How to repair scratched glass using Mirka Abralon Abrasives and GPC33 Glass Polishing Compound
Вставка
- Опубліковано 3 гру 2019
- Watch one of our highly skilled, qualified glass polishers remove heavy scratch damage from a glass surface, producing distortion free, invisible repairs.
maan those scratches were seriously deep..well done to Lee and team..
Appreciate the extremely detailed video. I'll be using this as a guide to clean up my 180 gallon aquarium!
than i need to talk to you i would like to do this on my 75 gallon Tank any advice you can give for a first timer
@@lawrence1986ify I still haven't done it. I bought all the pads and tools but have gotten side tracked by other projects.
Did you ever did it?
@@josehoffiz7691 I sure did! I was able to get just about all the scratches out minus a couple in awkward corners.
@@justinbrownell5511 thank you for answering, you just gave me the confidence I needed to do it in mine, wish me luck!
Very informative video. Thanks
This video was really helpfull, thanks!!
Great Job !!!
Dang this is a great video!!
I agree! It's the best on UA-cam easily. God bless this company for putting it up. Taught me heaps
Great video! I am in Wellington New Zealand and I am a glass nerd! I love restoring glass surfaces. I’d do it for free it’s just a bonus I can get paid. I am keen to network with other people world wide who love glass restoration as well
We do this full time mate glass everywhere if people care enough there is always work
@leemellors6254 Thank you for the reply, is this Lee from the video?
Very good👍👍👍
Awesome
What kind of machine are you using? And what rpm to the different stages? How low can you go in the rpms and Still make it work?
I cannot see where did you use GPC33 polishing compound?
Do you have a link to procure the abrasive disks and GP 33 glass polishing compound
How much would it cost for a patio door?
What about small scratches in the corner of a door window pane? I made a mistake on a job with a sander... they are no where near that deep or long. I've heard for little bunches like that I can use toothpaste and buffer pad for a dremel.. any feedback?
Does this work on interior car glass?
How to remove shrapnels from flex mashine damage?
GREAT WORK ❤
How can I buff out angle grinder shrapnels from my windows?
It's not possibl3 to buff them out. That is very deep damage. If left in the glass it will rust and cause discolouration around the pit mark. I am.not experienced enough to grind damage that deep out. But I have been able to chip out the metal fragments and then spray the glass with rust treatment. And in some situations thr client is happy with that. But you need to get the metal out fast. As it rusts fast
Do you do automotive glass the same way
Wow - 6000 rpm eh! My rotary polisher only goes to 2200. Do I need to switch to an angle grinder?
I looked at the flex site and think I found what model is being used. It appears to be model L 1503 VR. Maybe they meant setting 6 and not 6,000 rpm?
Hi, thanks for a nice video. Which grade are you using for sanding, and is it possible to use Mirka deros as a sander? Thanks David
You need an rotary machine for this
@@janm.jensen7305 I am GRP Finisher and using Mirka Deros 5.0 so can I use on glass? thanks
@@davidgventsadze8335 No the Deros is orbital machin and you need too get temp up when using Abralon
flot work
I've got a Rover 75 with scratched side windows. Fail the fingernail test. Tempted to try these techniques on the front and side windows as finding unscathed replacements is pretty much impossible. Safe to use on car glass?
Side windows are safe to do as the glass is tempered. A windscreen is made of softer glass and has a concave so distortion is possible.
Dust everywhere !!!!
Music f’ed it up..
What’s up with the rave music?? Not good
I hate these "Ads". They never answer questions in the comments and people viewing these videos are the ones that are seeking specific information and techniques. Also, no pics of the glass in actual sunlight. Who knows how it really turned out?? DISLIKE
Gave plenty of info during each stage, not their fault you’re too dull to follow instructions and pay attention- they’re not here to baby step UA-camrs through the minutest of details - if you need that level of info and help just pay a professional ffs - always whining people like you on vids like this - I followed their info and methods and got a great finish and I’d never done it before, get a life ffs
@@thedevilsreject23 You sound salty AF 😂
@@bluebayeux says the one whining on a vid because they’re too stupid to follow basic instructions whilst complaining of ads - yeh good logic 😂🥴🤦🏼♂️👍🏻🍻
@@thedevilsreject23 Are you ok? Did you take your meds today? Damn, you're ridin' their d*ck hard! Giddy up bozo 😂🤡
Are you kidding? They took the time to add comments explaining what they are doing to a 30 minute long video and all you can do is moan. Send them a bloody email or give them a call! DISLIKE to your comment.