honda odyssey p0740
Вставка
- Опубліковано 16 лип 2024
- thank you for watching!!!!!
If this video was helpful to you and if you would like to place a donation, here is my Venmo and PayPal information. Or I would really appreciate it if you could share my UA-cam channel on your social media. Links will be on the bottom.
#hondaodyssey #mechanic #jabothemechanic
venmo.com/code?user_id=265066...
www.paypal.me/urbanautomotive - Авто та транспорт
Thanks for posting!
Glad it helped
the way he tapping the solenoid on the batt you know he pulls X'D
Thank you very much for this detailed instruction video. You stressed the importance of replacing the o ring and the gasket. Where or which end does the o ring go?
I had my mechanic replace that solenoid (plus A and B) because I had the codes. The engine light didn't go away, and even got the TCS light (come and go), the 2nd gear has a noticeable "jump". But, I'm pretty sure those lil cylinders you pulled out, were not cleaned. I'm having him get them out, and cleaned, then I could either put the new/old solenoids back, since (the old ones) work good; probably just needed the cleaning (of those cylinders). Thanks for the vid!
How did it go? Did you ending up fixing your issue?
@@mtsanchez27 the issue was fixed, by clearing the parts, and getting new rings. The new cylindes I had bought were not good (didn't solve the problem and added yet more codes), prob because I got them thru ebay. I've found out lots of ebay parts (for vehicles) are just not worth buying (bad quality).
@@ctinieblas1228 what do you mean by clearing the parts?
@@mtsanchez27 *cleaning (typo error)
@@ctinieblas1228 thank you so much!
I just refill my odyssey with 3 1/2qts and have no codes. I plan on replacing the filter and clean out as many solenoids as I can get to and new fluid again. When I shift into drive there's a 1 second delay but reverse is fine. Any comments. Great video 👍
You have a video showing the other solenoids as well?
Did you fixed the problem code P0740?
Do you know what the bolt at the side of the solenoid switch is for? I am having the problem and I purchased a replacement one on Ebay new. But it exaggerated the shift problem. I saw on Google where the pressure can be adjusted but I am not sure how. I am thinking that the bolt may be for a purpose but what?
Is this the lock up solenoid?
short one is the last one? i diont know.
On the solenoid block there's a 10 mm plug on the side does anybody know what thats for?
What’s the name of the solenoid?
Do you have to drain the transmission fluid first.?
No
Great info 👍.......
So where did u get the replacement ... theres so many videos on this topic but never post the part number and or where u purchased the part . Theres so many parts on Amazon and ebay that never does the job . O'Reilly and autozone some times have the part . Usually gotta buy it from honda .
Autozone has it
😎
We have no idea why you went in there for that. You never said what was wrong with the car,what it does not do?
Sorry about that. It had a check engine light for p0740 and no drive ability issues ran perfectly fine. Customer complaint was only the check engine light
Is there anything specific you have to do after putting the new one in? Or is it just put back together and go?