@@rken3116 Please check this kit ua-cam.com/video/mwys2VHlQ1c/v-deo.html , the process is the same but the backing pad that comes with this kit is more suitable for curved surfaces.
Extra Pro tip: Have an accent. Here in Texas I don't have one so I had to polish more but this worked on my Jaguar F-Type windshield to remove scratches and a chemical stain that would not come off any other way. I tried everything and I had to use Cerium Oxide on a wool pad in a way this video described and it worked. Took two hours and going over it multiple times. But it worked.
Pro tip: in the absence of an accent, drink a can, or preferably a pint, of Guiness. It is a well known fact that this imbues the drinker with instant elevated levels of Irishness, and thus speeds up the process considerably
@@bahamastarry3054 That's the thing about accents. No one hears their own, but usually when I travel and say I'm from Texas, I'm told "You don't sound Texan." I think it's because they imagine we all talk in a country twang. But we don't.
really great job, what a result. You have a very lovely Irish accent. I especially like the way you say think and thirty three...it tickles my brain in a nice way
Works fantastically! Ordered last week for nz. Single pane glass, 6mm. Made some sanding marks from a festool iron sander, 150 grit. Buffed them out easy. This was my test at home before I take it to work to fix the apprentices mistake on some double glazing. Thanks a bunch
Worked great! Made 2/3 passes, around 20’ each, on shallow circular scratches I had on the windshield, they are gone or barely visible if I know where to look. Only used the polishing white pad and compound. No cutting
Pro tip. Don’t start your drill until it’s already flat onto the surface of the glass so the edges of the abrasive pad doesn’t dig into glass. Pro tip use a right angle drill for more stability.
I'm considering this as an option, haveto tackle the rear window... thats morea concern with the heated veins. Would you have a kit and or demonstration video for this?
We don't have a video on the rear window, however, we have one on a side window, the process is the same. In most cars, the heated element for rear windows is embedded within the layers of the glass, not on the outer surface, and if that's the case then the kit is safe to use. ua-cam.com/video/mwys2VHlQ1c/v-deo.html
@matthewfrancis-mountford6654 yes, but u need way more pads and time than u think. I went at it for 8 hours and only managed to restore the scratched I made while trying to polish it and didn't manage to remove the original scratches. Best advice I can give is if u can just replace it Instead of restoring it.
Hi - would you recommend using this to remove hard water stains from shower glass, and if so what grade of cerium oxide and what grade of pad/s? many thanks
For this purpose, we recommend using our high grade cerium oxide or gp-pro glass polishing compound with a felt polishing pad. If the water stains are stubborn, you may need to use a two-stage abrasive process first to break down the deposits before moving on to polishing stage. Let us know if you have further questions.
Some pedestrian got angry that I was on the crosswalk trying to see oncoming traffic and resorted to keying my window. Now I have a scuff on the glass and replacement is $800.00, will try this with a professional.
Please check this kit ua-cam.com/video/mwys2VHlQ1c/v-deo.html , the process is the same but the backing pad that comes with this kit is more suitable for curved surfaces.
In this video we start with P180 (GlasX 120 abrasive) glasspolishshop.com/abrasive-discs-pads/xnet-abrasives/glasx-120-medium-grade-abrasive-3-inch-75mm
I used it on CRT Monitor Glass and it got the big scratches out but now I have a bunch of hairline scratches that i cant feel with my nail that create this shimmer on brighter colors. Any idea how to get these out? More polishing appears to be making it worse not better and I even used the second polishing pad.
It seems that the polishing process is highlighting the existing hairline scratches. This can happen when the compound penetrates the tiny scratches, making them more visible. • Before proceeding with the polishing stage, it's crucial to ensure that all scratches are adequately removed. Spend extra time with the blue GlasX60 abrasive, focusing on achieving a nice, uniform haze across the area without any visible scratches. • Once you have achieved a uniform haze without visible scratches, proceed to the polishing stage.
Totally agree, sanding glass requires Dust Mask, especially if sanding large panes of glass, this is why all our scratch repair kits come with the Dust Mask.
Yes, the kit can be used on aquarium glass. However, if the scratches are inside the tank, ensure the tank is large enough to allow proper maneuvering of the drill at the correct angle, along with enough space to control the drill and apply the appropriate pressure.
Hello, Does your company have a kit for smaller glass, Like glassware, crystal? I have been asked to remove and engraving off a crystal trophy, Was wondering if the process is the same. Thank you
Thank you for your inquiry. To answer your question, the process for removing engraving from crystal is indeed the same as for scratch removal. The smallest kit we offer is a 2-inch (50mm) kit. To better assist you, could you please share the size of the glassware or send us a picture at contact@glasspolishshop.com? This will help us determine if the 2-inch kit is sufficient for your project.
I've tried doing this and whilst I got the deep scratches out, I'm left with a massive abrasive and hazy section that won't come out. I've used all the pads. Is there a specific grit sandpaper I can use to remove the abrasion? I started off with a few deep scratches, now I'm left with a big square abrasive haze!
Hi, You need to use the blue abrasive a lot more! If you have a hazy area after polishing it is more than likely you have not used the blue pad enough and still have marks left over from the green. If you have used the blue twice as long as the green it should polish up straight away.
Put it this way..... If you weren't left with the problem you have it would be miracle. Its taking the piss to make out like a first timer could get a great result with a DIY kit. This is why its a specialist field of work.
When using the abrasive pads is where you can create a distortion in the glass. You have to be mindful not to concentrate on one specific are for too long and try to use a bigger are to smooth it out on the rest of the pane. staying on one spot will create a dish like distortion and using too much of the edge of the backing pad will make it bounce on the glass causing ripple effect. Done properly there should be no distortion looking head on through the glass. Even with some tempered/toughened glass there is some natural distortion looking sideways on at the glass it also depends on how much damage you are removing and how deep the damage is.
@@GlassPolishShop This! Like drywall, glass is not actually perfect most of the time. It is a series of smooth, well spaced waves and undulations. But we will percieve it as flat.
To help with optic distortion, make sure to keep the grinding discs as flat as possible. Keep heat to a minimum. Bellow 120 degrees Fahrenheit would be best. To keep the grinding disks as flat as possible, it is best to use larger discs and a machine that is not a drill. A automotive type polisher is best for this as you can place your hand flat on the head of the polisher to hold the grinder on the glass, being careful not to press too hard. Let the abrasive do its job, pressing too hard will make it dig unevenly into the glass. Another tip to avoid distortion is to keep the glass clean and dry. There is no need to touch the glass as he did, use an inferred thermometer to check temp. The oils from your hand will make the grinding disc slip thus leaving a high spot where you touched it. Also, hot glass and cold water is a recipe for broken glass. Lastly, instead of only doing side to side motions while grinding, also do up and down motions. Alternating each time you go over the repair area. Always step out the repair area half the width of the grinding disc each time you do a pass. Hope this helps! 😊
Thank you for your enquiry. This kit is suitable for scratch removal. If you wish to remove the grinder and welding splatter damage, please drop us an email with a picture of the damaged area, and we will get back to you with the solution.
I used a product called “Bio-Clean hard water spot remover” and only in sunlight at certain angles you can see the abrasives in the cleaner have left scratches… what do you recommend just the polish?
Thank you for your inquiry. To address light spiderweb scratches, you can use cerium oxide or a glass polishing compound along with a felt polishing pad for effective removal. It is recommended to use a rotary device, such as an electric drill or rotary polisher, for optimal results.
Yes, our kit can be used on automotive glass. You may also want to consider our similar kit, which includes a more flexible backing pad. This feature can be particularly useful when working on curved glass surfaces: ua-cam.com/video/mwys2VHlQ1c/v-deo.html
@@GlassPolishShop thanks. My car's drivers window has numerous deep scratches in it and it's not an easy part to find. This might help me fix it. Do you ship to US?
Thank you for your inquiry. We do not recommend polishing glass if the surface is coated with paint or a film, unless the coating is within the glass layers. If the coating is on the outside, it may be removed during the polishing process.
Our rates depend on the nature and scope of the job. We typically charge either a day rate or a call-in charge for smaller tasks. For the type of damage shown in your video, this would fall under our call-in charge.
Yes, you can remove scratches from your windshield, just be mindfull to check it does not have an exterior coating that could end up being removed when using an abrasive. glasspolishshop.com/automotive-care-repair?product_id=374
This is a standard electric drill, with a recommended RPM range of 1500-2200. We recommend using a corded drill rather than a battery-powered one, as it allows you to maintain a consistent speed while applying pressure during polishing. The abrasive discs used in the videos are: green P180, followed by blue P500. Please note, not all silicon carbide discs are the same in quality or performance.
Cerium oxide is a polishing solution ideal for the final polishing stage or for removing superficial scratches. However, if you need to remove deeper scratches, the surface must first be sanded down and then polished, as demonstrated in the video.
Hello, Could you please specify the shape of your lens, whether it's Spherical or Cylindrical? Additionally, it would be helpful to know the intended use for the lens. If you can, kindly send us an email with a picture so that we can provide you with more detailed assistance. Thank you.
Do you recommend this kit for glass aquariums? Mine has some minor scratches. They're not deep, they're more like the result of cleaning with a regular cloth or paper towel. I'm unsure if I should just live with them or try to get rid of them. I would much prefer to have them removed and enjoy a crystal-clear view of my tank and fish. The area is similar to the one in this video.
All our DIY kits can be used to polish fish tanks. You can send us an email with the size of your aquarium and pictures of the scratches, and we will get back to you with a recommendation.
Thank you for your enquiry. Yes of course this works well on upvc double glazed windows, in fact the glass we are repairing in the video is a double glazed unit.
In general no there is nothing else that could go wrong, if you are working on laminated or float glass then you should keep the temperature in check because overheating can cause it to crack, as long as you follow the step by step instructions and take your time you will be fine. If you mean a manufactures coating on the glass then in a double glazed unit the coating is inside the glazed unit so there will be no problem with that. If there is an after market window film on the glass then it has to be removed before any repair can be done.@@TimHarrison1
@@GlassPolishShop Cracking due to heat is my biggest concern. How hot is too hot? How do you know without touching and how often should you spray cold water on it?
You can use an infrared thermometer to check the temperature. If you don't have one, the only way to gauge the glass temperature is by using the palm of your hand. The maximum temperature you can reach during the process depends on the type of glass you are working with. For example, mirror or laminated glass can reach temperatures of up to 48 degrees Celsius, while tempered glass can go as high as 82 degrees Celsius.
Thank you for your enquiry. Yes of course you can use this product and technique on ceramic glass cooker tops, the only thing to watch out for is the plate ring marks because if they are painted on the top of the hob as opposed to the underside they can easily be removed due to the abrasive nature of this kit. Should you have any doubts or require further assistance please don' hesitate to contact us.
All stove tops are different, some are underneath the glass, but most are on the surface. Using the abrasive pads can/will remove the markings. The polish used at the end of the process will not.
Thank you for reaching out to us regarding your DIY Glass Scratch Removal Kit. While we would love to provide you with guidance on whether you need more pads, it's important for us to understand the specifics of your project to offer the most accurate advice. Could you please send us an email with the following details: The number of panes you'll be working on. The size of each pane. The percentage of damage on each pane. Once we have this information, we'll be better equipped to assess your needs and provide you with tailored recommendations. email: contact@glasspolishshop.com
Yes, our kit can be used on the mirrors. Please refer to the link to watch the video: ua-cam.com/video/cxO9FLJd7e4/v-deo.html ua-cam.com/video/-dFwoqyz47M/v-deo.html
Will this work on a domestic house window ? Glazing company told me it was impossible to polish / grind out a scratch, but this looks like it would, unless the grade of glass is somehow different from what i'm looking at on my house window (that has much thinner scratches than processed here)
Hi James, Thank you for your inquiry. Our kit can indeed be used on house windows. However, before you decide to try the kit, please send us an email at contact@glasspolishshop.com with a picture of the window, the size of the pane, and if possible, please mark the scratched areas. We need to assess the size of the damage to determine whether you should choose the DIY or a PRO kit.
Yes, it can be used on auto glass. You can also check out another kit that comes with a more flexible backing pad, which is suitable for curved glass: ua-cam.com/video/mwys2VHlQ1c/v-deo.html
If you want to remove pits from the entire windshield, we recommend using a 5" kit with the rotary polisher ua-cam.com/video/7lQDVlqKWBs/v-deo.html The 3" kit is recommended for small areas only.
I have a pinball machine backglass that somehow got a few nicks; I am a bit concerned that if I try something like this, it might turn out worse. I wouldn't mind doing it for a very small area, and by hand.
Can I used a normal corded drill or do you have any recommendations? I have called around in my area all the numbers I could and they all want to replace my glass. I have dog scratches only and am now considering doing it myself
Our DIY kits are designed for use with an electric drill, however, if you plan to work on the larger areas we recommend a PRO version and a rotary polisher with the variable speed control .
Yes, it can be used on auto glass, however, please check our different kit which comes with a more flexible backing pad more suitable for curved surfaces. ua-cam.com/video/mwys2VHlQ1c/v-deo.html
yes, this can be used on a fish tank. Please see the following link for the kit we recommend: glasspolishshop.com/glass-restoration/scratched-glass-repair-kits/glass-scratch-removal-kit-do-it-yourself-xnet-system
If you think of polishing the entire windshield, consider using a 5-inch kit with a rotary polisher instead of a 3-inch kit with an electric drill. The 3-inch kit is suitable for small areas or spot repairs but not large panes.
I have a very small scratch that I can feel with my fingernail on a expensive aquarium inside glass. Will this method affect optical clarity or be noticeable during viewing the glass ? Can I do just the small affected area ? Ugh I’m nervous.
Hi Steve, thank you for your inquiry. If used correctly you should not distort the glass. You wont need to polish the whole tank but you will need to make the damaged area a little bigger when using the abrasive to avoid getting a distortion and blend it in.
You can find the kit following this link: glasspolishshop.com/glass-restoration/scratched-glass-repair-kits/glass-scratch-removal-kit-do-it-yourself-xnet-system
Hi, • Look for any markings on the glass itself. Manufacturers often label windows to indicate if they have special coatings. This information is typically found in one of the corners of the glass. • Examine the window glass closely. Some coatings, like Low-E (Low Emissivity) coatings, may not be visible to the naked eye. However, if there's a reflective or tinted appearance to the glass, it might indicate the presence of a coating.
Thank you for your inquiry. The time required for the process really depends on the depth of the scratches and the size of the area. In the video, the scratches were quite deep, and as a result, the entire process took about 40 minutes. Keep in mind that for shallower scratches or smaller areas, the process might be quicker.
@@GlassPolishShop Hey mate, I'm just wondering what grits the green and blue sanding pads have. Also, what compound do you use for polishing? Regard,Dejan
You can use "whitening toothpaste" to remove the "deep" scratches and finally polish the glass with cerium oxide. No need for tools. Newspaper works well as a substrate for these abrasives. Don't go near the windscreen with abrasive pads like Scotch Brite. PS I'm an amateur optical designer and telescope lens(mirror) manufacturer.
If the scratch cannot be felt with you fingernail then our Pro Polish Cerium should be able to remove the scratch. If it can be felt you may want to use a fine abrasive then the polish.
Thank you for your inquiry. Our product is specifically designed and formulated to be safe for use on glass surfaces, including the inside of aquariums. It is non-toxic and does not contain any harmful chemicals that could pose a danger to fish or other aquatic life. Remove any fish or other inhabitants temporarily during the polishing process and thoroughly clean and rinse the aquarium when you are finished.
Yes, it can be used on car windshields, however, if you are planning to polish the entire windshield we recommend using a 5-inch kit with a rotary polishing machine. The DIY 3-inch kit and electric drill are suitable for small areas.
@@GlassPolishShop Im planning this summer will use toolkits. But my car front windshield and front lights fully scrached from sandstorm. Windshield look so many small scratch. im afraid of is it will work?. In night can't ride a car, can't see front of glass.
@@sukhee5 Thank you for your inquiry. If you are planning to restore the entire windshield, we recommend considering our PRO kit over the DIY kit. The PRO kit includes 5-inch components and is designed for use with a rotary polishing machine, which is more suitable for working on large panes of glass. Please refer to this video ua-cam.com/video/7lQDVlqKWBs/v-deo.html to watch the PRO kit in action.
If the glass is tinted by the manufacturer, then the answer is yes, you can use the kit. Please refer to the link to watch the video on how we restore the black coffee table: ua-cam.com/video/gDa4Zes2KgE/v-deo.html
Thank you for your inquiry. Mirrors, like ordinary glass, can be polished using our system. However, when working on mirrors, you will need to pay closer attention to temperature control during the process compared to working on standard glass. To assist you further, please send us a picture of the mirror you wish to polish, and let us know the specific type of damage you are looking to address. Whether it's scratches, haziness, or any other issue, providing us with these details will help us provide you with more precise guidance. You can email us the information and images at contact@glasspolishshop.com.
Hi, I sanded down my glass shower panel (1 out of 3) which was horribly etched due to 12 years of limescale. I think i have not used the blue disc enough, as after i used teh 3.5micron cerium oxide paste, I still have haze. My question is which is the best paste to use for polishing? On your website you have 3.5micron, 2.5, 2.3, 1.2 as well. I only have the highest grade right now, which one should i use as a final polishing step, 2.5 or 1.2?
Thank you for your inquiry. If you have sanded glass using our abrasive discs, we recommend using GP-PRO glass polishing compound (2.3 microns) for the final polish. Please note that in order to polish the glass, you will also need a felt polishing pad. If you need further assistance, please feel free to leave a comment or send us an email at contact@glasspolishshop.com
Thank you for your inquiry. It is easier to remember the color code for each stage than the grade number. If you would like to learn more about our system and the grades, please visit our website (link in the description). There, you can find all the consumables with additional information used in the video.
@@densan92 please refer to the link to watch the video of removing scratches from the side window. If you follow the steps correctly you will not see any distortion. ua-cam.com/video/mwys2VHlQ1c/v-deo.html
We recommend between 1500-2000rpms and the drill with high torque. Most electric drills generate that sort of speed. Try to avoid using battery drills due to low torque. Low torque will slow down the drill while putting pressure on the pad.
Get your DIY Glass Scratch Removal Kit here: bit.ly/GP-28003
✨ Use code UA-cam15 for 15% off your purchase!
Would this work on a car windshield?
@@rken3116 Please check this kit ua-cam.com/video/mwys2VHlQ1c/v-deo.html , the process is the same but the backing pad that comes with this kit is more suitable for curved surfaces.
Extra Pro tip: Have an accent. Here in Texas I don't have one so I had to polish more but this worked on my Jaguar F-Type windshield to remove scratches and a chemical stain that would not come off any other way. I tried everything and I had to use Cerium Oxide on a wool pad in a way this video described and it worked. Took two hours and going over it multiple times. But it worked.
Pro tip: in the absence of an accent, drink a can, or preferably a pint, of Guiness. It is a well known fact that this imbues the drinker with instant elevated levels of Irishness, and thus speeds up the process considerably
you don't believe that you have an accent?
Or just not bother about a scratch or 10 scratches, after 5 pints of Guiness. And just feck it.😂
You are from Texas and you think you haven’t got an accent? Good one 🤣🤣
@@bahamastarry3054 That's the thing about accents. No one hears their own, but usually when I travel and say I'm from Texas, I'm told "You don't sound Texan." I think it's because they imagine we all talk in a country twang. But we don't.
Pro tip! Take time and don't rush will give you better results.
really great job, what a result. You have a very lovely Irish accent. I especially like the way you say think and thirty three...it tickles my brain in a nice way
And his reply would be the obvious: "WHAT accent? YOU are the one with the funny accent."
@@demef758 LMAO
Works fantastically! Ordered last week for nz. Single pane glass, 6mm. Made some sanding marks from a festool iron sander, 150 grit. Buffed them out easy. This was my test at home before I take it to work to fix the apprentices mistake on some double glazing. Thanks a bunch
Worked great! Made 2/3 passes, around 20’ each, on shallow circular scratches I had on the windshield, they are gone or barely visible if I know where to look. Only used the polishing white pad and compound. No cutting
Outstanding!!!
Just bought a kit! Thank you for this video and discount code!
Very well done! 👍👍👍
Pro tip.
Don’t start your drill until it’s already flat onto the surface of the glass so the edges of the abrasive pad doesn’t dig into glass.
Pro tip
use a right angle drill for more stability.
Wow, NICE, thank you, How about chips, I guess from road rocks etc.. same way?
I'm considering this as an option, haveto tackle the rear window... thats morea concern with the heated veins. Would you have a kit and or demonstration video for this?
We don't have a video on the rear window, however, we have one on a side window, the process is the same. In most cars, the heated element for rear windows is embedded within the layers of the glass, not on the outer surface, and if that's the case then the kit is safe to use.
ua-cam.com/video/mwys2VHlQ1c/v-deo.html
Would this also work for an aquarium?
Yes, our kit can be used on aquarium.
did you try this? How did you get on?
@matthewfrancis-mountford6654 yes, but u need way more pads and time than u think. I went at it for 8 hours and only managed to restore the scratched I made while trying to polish it and didn't manage to remove the original scratches. Best advice I can give is if u can just replace it Instead of restoring it.
Hi - would you recommend using this to remove hard water stains from shower glass, and if so what grade of cerium oxide and what grade of pad/s? many thanks
For this purpose, we recommend using our high grade cerium oxide or gp-pro glass polishing compound with a felt polishing pad. If the water stains are stubborn, you may need to use a two-stage abrasive process first to break down the deposits before moving on to polishing stage.
Let us know if you have further questions.
Can you use this on same sort of scratch on car windscreen
Yes, you can use it on car glass. Or you can use a similar kit that comes with more flexible backing pad: ua-cam.com/video/mwys2VHlQ1c/v-deo.html
Great video, thank you.
Can we use same process for Graffiti removal from glass?
Thank you for your enquiry. Our system can be used to remove graffiti damage. We have received your email and will get back to you within 24 hours.
Some pedestrian got angry that I was on the crosswalk trying to see oncoming traffic and resorted to keying my window. Now I have a scuff on the glass and replacement is $800.00, will try this with a professional.
Can this be done on windshields?
Please check this kit ua-cam.com/video/mwys2VHlQ1c/v-deo.html , the process is the same but the backing pad that comes with this kit is more suitable for curved surfaces.
Excellent info!!!
وسيله خیلی عالی هست .
What grit pad did you start with
In this video we start with P180 (GlasX 120 abrasive)
glasspolishshop.com/abrasive-discs-pads/xnet-abrasives/glasx-120-medium-grade-abrasive-3-inch-75mm
I used it on CRT Monitor Glass and it got the big scratches out but now I have a bunch of hairline scratches that i cant feel with my nail that create this shimmer on brighter colors. Any idea how to get these out? More polishing appears to be making it worse not better and I even used the second polishing pad.
It seems that the polishing process is highlighting the existing hairline scratches. This can happen when the compound penetrates the tiny scratches, making them more visible.
• Before proceeding with the polishing stage, it's crucial to ensure that all scratches are adequately removed. Spend extra time with the blue GlasX60 abrasive, focusing on achieving a nice, uniform haze across the area without any visible scratches.
• Once you have achieved a uniform haze without visible scratches, proceed to the polishing stage.
Well done!
Pro tip! Wear a mask. You don't want small particles of glass in your lungs.
Totally agree, sanding glass requires Dust Mask, especially if sanding large panes of glass, this is why all our scratch repair kits come with the Dust Mask.
@@GlassPolishShop "Do as I say, not as I did."
@@rogerborg i guess he doesn’t understand he made a video without a mask. Idiot
Why?
@@Martin-xh1hd Sillicosis lol
Will this work on a aquarium glass??
Yes, the kit can be used on aquarium glass. However, if the scratches are inside the tank, ensure the tank is large enough to allow proper maneuvering of the drill at the correct angle, along with enough space to control the drill and apply the appropriate pressure.
@GlassPolishShop thank you.
Is this for laminated glass and toughened glass?
Our system can be used on both laminated glass and toughened glass
Hello, Does your company have a kit for smaller glass, Like glassware, crystal? I have been asked to remove and engraving off a crystal trophy, Was wondering if the process is the same. Thank you
Thank you for your inquiry. To answer your question, the process for removing engraving from crystal is indeed the same as for scratch removal.
The smallest kit we offer is a 2-inch (50mm) kit. To better assist you, could you please share the size of the glassware or send us a picture at contact@glasspolishshop.com? This will help us determine if the 2-inch kit is sufficient for your project.
Great video thanks. Will this work on toughened glass too?
Yes, it can be used on the toughened glass
@@GlassPolishShop thank you
@@SummitOrNothing fancy seeing you here Trev 😜 did you try this and did it work?
I've tried doing this and whilst I got the deep scratches out, I'm left with a massive abrasive and hazy section that won't come out. I've used all the pads. Is there a specific grit sandpaper I can use to remove the abrasion? I started off with a few deep scratches, now I'm left with a big square abrasive haze!
Hi, You need to use the blue abrasive a lot more! If you have a hazy area after polishing it is more than likely you have not used the blue pad enough and still have marks left over from the green. If you have used the blue twice as long as the green it should polish up straight away.
Put it this way..... If you weren't left with the problem you have it would be miracle. Its taking the piss to make out like a first timer could get a great result with a DIY kit. This is why its a specialist field of work.
I'm curious about the optic distorsion seeing through the glass and sideway, how important is it ?
When using the abrasive pads is where you can create a distortion in the glass. You have to be mindful not to concentrate on one specific are for too long and try to use a bigger are to smooth it out on the rest of the pane. staying on one spot will create a dish like distortion and using too much of the edge of the backing pad will make it bounce on the glass causing ripple effect. Done properly there should be no distortion looking head on through the glass. Even with some tempered/toughened glass there is some natural distortion looking sideways on at the glass it also depends on how much damage you are removing and how deep the damage is.
@@GlassPolishShop This! Like drywall, glass is not actually perfect most of the time. It is a series of smooth, well spaced waves and undulations. But we will percieve it as flat.
Will this kit work on car windshields?
To help with optic distortion, make sure to keep the grinding discs as flat as possible. Keep heat to a minimum. Bellow 120 degrees Fahrenheit would be best.
To keep the grinding disks as flat as possible, it is best to use larger discs and a machine that is not a drill. A automotive type polisher is best for this as you can place your hand flat on the head of the polisher to hold the grinder on the glass, being careful not to press too hard. Let the abrasive do its job, pressing too hard will make it dig unevenly into the glass.
Another tip to avoid distortion is to keep the glass clean and dry. There is no need to touch the glass as he did, use an inferred thermometer to check temp. The oils from your hand will make the grinding disc slip thus leaving a high spot where you touched it. Also, hot glass and cold water is a recipe for broken glass.
Lastly, instead of only doing side to side motions while grinding, also do up and down motions. Alternating each time you go over the repair area. Always step out the repair area half the width of the grinding disc each time you do a pass.
Hope this helps! 😊
Would this work on windshields on classic cars?
Yes, this will work on automotive glass.
@@GlassPolishShop Can the scratch be filled with some sort of resin like "windshield crack repair" and become almost invisible?
please wha s the granulation of green and bleu disc?🙏
if you mean how abrasive the pads are, you are looking at green 500 and blue 800
@@GlassPolishShop thankx a lot
Hello sir i purchased your product today can it remove welding apot from reflecting glass
Thank you for your enquiry. This kit is suitable for scratch removal. If you wish to remove the grinder and welding splatter damage, please drop us an email with a picture of the damaged area, and we will get back to you with the solution.
I used a product called “Bio-Clean hard water spot remover” and only in sunlight at certain angles you can see the abrasives in the cleaner have left scratches… what do you recommend just the polish?
Thank you for your inquiry. To address light spiderweb scratches, you can use cerium oxide or a glass polishing compound along with a felt polishing pad for effective removal. It is recommended to use a rotary device, such as an electric drill or rotary polisher, for optimal results.
Does this work on automotive glass?
Yes, our kit can be used on automotive glass. You may also want to consider our similar kit, which includes a more flexible backing pad. This feature can be particularly useful when working on curved glass surfaces: ua-cam.com/video/mwys2VHlQ1c/v-deo.html
@@GlassPolishShop thanks. My car's drivers window has numerous deep scratches in it and it's not an easy part to find. This might help me fix it. Do you ship to US?
@@asteffenson88 yes we do ship to US.
I have a glass dining table with white finish yes i can remove the scratches but how do you make good the paint?
Thank you for your inquiry. We do not recommend polishing glass if the surface is coated with paint or a film, unless the coating is within the glass layers. If the coating is on the outside, it may be removed during the polishing process.
Very helpful information could you tell me what grit of sand paper are you using in step 1 and 2.
Thank you for your enquiry. Step one GlasX120 (P180) and step two GlasX60 (P500)
muy buen dia donde consigo el producto muy bueno excelente distribucion para colombia gracia
We currently do not have a distributor in Colombia; however, we ship worldwide via DHL Express. You can visit our website at: glasspolishshop.com/.
Great vid..how much would a professional charge for that?
Our rates depend on the nature and scope of the job. We typically charge either a day rate or a call-in charge for smaller tasks. For the type of damage shown in your video, this would fall under our call-in charge.
Hello! Works this also on a mirror?
Yes, it can be used on a mirror. We uploaded a short video a moment ago:
ua-cam.com/video/-dFwoqyz47M/v-deo.html
Can I remove small scratches from my car windshield with this?
Yes, you can remove scratches from your windshield, just be mindfull to check it does not have an exterior coating that could end up being removed when using an abrasive. glasspolishshop.com/automotive-care-repair?product_id=374
polish compound are cerium oxide, white cerium are fast result
What hand drill are you using. Is it a drill or polisher? RPMs? It is not on your website. Can you use any P180 and P500 sil carbide discs?
This is a standard electric drill, with a recommended RPM range of 1500-2200. We recommend using a corded drill rather than a battery-powered one, as it allows you to maintain a consistent speed while applying pressure during polishing.
The abrasive discs used in the videos are: green P180, followed by blue P500. Please note, not all silicon carbide discs are the same in quality or performance.
Can this be performed of tempered glass?
yes
I had purchase ceric dioxide. Is there disadvantage to this product? Not getting good results.
Cerium oxide is a polishing solution ideal for the final polishing stage or for removing superficial scratches. However, if you need to remove deeper scratches, the surface must first be sanded down and then polished, as demonstrated in the video.
Will this work on tempered glass or will it shatter?
Yes, our system is suitable for use on the tempered glass.
can you advise how to repair scratch on convex acrylic lenses?
Hello,
Could you please specify the shape of your lens, whether it's Spherical or Cylindrical? Additionally, it would be helpful to know the intended use for the lens. If you can, kindly send us an email with a picture so that we can provide you with more detailed assistance. Thank you.
Do you recommend this kit for glass aquariums? Mine has some minor scratches. They're not deep, they're more like the result of cleaning with a regular cloth or paper towel. I'm unsure if I should just live with them or try to get rid of them. I would much prefer to have them removed and enjoy a crystal-clear view of my tank and fish. The area is similar to the one in this video.
All our DIY kits can be used to polish fish tanks. You can send us an email with the size of your aquarium and pictures of the scratches, and we will get back to you with a recommendation.
@kekomixtle did you try this? How did you get on?
Does this work well on upvc double glazing?
Thank you for your enquiry. Yes of course this works well on upvc double glazed windows, in fact the glass we are repairing in the video is a double glazed unit.
@@GlassPolishShop Do you need to be aware of anything else that could go wrong, film on the glass etc?
In general no there is nothing else that could go wrong, if you are working on laminated or float glass then you should keep the temperature in check because overheating can cause it to crack, as long as you follow the step by step instructions and take your time you will be fine. If you mean a manufactures coating on the glass then in a double glazed unit the coating is inside the glazed unit so there will be no problem with that. If there is an after market window film on the glass then it has to be removed before any repair can be done.@@TimHarrison1
@@GlassPolishShop Cracking due to heat is my biggest concern. How hot is too hot? How do you know without touching and how often should you spray cold water on it?
You can use an infrared thermometer to check the temperature. If you don't have one, the only way to gauge the glass temperature is by using the palm of your hand.
The maximum temperature you can reach during the process depends on the type of glass you are working with. For example, mirror or laminated glass can reach temperatures of up to 48 degrees Celsius, while tempered glass can go as high as 82 degrees Celsius.
can you use this technique on ceramic/glass cooker tops?
Thank you for your enquiry. Yes of course you can use this product and technique on ceramic glass cooker tops, the only thing to watch out for is the plate ring marks because if they are painted on the top of the hob as opposed to the underside they can easily be removed due to the abrasive nature of this kit.
Should you have any doubts or require further assistance please don' hesitate to contact us.
If you use this process on glass top stove, will it remove the burner rings that mark the burner space on the surface?
Yeah
All stove tops are different, some are underneath the glass, but most are on the surface. Using the abrasive pads can/will remove the markings. The polish used at the end of the process will not.
Can we use this to any glass watch?
You can use a polishing compound and polishing compound but we do not recommend using abrasive discs to polish watches.
Hi I bought DIY Glass Scratch Removal Kit 75mm do you think I need more pads?
Thank you for reaching out to us regarding your DIY Glass Scratch Removal Kit. While we would love to provide you with guidance on whether you need more pads, it's important for us to understand the specifics of your project to offer the most accurate advice.
Could you please send us an email with the following details:
The number of panes you'll be working on.
The size of each pane.
The percentage of damage on each pane.
Once we have this information, we'll be better equipped to assess your needs and provide you with tailored recommendations.
email: contact@glasspolishshop.com
Is it safe to use on glass with coatings? Low E, etc..
We do not recommend polishing glass with coatings, such as Low-E coatings, as the polishing process may result in the removal of the coating.
Does this work on a mirror?
Yes, our kit can be used on the mirrors.
Please refer to the link to watch the video:
ua-cam.com/video/cxO9FLJd7e4/v-deo.html
ua-cam.com/video/-dFwoqyz47M/v-deo.html
Will this work on a domestic house window ? Glazing company told me it was impossible to polish / grind out a scratch, but this looks like it would, unless the grade of glass is somehow different from what i'm looking at on my house window (that has much thinner scratches than processed here)
Hi James,
Thank you for your inquiry. Our kit can indeed be used on house windows. However, before you decide to try the kit, please send us an email at contact@glasspolishshop.com with a picture of the window, the size of the pane, and if possible, please mark the scratched areas. We need to assess the size of the damage to determine whether you should choose the DIY or a PRO kit.
My husband used a knife to remove labels from our glass doors and left scratches. Would this work to remove these?
Yes, our kit can be used to remove scratches left by the knife or any other sharp object.
Which grade of the pads are these??
GlasX120 - bit.ly/3AXnH3X
GlasX60 - bit.ly/3VAsphu
Will this work on auto glass?
Yes, it can be used on auto glass. You can also check out another kit that comes with a more flexible backing pad, which is suitable for curved glass:
ua-cam.com/video/mwys2VHlQ1c/v-deo.html
@@GlassPolishShop thank you I will look into it.
Hi, Will the polishing liquid work on a black porcelain tile with mirror finish?
Our glass polishing compound can be used to polish porcelain tiles with a high gloss finish, however, it will not remove scratches from the tiles.
Will this process remove very fine pits (super tiny chips) in a windshield?
If you want to remove pits from the entire windshield, we recommend using a 5" kit with the rotary polisher
ua-cam.com/video/7lQDVlqKWBs/v-deo.html
The 3" kit is recommended for small areas only.
Wow that's amazing! Are these pads a Rayon? I only scene this done with Ceriglass and Rayon. Very interesting. Great info and video!
Hi, The felt polishing pads are Rayon, and the sanding discs are made of silicon carbide
Where can I buy it . I hit the glass door with a grinder terrible mistake via not to deep can this product help me
link to the product under the video description.
Please email us a picture of the damage so we can help pick the right product.
I have a pinball machine backglass that somehow got a few nicks; I am a bit concerned that if I try something like this, it might turn out worse. I wouldn't mind doing it for a very small area, and by hand.
Please send us a picture of the damaged area to contact@glasspolishshop.com, we will et back to you with advice.
Can I used a normal corded drill or do you have any recommendations? I have called around in my area all the numbers I could and they all want to replace my glass. I have dog scratches only and am now considering doing it myself
Our DIY kits are designed for use with an electric drill, however, if you plan to work on the larger areas we recommend a PRO version and a rotary polisher with the variable speed control .
Google Milwaukee M12 Polisher. Great little polisher but its best to buy it with the large battery.
Hope do notice me, how about on pc monitor glass? It is the same process on a way...
We do not recommend polishing any LCD, LED, OLED, Plasma or any other types of screens.
Will this work on automotive glass???
Yes, it can be used on auto glass, however, please check our different kit which comes with a more flexible backing pad more suitable for curved surfaces.
ua-cam.com/video/mwys2VHlQ1c/v-deo.html
Can you do this on a fish tank what's the best thing to if so can you send me a link so I know what to get inside my fish tank
yes, this can be used on a fish tank. Please see the following link for the kit we recommend: glasspolishshop.com/glass-restoration/scratched-glass-repair-kits/glass-scratch-removal-kit-do-it-yourself-xnet-system
did you try this? How did you get on?
I have small dots all over my front windshield without any deep scratches. How much should I order to cover entire windshield on a hatchback?
If you think of polishing the entire windshield, consider using a 5-inch kit with a rotary polisher instead of a 3-inch kit with an electric drill.
The 3-inch kit is suitable for small areas or spot repairs but not large panes.
@@GlassPolishShop Will do. Thanks for advice.
@@GlassPolishShop vous pouvez me donner vos adresses et vous votre téléphone
I have a very small scratch that I can feel with my fingernail on a expensive aquarium inside glass. Will this method affect optical clarity or be noticeable during viewing the glass ? Can I do just the small affected area ? Ugh I’m nervous.
Hi Steve, thank you for your inquiry. If used correctly you should not distort the glass. You wont need to polish the whole tank but you will need to make the damaged area a little bigger when using the abrasive to avoid getting a distortion and blend it in.
did you try this? How did you get on?
Will this work on car windows
Yes, it can be used on the car glass, you can check another video here: ua-cam.com/video/mwys2VHlQ1c/v-deo.html
Can you provide link to the kit to purchase?
You can find the kit following this link: glasspolishshop.com/glass-restoration/scratched-glass-repair-kits/glass-scratch-removal-kit-do-it-yourself-xnet-system
It's ok for home use but I worked for years in a glass factory and we just use a buffer wheel and cerium?
Be nice to know what grits at what stages and what type of abrasives
Full product description and step-by-step instructions can be found in the link under the video.
Can i use this on black stove top glass
Hi, yes this can be used on stove top glass , but be careful of the stove markings on the glass
How much real time did that take to accomplish, I'm sure it's different than paint
The scratches were quite deep (caused by the P120 diamond pad), and it took approximately 40 min to complete the job.
@@GlassPolishShop not bad I was thinking a few hours ,thank you for replying so quickly
Are different compounds being used for different stages of the pad? If so which ones??
The polishing compound is used only at the end of the process. The two-stage sanding process is performed dry, as you can see in the video.
Can I use this method on acid etched graffiti on commercial glass door?
I have the same issue, any luck on your end?
Yes, you can use the same method on acid graffiti.
@@GlassPolishShop Much appreciated!
How do I find out if my appartment window class has a coating?
Hi,
• Look for any markings on the glass itself. Manufacturers often label windows to indicate if they have special coatings. This information is typically found in one of the corners of the glass.
• Examine the window glass closely. Some coatings, like Low-E (Low Emissivity) coatings, may not be visible to the naked eye. However, if there's a reflective or tinted appearance to the glass, it might indicate the presence of a coating.
How long did this whole process take?
Thank you for your inquiry. The time required for the process really depends on the depth of the scratches and the size of the area. In the video, the scratches were quite deep, and as a result, the entire process took about 40 minutes. Keep in mind that for shallower scratches or smaller areas, the process might be quicker.
where can i buy in the US?
The product is available on Amazon:
please use the code B007CJJLIY on the Amazon search bar.
can we use black and decker compact drill 18v 20nm torque machine for this use ? or any specific specification of drill machine for use
We recommend using corded drills over the battery operated.
Is this process applicable on car windshield?
Yes, you can use this process on a car windshield.
@@GlassPolishShop Hey mate, I'm just wondering what grits the green and blue sanding pads have. Also, what compound do you use for polishing? Regard,Dejan
@@tdejan8 Green P180, Blue P500, polishing compound GP-PRO 2.3 microns
glasspolishshop.com/polishing-repair-compounds/glass-polishing
That was great thank you!
does this work on windscreens, doesn't it leave a recess in the glass...
Can you clarify what you meant? Are you referring to the distortion?
How's it going, I've a very faint scratch on the windscreen,so would cerium & a da polisher be correct for removing it...
Please & thanks in advance 👍
You can use "whitening toothpaste" to remove the "deep" scratches and finally polish the glass with cerium oxide. No need for tools. Newspaper works well as a substrate for these abrasives. Don't go near the windscreen with abrasive pads like Scotch Brite. PS I'm an amateur optical designer and telescope lens(mirror) manufacturer.
@@jeromejooste3493 thanks very much for your advice.
If the scratch cannot be felt with you fingernail then our Pro Polish Cerium should be able to remove the scratch. If it can be felt you may want to use a fine abrasive then the polish.
Is this safe to use on the inside of an aquarium? Is it dangerous for the fish?
Thank you for your inquiry. Our product is specifically designed and formulated to be safe for use on glass surfaces, including the inside of aquariums. It is non-toxic and does not contain any harmful chemicals that could pose a danger to fish or other aquatic life.
Remove any fish or other inhabitants temporarily during the polishing process and thoroughly clean and rinse the aquarium when you are finished.
did you try this? How did you get on?
When removing hard water marks with this system, do you need to sand it first or can you use just the cerium
Thank you for your inquiry. Yes you can start with the cerium as this will remove most hard water stains on glass.
This works car front glass?
Yes, it can be used on car windshields, however, if you are planning to polish the entire windshield we recommend using a 5-inch kit with a rotary polishing machine.
The DIY 3-inch kit and electric drill are suitable for small areas.
@@GlassPolishShop Im planning this summer will use toolkits. But my car front windshield and front lights fully scrached from sandstorm. Windshield look so many small scratch. im afraid of is it will work?. In night can't ride a car, can't see front of glass.
@@sukhee5 Thank you for your inquiry.
If you are planning to restore the entire windshield, we recommend considering our PRO kit over the DIY kit. The PRO kit includes 5-inch components and is designed for use with a rotary polishing machine, which is more suitable for working on large panes of glass.
Please refer to this video ua-cam.com/video/7lQDVlqKWBs/v-deo.html to watch the PRO kit in action.
Hi, do you offer training, Thanks.
Thank you for your inquiry. Yes, we do offer training either at your home or work place or we have a training facility in Dublin, Ireland
I need to remove a scratch on black glass, can I use this kit?
If the glass is tinted by the manufacturer, then the answer is yes, you can use the kit. Please refer to the link to watch the video on how we restore the black coffee table: ua-cam.com/video/gDa4Zes2KgE/v-deo.html
Will this work on a car windshield?
Yes, our kit can be used on car glass.
What grit is each pad?
GlasX120 - bit.ly/3AXnH3X
GlasX60 - bit.ly/3VAsphu
@@GlassPolishShop Can you use any P180 or P500 pads? or are your specially made?
Can temper glass usage?
Yes you can use our system on tempered glass
Can you clean the mirror, I tried but it didn’t work???
Thank you for your inquiry. Mirrors, like ordinary glass, can be polished using our system. However, when working on mirrors, you will need to pay closer attention to temperature control during the process compared to working on standard glass.
To assist you further, please send us a picture of the mirror you wish to polish, and let us know the specific type of damage you are looking to address. Whether it's scratches, haziness, or any other issue, providing us with these details will help us provide you with more precise guidance.
You can email us the information and images at contact@glasspolishshop.com.
Hi, I sanded down my glass shower panel (1 out of 3) which was horribly etched due to 12 years of limescale. I think i have not used the blue disc enough, as after i used teh 3.5micron cerium oxide paste, I still have haze. My question is which is the best paste to use for polishing? On your website you have 3.5micron, 2.5, 2.3, 1.2 as well. I only have the highest grade right now, which one should i use as a final polishing step, 2.5 or 1.2?
Thank you for your inquiry. If you have sanded glass using our abrasive discs, we recommend using GP-PRO glass polishing compound (2.3 microns) for the final polish. Please note that in order to polish the glass, you will also need a felt polishing pad. If you need further assistance, please feel free to leave a comment or send us an email at contact@glasspolishshop.com
Thanks, but why u didn't mention the sandpaper grades for each process ?????
Thank you for your inquiry. It is easier to remember the color code for each stage than the grade number. If you would like to learn more about our system and the grades, please visit our website (link in the description). There, you can find all the consumables with additional information used in the video.
if the scratch is not deep, could i skip the green one?
if scratches are light, then you can skip the sanding process with the green discs.
@@GlassPolishShop
can you do this on th side window?
will it effect the view angle and will it be a little "bend" from the outside?
@@densan92 please refer to the link to watch the video of removing scratches from the side window. If you follow the steps correctly you will not see any distortion.
ua-cam.com/video/mwys2VHlQ1c/v-deo.html
I can't remove the haze at the rear Windshield po my car what kind of grit should I use?
You should polish it a bit longer with the GlasX60 blue sanding disc before final polishing. Please check the instruction for step 7
How many RPMs does the drill have?
I’m sure you can’t just use any drill, it must meet certain specifications if you want a timely pro result.
We recommend between 1500-2000rpms and the drill with high torque. Most electric drills generate that sort of speed. Try to avoid using battery drills due to low torque. Low torque will slow down the drill while putting pressure on the pad.
Your q of rpm has been answered but most drill don't hv indication of rpm. So does such q make any sense in the first place.