Lexus IS200 Turbo Build | Episode 2 |
Вставка
- Опубліковано 19 сер 2024
- Part 2 of my is200 turbo build, sharing my journey with you guys. No mechanical qualifications so if I can do a budget build, then most of you car enthusiast can. Make sure to like and subscribe for more upcoming upgrades.
Click the link below
Part 1: • Lexus IS200 Turbo Buil...
Test Drive: • Lexus IS200 Turbo Buil...
Engine components:
T3 turbo mounted on a custom 2JZ-GE manifold with the 1GFE flange
Large front-mounted Intercooler with aluminium pipes and silicone hoses
Turbo Oil feed with tapped VVT bolt and return lines - Later upgraded to AN fittings and stainless steel line
Sump oil tap- Later upgraded to stainless steel line
5M Fuel return hose
Downpipe connecting to full decat exhaust with 3" tailpipe
Patricks Black box fuel cut defender
Boost gauge and I later upgraded to AEM wideband
Rising rate fuel pressure regulator
Air filter for Turbo
Blow off valve
Upgraded to bigger 1ZZ injectors
Upgraded cooler spark plugs IK24
I got same engine on my tezza, and to be honest I was looking to swap engine to a 1uz or 3z or maybe a 2jz vvti or 1jz vvti.. but is awesome how this 1g sounds.
Good video, 1g-fe 💪
Good engines. Subscribe to support
Nice video , keep pushing and building we look forward to more content
Thank you! Will do!
It’s good if I give arround 7.000 euro for my is200.turbo ecu cooler hammer pistons manifold exhaust bolts and what other need.
Exhaust, fuel lines, oil line and fittings, ecu
Sounds great
1:18 ayyyy
Great video!
Thanks
Don't think that rtv can handle a turbos hot side even remotely. Been much better without it. Exhaust sealer would be a closer bet but that shit don't hold up either.
It held up pretty fine for half a year. Decided to play it safe and change the manifold flange, welded a new one on with new gasket.
Oof, RTV on the turbo flange? Seems like it would burn up almost immediently. But other than that its a cool build.
Been fine but thankyou
Mad video man. Used a lot of it as reference as I have been getting everything myself instead of using a kit so thanks a bunch. Only question though is when you removed the oil pan did you manage to find a gasket to put on or did you use rtv silicone around the oil pan?
Thanks, glad to help. I used rtv to seal oil pan
why did you put a sealant under the turbine, there are 700 degrees, everything will burn and a leak will appear.
RTV has a very high melting temperature, would not affect it. Reason I did use was because there was a small gas leak due to bad welding. I have now recently removed old t3 flange and welded a new one on
@@BrianVibert1 This is an ordinary silicone sealant, made in China, for the exhaust there are completely different sealants coming. After welding, the flange must be sanded, then no sealant is needed.15mm tube needed to drain
Had no issues with the rtv, ran for 1 year and then I changed the t3 flange. All in all everything is updated from first install and safe. As mentioned its a working progress when it comes to budget builds pal. Cheers
Also, them magically appearing AN lines tho
ha, well as mentioned in description I upgraded the lines to AN
how did you make your turbo make that noise SUTUTUTUU. My makes SUUUUU XD
Slap a fast turbo on it
I want you install one for me??
Don’t want any silicone in your sump, easy way to block a hose should any lose bits come off, gonna give you a headache if you’re unlucky enough
Been okay after 4 years, may have got lucky
@@BrianVibert1 I’m sure it’s fine, it’s your car after all do it how you like
I am kindly asking for ur wat's up line??
what size oil and fuel lines did u use mate? really good vid👍
AN6. Thanks bud. Oil return was AN10
@@BrianVibert1 is an6 ok too?
@@joelpaal4699 Should be but an10 will be better as less restriction
there is no oil cleaning on the oil supply bolt in the drive-in, all the dirt from the pan goes there directly bypassing the filter. the vvti valve has a fine mesh inside, under this bolt, and you have nothing.
Vvti valve still has mesh. It is a tapped vvti bolt. Nothing is removed, only added with the oil supply
Hi, thanks for sharing your experience. Little question, how do you do regarding the afr? Is it closed loop with the O2 wb sensor and the piggyback ECU ? Thanks
Stock ecu. Fuel cut defender with fpr and 1zz injectors. Subscribe to support
What make is the piggyback ecu
Not got one, it is on a fuel cut defender
Mate need some help, need in-depth on how to get oil feed to turbo from the vvti what exactly did you do
need to tap into engine oil feed to the same size an fitting you want. Run that to your turbo with the right fitting
Hey Brian, I like your build man. I took the opportunity to upscale your video and I wanted to see if you want any help increasing video quality?
I can send you a link to the unlisted video of yours that is upscaled. If you like It I can help you on some more videos, but they take long time to process but comes out looking pretty nice in 4k.
Thanks pal, yeah sure
Subscribe to support my channel
How much power as result do you have?
241bhp
Hay bro how did you pulg the fuel cut defender in piggy bank to the ECU
It needs to be directly wired to ecu
@@BrianVibert1 got any pictures on how you done it
@@BrianVibert1 do you no how two wire it into the ECU
@trisplazz7792 It was a long time ago when I did mine. There should be instructions given when you purchased the FCD
@@BrianVibert1I got the fuel cutter from Japan in it's in wrong language I just need to know what wire to cut
Hello small questions, I saw you blocked off the external wastegate, why not external? Is the 2j external wastegate position good or custom log type manifold is better?
Didn't have the budget for external at the time. But will definitely look to upgrade in the future
Hey bro do you recall the size of the banjo bolt you used for the fuel feed?
M16 I believe
Any chance you can send me a pic off the wiring diagram for piggy back
Yes can do. What platform?
@@BrianVibert1 can you send me a pic of the wiring diagram too please? on instagram or email thaanks
I bought full kit turbo without Regulator & fcd does i need important or not? Thanks
Definitely need a fcd otherwise will have major fueling issues
Dose i need change the Radater or urs working good not overheating
Works fine, no overheating at all
Where did u get the kit i want one but cant find any second hand
My was a diy kit, mostly ebay parts
What did you do with the air sensor and what kind of turbo was used?
Air temp sensor is ran to the throttle body pipework. Drilled small hole and inserted sensor into pipework with rubber bung to make a seal. T3 turbo
Subscribe to support
Brian Vibert thank you
Hi mate, just wondering what exhaust manifold have u used ? I can see it has custom flange but is it a 1g or 2j mani ? Thanks
Hi buddy, it's a 2j manifold with custom 1G-FE flange welded. The external gate on the flange has been blocked off. Subscribe for support
Thanks mate, iv recently bought a supercharged IS200 but after only a week I decided I want to go turbo, think il pick up a 2j mani and gonsame route as you :)
@@joshnicholls2770 Good choice, Turbo all the way. Let me know if you want any other advice
@@BrianVibert1 are the 1g and 2j manifold similar?
@@gokuoce6098 No their different
Love it. Did you have to wire the two lambdas in the down Pipe Together?
Also you getting any check engine lights without any cats?
Yes I wired the two o2 sensors together, to prevent cel
Was the wiring a hard job and how did you know which one is bank1 sensor1 and sensor2?
@@BrianVibert1 any videos or descriptions showing how to wire the lambdas together ??
@@jackwycher No videos but essentially cut the end of one off and then splie that into the second one matching the colours. Solder them for better connection. Easy Job
what air intake is that? what size tubing?
2.5" ebay airintake
Dose i need Regulator and all the pip full return from the full bump or not ?
You need a regulator to adjust the pressure, otherwise will have fueling issues
Brian Vibert I just want know where i can get air Vacuum for regularator ?
@@khaledalenzi342 Ive mentioned in the video where to connect the vacuum hoses
I’m in the middle of doing a turbo build myself. How did you deal with the wiring when it came to the two o2 sensors from the manifold? My downpipe only has one hole, did you just splice the two sets of wires into one sensor and that’s it? Or is there something else you did on the ecu wiring itself (other than the fuel cut defender being wired in)
Thanks!
Yes splice the two o2 sensors into one
Subscribe to support
Brian Vibert thanks mate! So there’s nothing to do with the wiring at the ecu? Literally just join the two sets of wires into one at the sensor?
@@MrAaronPage Yes that is what I did. However, I had issues with the last sensor under the car in which I bought a emulator to solve this
Brian Vibert ah ok, that’s the one that bolts into the centre section of the exhaust right?
Heyy....where did you get your manifold????can u send a link
Its a 2JZ manifold with 1GFE flange welded on. Subscribe for more thanks
@@BrianVibert1 2jz gte or ge manifold?
@@miguelvicente4059 ge
@@BrianVibert1 thanks matte 🤜
what manifold are you using?
2jz manifold with a 1G-FE flange welded on.
Subscribe to support
What fitting is that you using to the from top of engine ?
Can you be more specific, oil feed fuel feed?
Brian Vibert oil feed ?
Tapped the original vvt bolt to fit an-6
what blow off valve are you using?
None
Used a HKS inially but wanted more flutters from turbo and decided to run without. Been safe since
Hello ,intake is 2'5 ? what's the diameter of aluminium pipes and silicone hoses ?
Throttle bottle side is 2.5" and the intake for turbo is 3"
So the throttle side pipes and hoses are 63mm diameter? Im wondering which hoses to buy 63mm or bit biger 65mm
@@TheMsPitero Yes 2.5" for throttle body side. Personally, I would go for the 2.5" (63mm) couplers as you will get a tight fit and no boost leaks. Helps to spray a little wd-40 to get couplers on
@@TheMsPitero Subscribe to support
@@BrianVibert1 I'm already subscribing man ! :D
HP?
240
@@BrianVibert1 oh, cool!
@@BrianVibert1 internals stock?
It is yes