3500 non amplified 8.4 screen?? Thank you
Did you have to do anything with your computer to the amp pro box ? I just installed mine and the volume is very low even with it turned up
Alright…. Someone that has done this with a vehicle with no factory amp answer this. I just want to run a 2 channel amp for my subs. Do not want to run an amp to door speakers, etc. How do I get the factory radio to power the factory speakers with this module?
ok so the down side to using this module is that once its programmed the truck thinks its has a factory amp in it so no more output will come from the radio side you will have to use a 4channel amp to power your speakers. i think i ended up using a small alpine power pack amp to power the speakers
Do i need that module with a pioneer 5 channel amp with signal sensing and speaker level input
Where did you pick up the ANC bypass harness?
Do I need this in the 2019 classic?
What does the knob do? What do I do if I have a bass knob with my amp also?
Very good looking setup. Nice work.
Great stuff thanx
No problem
@@jptheinstallguy so after i install this converter, all i have to do is run the RCA cables to the amp and then i will have sound? or am i missing something
@@pupetm thats it once you installed the module you run those rca's and speaker wires to your amp if its a 4 channel and just rca's if you are running a sub amp and you should have sound
My 2020 ram Has the el pine system with asap how can I add another amp?
I have an Ram3500 2022 tradesman
I recently upgraded with Alpine speakers.
After a couple weeks Front Passenger door speaker as well as dash front passenger speaker suddenly stopped working simultaneously both.
what could cause that?
Will this pac solve the problem and give me a better sound?
exists for jeep wrangler unlimited 21 with uconnect 8.4?
If I wanted to put an equalizer for my ram. Do I still need the amp pro?
Will this work on a 2022 ram 1500 with the 8.4 radio
Thanks!
Planning my RAM install now and your video was very helpful. Appreciate that ✊🏾
super thank you bro. thank you for all the love and support let me know if you have any further questions
@@jptheinstallguy I'm good to go now! This video helped me plan out the last piece, which was installing the amp pro. Over the last week I've taken the interior of the truck out and installed a top to bottom complete new system with sound deadening. Put the amp pro in and everything sounds great. Most importantly I didn't tear anything up taking it apart or putting it back. This video gave me the confidence to move forward and do everything myself. 🙏🏾🙏🏾 Keep doing what you do!
How do the speaker inputs work? Harness is ready or do I need to splice
bro never showed the wire harness to the highs, why would you leave that entire section out??? followed his advice, went and bought the mod and now im seeing a harness that you still have to tap the main harness, Your video is garbage, and everyone commenting on how good it is, your a bunch of idiots!
Thanks so much for this video! Just the info I needed. So using this AP4 module, I would then run the speaker outputs from the module to my aftermarket amplifier? Does this just do the doors or does it include the dash speakers? Thanks again!
Do you know if using the amp Pro you have to run new speaker wire for each speaker? Or you plug and play and use your factory wire speakers ?
I don’t have the ANC box under my seat. I have a 2020 ram 1500 idk where it could be I looked everywhere
What's up boss I'm having issues with it blinking red when I turn it on it blinks red when I turn off the radio and when I change the channel
Is this a crew or quad cab?
Does this installation void the warranty at all?
Love the video? What changes if you have the Alpine amplified system in your Ram?
this should work with both amplified and non amplified rams so youll just be adding the sub
@@jptheinstallguy Where is the ANC bypass for the amplified system? its not under the driver seat like in your video and Idk where to hook up the CH01 (or CH03) thanks for the reply!!
If all im doing is upgrading the doors & the dash speakers do i still have to by pass the anc?
No
Is there any chance i can get that PAC anywhere cheaper than 300?
Is there one of these for the 2019 Dodge Journey with the UConnect 8.4 stereo system? It's so damn weak.
Hey man i have the same truck and am Doing this exact thing. My question is when you’re installing the Amp pro, is it a better option versus a line out converter? Also I’m installing new door speakers and using a five channel amp to power 110 inch subwoofer and the door speakers. Is the a ANC bypass module as simple as you showed to install?
if your adding a amp this is the best and easiest piece to use if you use a regular loc you have to add load resistors and that can become a headache. sorry for the late reply
Did your chimes change? I installed that and the alert chimes for the backup sensor and for the blind spot detection sound awful
everything sounds the same
Where did you order all those wires from ?
Thanks for the video, a quick question just bought the same set up waiting on the mail, do I have to run the speaker wires for the doors to the new amp or the stock wiring just how it is will work thanks in advance.
Don't have to tap into the doors harness should have the speaker wires for you to run to the amp
@@jptheinstallguy i had my system already installed on my 2015 charger with this pac box and I disconnected the box and installed a eq and a epic center and now I connected the box back up and now I system doesn’t wanna work I only could here the dash small speaker play
i did.only because i am running aftermarket speaker,but still left the stock speakers wires in tact if some day i plan to sell the truck and i can put the stock ones back😁😁
@@donearl6675 after installing the PAC how do you connect your factory speaker wires to the after market amp??
Whats the purpose of bypassing the ANC module. Thanks for also uploading this video, hard to find new ram subs install videos.
The active noise canceling mics are in the car to block road noise if you add a sub and the mics are still connected once you turn the volume down or the car off you will get this very loud and annoying feedback from the subs. So its usually best to unplug your mics but this module allows you to bypass/integrate with the factory system so when you install a new amp it doesn't mess with the anc module and outputs that loud feedback. Its very necessary lol
I connected mine and have no sound did I miss something. In ur video u did not show all of what u connected with the ap4-ch41. Did u connect two speaker connectors in the harness????
Good Video Bro. Will this interface work for 2021 Durango with 12” screen
2021 Durango R/T with factory sub?
not 100% sure for real but you can go the pac website to use there fitguide and see they actually have another module that is for sub only which might work better and for more videos
Cool. I will do that. I need the multi channel one for front, rear and subs. I’m running 3 amps for it and want it to be right.
Btw. You have the best and most understandable video posted for this issue. You were right. If this module is not integrated with the system it’ll sound like garbage no matter what’s done.
My sub put not working any idea why?
How did you flat out the factory equalizer?
I've been looking all over for dual sub box for the 19-up Quad cab. Where'd you get that one from?
I got this one from atrend but let me warn you ahead of time the box sticks out a lot from under the seat, it's not super bad but it's definitely not flush we are talking sticking out by a good 4 to 6 inches the dual 10 box is the same
@@jptheinstallguy thanks bro!
How much is the part
where did you end up putting the interface? i was thinking of the glove box is the cable long enough
i was able to mount this right behind the radio
@@jptheinstallguy cool. is the cable long enough to go to the glove box?
@@jptheinstallguy i just got my kit and was able to put it in the glove box. That way i can get to it without popping the center piece off. Thanx man
Wish you were nearby I'd pay you to do my truck!!! Easier that way!!
Did you have a harness from the amp to all the speakers or did you rerun wire or does that preout come with something for that?
Used the wires off the spesker side of the harness and went straight to the amp
@@jptheinstallguy oh thanks, I didn't see the speaker side of the harness.
@@jptheinstallguy how can i contact you bro have a few questions
Is it possible to use a 7 band eq if you’re using ap4?
sure just take your rca from the module and go to the eq should work just fine
Can this be used with a mono block amp only to power subwoofers? I've been told that if I use this in my 2020 RAM (non amplified system) and only hook up a mono block amp for the subs that I wont get any sound from the door and dash speakers.
that is true because when you do the 2 sleep cycles your are flashing the truck to think it has an amplified system so no output comes from the radio anymore which means you will only have bass from your mono block amp if you dont add a 4 ch but i think pac just made a module that is for sub only i will try to get this piece in and do a video on it for you guys who only want sub output
@@jptheinstallguy thanks for the quick response, bro. I have actually purchased the product you are referring to. It’s the PAC apsub-ch41 for sub amp only. However, I’ve been told with this product that it won’t work with non amplified factory systems for the same reason. It seems that people with these newer Mopar’s really don’t have much of a choice but to get the ap4-ch41 and use a mono and 4 channel to power everything or just a 6 channel or something to power everything.
Hay I am having the same problem what do I need to do to get my door speakers to work again
I have the 2020 Ram with the 8.4 no amp. This is my first system. I was talking to the guy who is going to install my system and asked him if I need the am pro he said no that all I would need is a sound processor. I'm pass the point of confused. And the anc that I bought only has the 2 white connectors and not the black.
Sound Processors are Hard wired in to get access to a pre-amp output signal. YOU HAVE TO SPLICE FACTORY WIRING. Assuming you have the non Alpine system. With the PAC unit it's plug & play. With a Processor, you can tune your system directly from the box or your phone model specific. With the PAC you will tune from the amp. I like the PAC unit!! Simplifies the install drastically.
@@greghinchley6277 my only concern is the wire cutting I don't want to void my warranty. My installer said that he would install the pac but I would have to cut the wires. With the processor he can wire it into the anc bypass and not have to cut the factory wires.
The PAC has the optional "Y" connector for the ANC. When using the Y your O.E. wiring remains virgin.
@@greghinchley6277 this is my first system thanks for all the information which one is better. I'm going with all ds18 and the pioneer sound processor is throwing me off...lol
Where did you run the remote wire for the amp
Hooked it up to the remote wire coming off the harness of the module and ran it with the rca's under the carpet
So there’s no need to splice any speaker wire? That’s what the plug and play harness is for to run RCA signal correct?