Moore Motorsports James Dguy I painted my ek civic hatch with 5 cans of turbo white spray paint. 1 light coat with 2 pretty thick coats. The cans seemed the burp or sputter when they got close to empty. It made a drip on my quarter panel. Other than that it came out well I have pictures but can’t post them. I’ll make a video and comment it to you to check out. I followed your videos on how to spray paint your car and just did it. Never picked up a can of paint before.
@James Dguy Im about to paint my fatherinlaws Silverado with the rustoleum turbo paint . And I bought a couple cans of the 2k clear.. do you think I should use the 2k clear can?
These use a 4mm valve instead of a 3mm like most US spray paint. The cap will work on Valspar and Krylon Fusion cans though, both use 4mm valves as well.
James I sent an email off to Rustoleum telling them they really need to consider sponsoring your channel. Keep up the good work and thanks for sharing the videos
HOLY SHIT I was just about to buy an electric sprayer to paint my trunk and saw this, this is a GAME CHANGER THANK YOU, imagine this in a 2 k clear!!!!!
F the haters....doing my 06 RSX DIY, finished all the suspension, replaced everything, links to new brakes system, going to do a new body kit and am going to use your DIY spray can method thanks for all the Help
That's a phenomenal product James. Rustoleum really should sponsor you or at the minimum send you some free products. Even if they only make that paint in white just paint the whole car white. The time savings is worth the tradeoff in color preference and you could do a gray to block fade along the bottom quarter of the car and I think that would look awesome. I've always liked the fade type paint jobs but I never knew quite how it's done.
Just saw your video and decided to paint the top of my 91k5blazer fiberglass shell it turned out awesome so now I'm thinking about painting the whole blazer with this paint
I did a full size truck topper with this product- Menards was $5 a can.. You might not have had the chemical lift/reaction if you would have sprayed a very gentle light tac coat at 1st----- go easy--- let the chemicals Mate together
Bob Smyth Yes, , agree, as a long time painter, a fog/tack coat works to bond incompatible materials. I have sprayed lacquered cabinets with paint using this method. Always best to wait 30 days to recoat solvent based coatings
@@aaronb3024 I think 4 cans at $5 a can- I bought 5- be aware the drift of over spray carries a long way- so cover anything around the fine tiny paint dust creates OTHER problems
Man, you never disappoint brother!! This again is a great video!! I really hope they have that in smoke grey but I’m liking this gloss white as well.. looks great!! Keep up the great work my man!!
Gm James, I have a question if I were to spray my car with this turbo gloss white would I have to wet sand after every coat before spraying 2k clear coat spray? Also what grit would I use to sand the base coats? And last question would I have to wetsand clear coat as well and with what grit?
I wouldn't really count on a Rustoleum sponsorship. I read a story about one guy when researching roller paint jobs who made an art car to be shown at actual art exhibits, using Rustoleum products. He asked Rustoleum for some support for materials, and they said no, but then once the car was finished and rolling around the country in art exhibits Rustoleum asked if they could showcase his car (I think for free) and he said no.
Who would think your faking these videos???Your content is great!!!And because of your videos Ive done some rattle can job or two that came out great.Tryna do my work truck next before we get this rough winter in the northeast.Saludos from jersey😎🤙🏽
THE GREATEST paint job starts with the best mix,mixing the paint is the paint job,this product, i will use as it has exactly what i want a large output spray pattern,when you get good,confidence in your painting technique,having a mix come out quicker is perfect for getting the job done and staring at it won't make it dry faster,on to the next project,time is money
Little advice, if you didn't Know. Always do where taillight's and license plate, or anyplace that has corners or edges tucked in first. Like painting your car. You always start with door jams trunks lid areas under hood along rocker panels and down. It's easier to make sure you have total coverage and not end up with to slightly different shades of whatever color you use. To make it blend together.
That came out great! I was debating on using that or the quarts. I just painted my car with 2 of the quarts, thinned and hardener. I still have rear bumper and mirrors to do. I think I’m going to use this! Thank you!
See that everyone he did this stuff and dont look fake to me. Hating ass people sorry for the bad language it's just upsetting how people hate and won't appritiate what others do for them. I'm still working on my channel on car repairs and I'm like 100% sure people are going to hate on those 2 but oh well. Your the best James keep up the good work.👍. Haters lay the he'll off.
Sponsor this man rustoleum.He is the only person I would ever recommend anyone for a sponsorship however this man has made a rustoleum fan out of me ive probbably spent over $700 Experimenting with rustoleum products because of james D.
Spraying tip: You should start your paint spray before you hit the surface, not while you're over the top of the surface. Does that make sense? Looks good though!
James Thanks but there are so many great you tubers out there that have big shops/nice cameras and money. I try to keep it real and save money for everyone. I appreciate it though!
Thanks for the info. I airbrush small products and i had a problem where in some parts of the helmet i was airbrushing the paint came up like that i could not figure out what it was and that make total sense. My base coat wasn’t fully dry. Thanks bro!
I keep forgetting about Rustoleum because at work I use companies like SEM. The shops we go to don't even carry it. But your channel always reminds me. Thank you! This one video has me excited because I just bought a few cans of this in gloss black to try at work. I use CASES of SEM trim black for areas that I think this might work better faster and cheaper. The spots I am going to try are painting the wheel wells and underside of cars after they come back from detail and before being sent to car lots. Also painting lumber racks, and toolboxes and flatbeds on work trucks. All that takes absolutely forever with a normal spray can and it is hard to not get stripes and dry spots. Not to mention that a tall can of SEM trim black is close to $20. So yeah I have said it before, Rustoleum needs to sponsor you. Heck at least send you a pallet of free paint to test and share.
I've used it before It Takes a little practice It's easy to mess up And have runs You have to keep the can 15 inches away to start I painted a Garage door and it did a good job
You should let users send in photos of there outcomes and then you can put those photos at the end of your videos. I’m about to do 2 large truck fenders. I can’t wait.
Found this paint at home depot for $9 a can.Will be cheaper to buy there a 6 pack but that can in person is huge!So Im sure you can do your whole car with two and may have some leftover
11.95 is closer to 12.00 ...... other than that it's still a good price for some good rattle can paint ...... going to be doing my 91 Dodge full size van soon with Rustoleum paint .... good videos keep up the good work
Been putting Brake-kleen spray tips on spray cans for years to achieve this same result! Granted it wasn't exactly a "fan" pattern but trust me, if you knew how to spray it, you could get a decent paint job!
Good visual. Concern about orange peel. Wanting to paint front door. Don’t have high volume air tank. Will this product have the same finish as on original metal door. Thank u Tim
Cool video, thanks for posting. But I checked around and they only make 2 colors for the turbo paint. Hopefully they will make all the colors. I wanted to get Satin black......
Jun Agregado It really is amazing stuff. I am hoping if I get sponsored by Rustoleum that they will listen to my request for different colors of turbo paint
Rustoleum need to sponsor this guy. Just look at how many people viewing his can paint using just rustoleum can product. I sent an email to rustoleum marketing.
Michael Riley When using the turbo spray can I would choose it over a gun. If you have all the equipment and everything for the gun then I would use the gun over normal cans. But since I usually don’t have all the time to set up a gun and let my small compressor build up after every short burst of paint I prefer cans.
How would you fix the issue at 6:23 where it bubbled up from the undercoat not being cured? I just experienced this issue. I think I waited too long between coats? (I waited 20 minutes between coats. 4 coats, first two coats were very light coats. Outside temp ~85° F if that helps you answer the question?)
@@JamesDguy thank you for the reply. I tried wet sanding and I found that a lot of the surrounding paint was soft and squishy. Even 3 days after curing. I ended up sanding away 90% of the paint (with 220 grit) and will be re-painting tomorrow. I will shorten the time between coats and only do 3 or 4 coats. I'm used to plasti dip and have been using their aerosols for years, so I watched a ton of your vids to learn more about painting with paint. Great stuff 👍 I wish I found the channel before I made the mistake
So the Rustoleum shake can will never be a great automotive paint, since it doesn't have hardener. I bought the rustoleum paint at Walmart in quart cans. Used enamel hardener bought on Ebay, thinned with enamel reducer. Used a cheap harbor freight gun. Results are far superior to the shake can and much cheaper! You can wet sand the paint and buff it to a high gloss! Paint held up well and looks great!
Spray Volume looks similar to a spray gun..love to try that nozzle with a 2k spray can, also looks like you were spraying a bit far away from the panel? lots of paint spraying out of that nozzle though so not bad for a first time attempt
@@JamesDguy oh yeah for sure james i didnt mean it that way! I was just commenting on the volume of paint that can is capable of spraying with that nozzle setup. But i did think you were spraying a bit too heavy and far away from the panel at times which is obviously going to cause the orange peel effect.. Im sure you'll adjust and spray some good finishes with it 👍
Here is a 6 pack of this turbo paint!
amzn.to/31erfLc
Moore Motorsports James Dguy I painted my ek civic hatch with 5 cans of turbo white spray paint. 1 light coat with 2 pretty thick coats. The cans seemed the burp or sputter when they got close to empty. It made a drip on my quarter panel. Other than that it came out well I have pictures but can’t post them. I’ll make a video and comment it to you to check out. I followed your videos on how to spray paint your car and just did it. Never picked up a can of paint before.
The civic was red so I had to use a little more of the white than probably the black would of needed.
What would it look like with 2k clear on top
@James Dguy
Im about to paint my fatherinlaws Silverado with the rustoleum turbo paint . And I bought a couple cans of the 2k clear.. do you think I should use the 2k clear can?
These use a 4mm valve instead of a 3mm like most US spray paint. The cap will work on Valspar and Krylon Fusion cans though, both use 4mm valves as well.
The rust-oleum turbo tips don’t fit on the other cans. I tried. Link to buy a can is in my description.
James I sent an email off to Rustoleum telling them they really need to consider sponsoring your channel. Keep up the good work and thanks for sharing the videos
Moore Motorsports James Dguy I was about to ask you that. Wow they smart.
I've been wondering about if the tips would fit other cans. Thanks for the demo and showing how it works. Another great video as always!
Moore Motorsports James Dguy do they have more colors than white? And great job it looks fantastic
@@vermontjeff2535 I checked their website but the only colors I saw were white and black
Man that can spray output is incredible. Great vid
SwagGod 22 Thank you 🙏🏻
HOLY SHIT I was just about to buy an electric sprayer to paint my trunk and saw this, this is a GAME CHANGER THANK YOU, imagine this in a 2 k clear!!!!!
I would let the can sit in a bowl of hot water to allow the paint to spray smoother
I'd be game changing if they came out with a clearcoat with the turbo nozzle
They have it now.
The first shot of paint! My jaw dropped! That's amazing! Could do a whole car with like 5-6 bottles! Lol awesome video!
K5Daily !! probably less to be honest this thing still has a lot in it. Guess I will have to test that in a up coming video 😁
@@JamesDguy will be definitely looking out for it. Great job, I definitely hope they make more colors. Wouldnt mind doing it to a project car myself.
F the haters....doing my 06 RSX DIY, finished all the suspension, replaced everything, links to new brakes system, going to do a new body kit and am going to use your DIY spray can method thanks for all the Help
Haters will hate. Professionals will laugh lol.
That's a phenomenal product James. Rustoleum really should sponsor you or at the minimum send you some free products. Even if they only make that paint in white just paint the whole car white. The time savings is worth the tradeoff in color preference and you could do a gray to block fade along the bottom quarter of the car and I think that would look awesome. I've always liked the fade type paint jobs but I never knew quite how it's done.
ghogue61 I’m hoping they hear everyone’s response on needing to sponsor me or at least letting me do product reviews.
everybody: How many times can you paint something?
James Dguy: Yes!!
Just Wrench It Haha yes
I thought about doing this to my van but wasn't sure if it would work thank you for helping now I can paint my new van
The spray pattern is great. If only they made it spray finer and only 2-3x as fast and not 4x, that spray can would be perfect 👍
Just saw your video and decided to paint the top of my 91k5blazer fiberglass shell it turned out awesome so now I'm thinking about painting the whole blazer with this paint
Keep that can. Tap an orifice to refill, and tap a tire valve. Refill over and over.
Paradise Tinting Great idea!!
Haters are going to make up stories. Keep spraying dude. Wish you was closer, I got a car that needs some paint.
I did my whole car with this exact paint and can and it came out amazing!!
Rob THAT IS AWESOME!!
Rob I want to see your car, I want to paint my eg hatch. How can I see your car
@robs_lowkey on IG its the white integra
Rob Following on IG now
Moore Motorsports James Dguy came out dope man. Did you spray clear?
I did a full size truck topper with this product- Menards was $5 a can.. You might not have had the chemical lift/reaction if you would have sprayed a very gentle light tac coat at 1st----- go easy--- let the chemicals Mate together
Bob Smyth
Yes, , agree, as a long time painter, a fog/tack coat works to bond incompatible materials. I have sprayed lacquered cabinets with paint using this method. Always best to wait 30 days to recoat solvent based coatings
How many cans did it take? Im considering spraying my Celica
@@aaronb3024 I think 4 cans at $5 a can- I bought 5- be aware the drift of over spray carries a long way- so cover anything around the fine tiny paint dust creates OTHER problems
Holy crap! That is insane!
It looks like paint in an undercoating can, amazing coverage, great to keep the wet edge, thanks for this demo!!
QQTrick1QQ For sure it’s awesome stuff 💪🏻
Man, you never disappoint brother!! This again is a great video!! I really hope they have that in smoke grey but I’m liking this gloss white as well.. looks great!! Keep up the great work my man!!
christian dayrit Thanks and ima try hard to see if they can make it in smoke grey
Gm James, I have a question if I were to spray my car with this turbo gloss white would I have to wet sand after every coat before spraying 2k clear coat spray? Also what grit would I use to sand the base coats? And last question would I have to wetsand clear coat as well and with what grit?
I wouldn't really count on a Rustoleum sponsorship. I read a story about one guy when researching roller paint jobs who made an art car to be shown at actual art exhibits, using Rustoleum products. He asked Rustoleum for some support for materials, and they said no, but then once the car was finished and rolling around the country in art exhibits Rustoleum asked if they could showcase his car (I think for free) and he said no.
GilBatesLovesyou Well gonna hope for the best
Who would think your faking these videos???Your content is great!!!And because of your videos Ive done some rattle can job or two that came out great.Tryna do my work truck next before we get this rough winter in the northeast.Saludos from jersey😎🤙🏽
Hood Mukbangs Yea people are ignorant I guess idk 🤷🏻♂️
Moore Motorsports James Dguy bunch of haters if you ask me
THE GREATEST paint job starts with the best mix,mixing the paint is the paint job,this product, i will use as it has exactly what i want a large output spray pattern,when you get good,confidence in your painting technique,having a mix come out quicker is perfect for getting the job done and staring at it won't make it dry faster,on to the next project,time is money
Little advice, if you didn't Know. Always do where taillight's and license plate, or anyplace that has corners or edges tucked in first. Like painting your car. You always start with door jams trunks lid areas under hood along rocker panels and down. It's easier to make sure you have total coverage and not end up with to slightly different shades of whatever color you use. To make it blend together.
That came out great! I was debating on using that or the quarts. I just painted my car with 2 of the quarts, thinned and hardener. I still have rear bumper and mirrors to do. I think I’m going to use this! Thank you!
TJ Blando For sure and best of luck!
See that everyone he did this stuff and dont look fake to me. Hating ass people sorry for the bad language it's just upsetting how people hate and won't appritiate what others do for them. I'm still working on my channel on car repairs and I'm like 100% sure people are going to hate on those 2 but oh well. Your the best James keep up the good work.👍. Haters lay the he'll off.
Alejandro Rodriguez Yea they always hate me for no reason makes no sense. But thanks I subscribed awhile back.
This product give me hope to repaint my body kit for my Tacoma and keep the cost down by a lot.
Use a tripod!! Just kidding haha. I sent one by mail. You'll get it today.
Good looks!
KillaCaff1 Thank you I just got it in the mail!!!
🥰
That was the greatest comment I’ve ever red lmao
@@802Garage ay tiktok gang
Sponsor this man rustoleum.He is the only person I would ever recommend anyone for a sponsorship however this man has made a rustoleum fan out of me ive probbably spent over $700
Experimenting with rustoleum products because of james D.
The only colors I've seen in that big can are black and white. 🤷♂️ that fan is impressive tho. Definitely want to try the black one now!
GT's Performance Me too! I wanna do it on a hood or roof then wet sand it see what happens
@@JamesDguy its like an hvlp gun in spray can form.I wonder if that nozzle would work on a can of the rustoleum 2x
sinformant They don’t :(
@@JamesDguy exactly! Im pretty sure you can get a mirror finish after a wet sand, buff and maybe even a polish to get that extra deep reflection.
Holy cow! That thing sprays like an air gun.
Thanks, James... have been wondering about those tips; would be nice if they had more colors; only black and white where I've seen it.
I have not seen that one yet but I will look for it. Thanks for sharing James!!
El Bori For sure it’s awesome stuff!
I love the 2x... This is next level 😁😁
rich Right this is actually 4X 😎
i find also humidity causes orange peal . Was told to paint around 10 am sun burning off dew but not as much humidity.
Thanks for your videos, I just filled out the form to help to sponsor you.
Spraying tip: You should start your paint spray before you hit the surface, not while you're over the top of the surface. Does that make sense? Looks good though!
I think you are the best UA-camr ever
James Thanks but there are so many great you tubers out there that have big shops/nice cameras and money. I try to keep it real and save money for everyone. I appreciate it though!
thank you for the content i appreciate it! this gives me a bump of motivation. coming from honolulu hawaii🤙
Far out rustoleum! Got 2 cans black satin for 2001 f150 waiting for warmer days. Thanks
Thanks for the info. I airbrush small products and i had a problem where in some parts of the helmet i was airbrushing the paint came up like that i could not figure out what it was and that make total sense. My base coat wasn’t fully dry. Thanks bro!
Nice bro. I got a 40yr old classic car I need to spray color on to prevent rusting till I get a proper paint job. Thanks for the info!
Mad props,great job!! I'm tempted to try this on my Studebaker as a 'dofer' paint job.
Great video! Keep it up man! Big fan of your DIY projects!
I keep forgetting about Rustoleum because at work I use companies like SEM. The shops we go to don't even carry it. But your channel always reminds me. Thank you! This one video has me excited because I just bought a few cans of this in gloss black to try at work. I use CASES of SEM trim black for areas that I think this might work better faster and cheaper. The spots I am going to try are painting the wheel wells and underside of cars after they come back from detail and before being sent to car lots. Also painting lumber racks, and toolboxes and flatbeds on work trucks. All that takes absolutely forever with a normal spray can and it is hard to not get stripes and dry spots. Not to mention that a tall can of SEM trim black is close to $20.
So yeah I have said it before, Rustoleum needs to sponsor you. Heck at least send you a pallet of free paint to test and share.
I've used it before It Takes a little practice It's easy to mess up And have runs You have to keep the can 15 inches away to start I painted a Garage door and it did a good job
Thanks....I will be painting my ram air hood with this....and it's a white Malibu...real cheap and effective.
You should let users send in photos of there outcomes and then you can put those photos at the end of your videos. I’m about to do 2 large truck fenders. I can’t wait.
Sal Gonzalez I have a ton of pictures sent I will be doing subscriber pictures videos
I’m in luck 🍀……… 2002 Toyota Camry is already white ! ! ! 👍👍👍👍👍
Rust oleum Turbo………. Here I come !!!!
Thank you for sharing……. Great tips.
😎
Found this paint at home depot for $9 a can.Will be cheaper to buy there a 6 pack but that can in person is huge!So Im sure you can do your whole car with two and may have some leftover
Ppl. Are gonna say what they want keep doing your thing bro.
francisco saenz I always will and they can say what they want and I will delete what I want perks of it being my channel 😁
Great video! Hope they come out with more colors asap! Question...
Do you wet sand out orange peel before or after clear coat?
This makes me want to paint my truck with turbo paint even more.
11.95 is closer to 12.00 ...... other than that it's still a good price for some good rattle can paint ...... going to be doing my 91 Dodge full size van soon with Rustoleum paint .... good videos keep up the good work
Yea my wife rubbed off on me she does that all the time explaining how something is say 11.99 and she says its $11 so sorry yes its $12 after tax.
Just under $9 a can at Menards. :)
They also have a turbo truck bed coating spray. Saw it at autozone.
Joshua Serrano Yup i saw that to. ! I wanna use it to see how it does.
Moore Motorsports James Dguy Awesome! I’ll be looking forward to that video for sure
Strongly suggest not painting at night. Looks good would come out alot better during the day.
That turbo paint looks like it would be great to paint a car look forward to that video brother
GOING TO TRY IT ON MY OLD TOYOTA PICKUP
We've been around long enough to know you aren't faking videos
Walt Thizzney Thanks I have nothing to gain from faking
Can you remove the nozzle and use it on another aerosol can?
kevin It does not fit unfortunately. I tried
@@JamesDguy aw i wish it did so i can use the nozzle on other colors
😂 that trunk lid looks familiar, im seriously impressed with that spray, maad quick
Tyler Parker Haha for sure man super quick! It might look familiar because it’s your old trunk lid 😂😂
First off I love the videos keep it up . So what is the best Spray paint in your opinion? I have seen you use so many different kinds
Love the content👌🏽 what clear coats are compatible with the turbo? 2k???🤞🏽😬
Looks amazing that can is extraordinary how much paint was left in the can?
Qscope505 _ A lot it felt like it was over half still
@@JamesDguy that's crazy I might use these for my whole car
I'm impressed. Probably get some just to have on hand because I'm always painting something.
I wish this came in matte black... i wish rustoleum offered different spray caps for their product.
Good video ,huge pattern. On spray can like a real gun am impressed:)
Been putting Brake-kleen spray tips on spray cans for years to achieve this same result! Granted it wasn't exactly a "fan" pattern but trust me, if you knew how to spray it, you could get a decent paint job!
808 Tait 😨jackass✌✌👏👏👏👏✌👏👏👏✌
Good visual. Concern about orange peel. Wanting to paint front door. Don’t have high volume air tank. Will this product have the same finish as on original metal door. Thank u Tim
Cool video, thanks for posting. But I checked around and they only make 2 colors for the turbo paint. Hopefully they will make all the colors. I wanted to get Satin black......
Original Rebel They make bed liner turbo paint which looks satin black but not sure on the exacts.
Hell yeah I can spray my Express work van now
Anthony Casey You could indeed
Damn that's actually looks solid. Definitely doing this on my truck
Jun Agregado It really is amazing stuff. I am hoping if I get sponsored by Rustoleum that they will listen to my request for different colors of turbo paint
Can you use this with the 2k clear?
Slump Crew Clips Yes spray max 2k clear don’t react when painted over this
@@JamesDguy Do I need to wait some time before I can spray the 2K clear?
Good stuff, how long would you wait to apply the 2k spraymax clear?
Maybe rusto trying to compete with Montana Maxximo cans. I get the feeling this is aimed more at the graffiti niche than the car painting niche.
The MASTER of spray can painting lmao
Wow, cool! I need to paint my whole trailer and this looks like a good fast way. I imagine it comes in black?
Toppervision1 Yes gloss black and a rough texture black so it would look matte black
This stuff comes out crazy fast
DC2thomas Right! I love it
i wished the can match colors to factory paints
Always a pleasure to watch James. Did you moved from Kansas to Texas?
Tim Heasman Yes I moved from Kansas to texas about 5 months ago
Nice review on the turbo paint !
rmahi17 Thanks!
hello love your videos keep up the good work learning so much
sonnygee 16 Thank you I will do my best
I've got to get some that paint very cool so fast looks pretty good too.
Why so Serious? it is awesome stuff!
@@JamesDguy Yeah I like the wider spray nozzle on it. Have you tried it on the roof of a car seems like it would make it a little easier.
Why so Serious? I will try it for sure!
@@JamesDguy Yeah seems like it would be a little easier that way...
Rustoleum need to sponsor this guy. Just look at how many people viewing his can paint using just rustoleum can product. I sent an email to rustoleum marketing.
Crypto ExtraCheeze Thank you 🙏🏻
Can u put a clear coat on this paint and how long would h wait after ur last coat of the white to put on the clear coat
Keep up the good content. Love it.
hey who farted Thank you I will 😎
I wish they could make a version that would go on thinner. Great stuff though.
Is it available in a flat matte black?
Bobby Rains Yes and it is beautiful
@@JamesDguy where? I've only found gloss black
Do you think it’s more efficient with rattle cans or a gun?
Michael Riley When using the turbo spray can I would choose it over a gun. If you have all the equipment and everything for the gun then I would use the gun over normal cans. But since I usually don’t have all the time to set up a gun and let my small compressor build up after every short burst of paint I prefer cans.
I understand. Contemplating painting my 2000 tundra. It needs bodywork 1st though. Thanks for the reply. Not having to use a compressor is a bonus.
Ima use this to paint my trunk definitely !!
How would you fix the issue at 6:23 where it bubbled up from the undercoat not being cured? I just experienced this issue. I think I waited too long between coats? (I waited 20 minutes between coats. 4 coats, first two coats were very light coats. Outside temp ~85° F if that helps you answer the question?)
BLUEFEATHEREDOLIVES wet sand it down re coat is the only thing I could think of.
@@JamesDguy thank you for the reply. I tried wet sanding and I found that a lot of the surrounding paint was soft and squishy. Even 3 days after curing. I ended up sanding away 90% of the paint (with 220 grit) and will be re-painting tomorrow. I will shorten the time between coats and only do 3 or 4 coats. I'm used to plasti dip and have been using their aerosols for years, so I watched a ton of your vids to learn more about painting with paint. Great stuff 👍 I wish I found the channel before I made the mistake
So the Rustoleum shake can will never be a great automotive paint, since it doesn't have hardener. I bought the rustoleum paint at Walmart in quart cans. Used enamel hardener bought on Ebay, thinned with enamel reducer. Used a cheap harbor freight gun. Results are far superior to the shake can and much cheaper! You can wet sand the paint and buff it to a high gloss! Paint held up well and looks great!
Good work. Thanks you convinced me to rattle can my car in my UA-cam pic. Now I’m going to used this. 👍🏾👍🏾👍🏾👍🏾👍🏾
im currently work on a panel on my car. can i see the steps after it's buffed? do you clear it?
Spray Volume looks similar to a spray gun..love to try that nozzle with a 2k spray can, also looks like you were spraying a bit far away from the panel? lots of paint spraying out of that nozzle though so not bad for a first time attempt
Aido Wilson First time with the turbo can. Definitely not my first time painting ever for sure lol
@@JamesDguy oh yeah for sure james i didnt mean it that way! I was just commenting on the volume of paint that can is capable of spraying with that nozzle setup. But i did think you were spraying a bit too heavy and far away from the panel at times which is obviously going to cause the orange peel effect.. Im sure you'll adjust and spray some good finishes with it 👍
That is the same as a clear coat right ?
Going to attempt to try on my gen 7 maxima hood?? Have a faded paint clear coat that is gone. Any recommendations?
Family Espinoza there’s you tube videos on that out there
For sure follow up in a wet sand and buff in another video.
Eric Archuletta Will For sure!!
What kind of primer should I use before using this turbo can paint? Also after painting it, what number sand paper should I wet sand the paint?
Chris B any ol rusto primer should work great
Can you wet sand and buff the base coat before applying clear?