I used bright tone once....liked it but ran out and my funds ran a little low and delivery was gonna take a few days and I had orders to fill so I used Minwax Polycrylic and it worked perfectly at almost 1/2 the cost....so I now use Minwax polycrylic and if I run low I can just run to my local walmart or any of the 20 hardware stores and grab some.
Girl I feel you on not switching up your process, like girl why?! like you said, do what works for you! Thanks for being so honest, appreciate your tutorials! God Bless, xoxo
Omggg I love your personality and I love how you keep it real ❤️ a lot of people like to please others and I’m not like that I’m gonna be me and that’s it!!! Love the glitter colors and this cup came out really cute!!!
Hi, new to your channel & your video is EXACTLY what I was in need of! Thank you so very much for your helpful honesty & for keeping it funny & real!!! I am no longer confused about how to do Tumblers using my Crystalac Brite Tone! (Bought it, but it's been sitting for a very long time! 😔) I will search your channel for the other sealers you mentioned! I love both orange & yellow so your tumbler is giving me life!! 😍 Your decal describes me to a T! Lol 😂 New subscriber! 😊❤ I'm so excited to get started!!!!!! 🤩🥳
Monica!!! Whatever video you do, I'm watching!! I love your videos. Thank you for being so real and just authentic. Listen you black girl magic for real. One day, I'm gonna actually make a cup instead of buying all the supplies.
I just found your shop today and want all these glitters used in this video. I'm so sad I can't find them, BUT I did find some beauty's and if these glitters are everything I perceive... I'm a loyal customer for life.
I’ll be purchasing some glitter from you ! Ive been watching your videos while on elliptical, and I’ve learned a lot! I’m definitely supporting your business!❤
Gr8 video & tips regarding BT!!! I been using BT almost a year now and recently have been notified of 3 cups that I made for fam/ friends that the bottoms have started to crack or peel off. Now I did give care instructions for each tumbler and they "say" have followed the instructions. Giving them the benefit of the doubt that they have...they have stated the cups were for toddler of age 3-4yrs of age. Other than the possibility of the cups being placed on a wet surface, what else could cause the cracking or peeling after each cup cured for 12 days b4 shipping and was shown pics of each cup after they received them in condition as when shipped them? Apologies for the short novel lol. I wanted to be as clear as possible in explanation. Looking forward to more of your videos & tips!!! Til next tyme...keep those cre8ive juices abrewing!!!
As usual, you did that! I love it over here in the real world!😂 I like BT/GF, but I need to hear the real! Also, my 4 y.o girl came near the end to see and she said, "That looks fantastic😍!"
Thank you for making this video!!! Those Crystalac fanatics will make me feel I can ONLY use Crystalac products. I love my mod podge and was hoping I could still use it with Brite Tone or Grand Finale.
now i'm wondering if you could use minwax polycrylic on a cup like brite tone...i know some people use it as a sealer for glitter, but i wonder if you could use it for the whole project. and since it is only on the outside of the cup, I *personally* wouldn't be worried about "FdA aPpRoVE"
They are also food safe once they have fully cured. So there isn't a problem using it. I did a lot of research trying to find a difference between the crystal act brand and just a polycrylic and can't really find a difference lol.
Hello there. I’ve been making tumblers using crystalac for 4 months now. I’m noticing in my squeeze bottle, my coats of BT get tiny little gummy wads of BT that hinder the smooth finish. I’m trying to decide how to explain it. Like little pieces that are drying or trying to dry. But I keep the squeeze bottle tip meticulously clean. So I finally decided to just replace what was in my bottle with more from my quart supply. What was in my tiny dispenser bottle had maybe been filled 2 weeks prior, so it wasn’t old but i cleaned out my squeeze dispenser and opened the quart of BT and it was FILLED with HUGE pieces of what looked like jelly. The lid was secure so it hadn’t been semi drying. So I got a paint filter and got every tiny piece out possible. All seemed well for a few coats after refilling the squeeze dispenser. However, I am now, again, beginning to see the tiny wads of jelly like pieces within my top coats again. What could be causing this repetitive problem? Have you experienced this?
I subscribed at "If you not gonna pull up, it don't matter".
I used bright tone once....liked it but ran out and my funds ran a little low and delivery was gonna take a few days and I had orders to fill so I used Minwax Polycrylic and it worked perfectly at almost 1/2 the cost....so I now use Minwax polycrylic and if I run low I can just run to my local walmart or any of the 20 hardware stores and grab some.
I love watching your tutorials! You are are so helpful and honest!!!!
You had me at "my hands stay ASHY"!!! LOL 😂
Girl I feel you on not switching up your process, like girl why?! like you said, do what works for you! Thanks for being so honest, appreciate your tutorials! God Bless, xoxo
You have me cracking up beef in the crafting community
Omggg I love your personality and I love how you keep it real ❤️ a lot of people like to please others and I’m not like that I’m gonna be me and that’s it!!! Love the glitter colors and this cup came out really cute!!!
Hi, new to your channel & your video is EXACTLY what I was in need of! Thank you so very much for your helpful honesty & for keeping it funny & real!!! I am no longer confused about how to do Tumblers using my Crystalac Brite Tone! (Bought it, but it's been sitting for a very long time! 😔) I will search your channel for the other sealers you mentioned! I love both orange & yellow so your tumbler is giving me life!! 😍 Your decal describes me to a T! Lol 😂 New subscriber! 😊❤ I'm so excited to get started!!!!!! 🤩🥳
Few minutes into your video & I already love you 😅. Funny, classy, to the point. Love the designs! Thank you for sharing!
Finger cot is a great idea. I don't care what they say. That stuff gets into your system!
I love your content, it's knowledgeable and funny. Keep it real dear.
Monica!!! Whatever video you do, I'm watching!! I love your videos. Thank you for being so real and just authentic. Listen you black girl magic for real. One day, I'm gonna actually make a cup instead of buying all the supplies.
Make the cup! Once you make the first one you will only get better and find the way you like to do it
First time on your channel. Definately suscribing!!! Thank you for sharing!
I just found your shop today and want all these glitters used in this video. I'm so sad I can't find them, BUT I did find some beauty's and if these glitters are everything I perceive... I'm a loyal customer for life.
The glitters used for this cup are Sunset and Firefly and are available. Hope this helps!
I’ll be purchasing some glitter from you ! Ive been watching your videos while on elliptical, and I’ve learned a lot! I’m definitely supporting your business!❤
I love how you did this
Gr8 video & tips regarding BT!!!
I been using BT almost a year now and recently have been notified of 3 cups that I made for fam/ friends that the bottoms have started to crack or peel off. Now I did give care instructions for each tumbler and they "say" have followed the instructions. Giving them the benefit of the doubt that they have...they have stated the cups were for toddler of age 3-4yrs of age. Other than the possibility of the cups being placed on a wet surface, what else could cause the cracking or peeling after each cup cured for 12 days b4 shipping and was shown pics of each cup after they received them in condition as when shipped them?
Apologies for the short novel lol. I wanted to be as clear as possible in explanation.
Looking forward to more of your videos & tips!!! Til next tyme...keep those cre8ive juices abrewing!!!
As usual, you did that! I love it over here in the real world!😂 I like BT/GF, but I need to hear the real! Also, my 4 y.o girl came near the end to see and she said, "That looks fantastic😍!"
awww thank you
I learn how I enjoy your channel and the work you do
Yes, I would love a video on different coatings.
Thank you for this! Looks great😊
I love your videos girl 😂❤️
Baby girl I live for the stories part time job comedian for sure you are hilarious
What are the care instructions for the finished Brite tone cup? Is it dishwasher safe?
With the utmost respect I haven't heard any dra
Great video Mon, love ya girl
❤️
Thank you for making this video!!! Those Crystalac fanatics will make me feel I can ONLY use Crystalac products. I love my mod podge and was hoping I could still use it with Brite Tone or Grand Finale.
you absolutely can! girl they be trying to guilt trip but imma use what i got
I literally just laughed out loud at the “you ain’t gonna pull up”… cuz B.A.B.Y. these internet gangsters are beyond me 🤣😂
Real tough typing on a keyboard 🤣
Same. Best line ever.
I have crystalac. I hope it is still good. I wanted a easy why to work with it. But crystalac people are crazy!
Can you use mod podge on fresh spray paint?
I love your videos. Which do you recommend for beginners, epoxy or the house Brite-tone.
Heyy I LOVED your tutorial. However, I have a question, can I use Polycrylic Clear Gloss instead of using the Brite Tone ?
Also I’ve made glitter wine glasses with this but everytime you pick up the glass glitter gets on your hand is this the same?
now i'm wondering if you could use minwax polycrylic on a cup like brite tone...i know some people use it as a sealer for glitter, but i wonder if you could use it for the whole project. and since it is only on the outside of the cup, I *personally* wouldn't be worried about "FdA aPpRoVE"
I actually looked it up and you can use minwax polyacrylic! you would just have to wait 28 days for it to cure completely for it to be food safe!
They are also food safe once they have fully cured. So there isn't a problem using it. I did a lot of research trying to find a difference between the crystal act brand and just a polycrylic and can't really find a difference lol.
Can I use this on plastic sports cups?
What is your website for I can buy your glitters. I am new. Thanks
Periodsixglitter.com
Is Brite tone more economical to use than resin? Or more expensive because of how many layers you need to use?
theyre actually about the same in price when you look at price per ounce versus how much you need per cup...with brite tone you pay in time
Can you do an epoxy sanding video because that’s my struggle!
No glove no love lol
Hi how long do you wait for the modge podge glitter to dry?
A few hours at least
Hello there. I’ve been making tumblers using crystalac for 4 months now. I’m noticing in my squeeze bottle, my coats of BT get tiny little gummy wads of BT that hinder the smooth finish. I’m trying to decide how to explain it. Like little pieces that are drying or trying to dry. But I keep the squeeze bottle tip meticulously clean. So I finally decided to just replace what was in my bottle with more from my quart supply. What was in my tiny dispenser bottle had maybe been filled 2 weeks prior, so it wasn’t old but i cleaned out my squeeze dispenser and opened the quart of BT and it was FILLED with HUGE pieces of what looked like jelly. The lid was secure so it hadn’t been semi drying. So I got a paint filter and got every tiny piece out possible. All seemed well for a few coats after refilling the squeeze dispenser. However, I am now, again, beginning to see the tiny wads of jelly like pieces within my top coats again. What could be causing this repetitive problem? Have you experienced this?