@@ivancavazos158 I didn't lmao 💀. I'm probably gonna look for the connector on rock auto and find the circuit in the auto harness and wire it up. For now I'm just gonna use my cargo lamp when I back up at night lol
Can PPL join with PPL/WHT to starting the engine with CLUTCH PEDAL POSITION SWITCH because my car manual transmission is fix already the switch in the pedal ????
@@mohammedyousif8770 yeah so I just crimped the 2 wires together because I don't mind being able to run the starter with the clutch out, but if you wanted to only start with the clutch in I believe you just need to run those 2 wires to the clutch depression switch
I’m having to do this as I jus manual swapped my cateye but I have the newer nss plug so the quick jump is different and same with pin out but hoping the two wires under the fuse box are the same
You’re the fricken man🙏🏼 mid t56 swap now and this helps a ton
IM sure me n many others couldnt thank you enough for this VID!!!!!!!!!!!!!!!!!!!!!!
Best Video On UA-cam been trying to figure out how to do this for years thank you will update if it works for me please god let this work
Hey glad to help you if I can, I'm happy to shed some light onto the finer details of these trucks where I can
You should do one for reverse lights and vss🙏🏼
This helped me a ton with my NV3500 swap! Will cruise control work with it hooked up like that?
can you update us on the silverado, im bout to start my swap on a 06
Does this only work with a manual swap?
Did you need a tune when you did yhe manual swap
@@victor.hugo.differentialz I didn't do a tune. It seems fine to run without one, the only thing is the idle logic is a little weird
How did you wire the reverse lights?
@@ivancavazos158 I didn't lmao 💀. I'm probably gonna look for the connector on rock auto and find the circuit in the auto harness and wire it up. For now I'm just gonna use my cargo lamp when I back up at night lol
@@305_supersportcould you do an update once you do that I’m almost done doing a 5.3 nv3500 and this video helped a ton man 👏🏻
Can PPL join with PPL/WHT to starting the engine with CLUTCH PEDAL POSITION SWITCH because my car manual transmission is fix already the switch in the pedal ????
Because I change the engine with wires and fuse box also my engine wiring now for A/T
My car original manual transmission 2001 v6
Now v8 5.3
Because if i join PPL with YEL will bypass ..will not start with pedal
@@mohammedyousif8770 yeah so I just crimped the 2 wires together because I don't mind being able to run the starter with the clutch out, but if you wanted to only start with the clutch in I believe you just need to run those 2 wires to the clutch depression switch
I’m having to do this as I jus manual swapped my cateye but I have the newer nss plug so the quick jump is different and same with pin out but hoping the two wires under the fuse box are the same