DO STIFF ENGINE MOUNTS MAKE A DIFFERENCE?
Вставка
- Опубліковано 20 гру 2018
- Finally the EG Honda Civic gets some more love! In this video, we install Hasport mounts on the EG and the difference is night and day. We highly recommend race oriented mounts if you want more response and feedback from your engine. We hope you enjoy this video and we hope it helps anyone out there wondering if engine mounts are worth the money!
Instagram:
valley._.crew - Авто та транспорт
This made me confirm my decision to go with standard mounts
I just installed all polyurethane mounts and now my ride is back on my lift im going to go back with stock rubber mounts. The car vibrated me to where I was almost numb lol
You have to break them in. They get smooth with time.
@@fuser4397 how long it takes to break in? 💀. Both my da and dc4 integras mounts are doodoo, tryna find good mounts
@@abrasive59 bro Im so annoyed of mine Ima just get standard ones 😂
@@fuser4397 HOW LONG DO THEY TAKE TO BREAK IN??
Good video man!
Hasport mounts are such a good investment!
That piece of the linkage you reffered to as the traction bar is actually the shift linkage stabilizer bar or "linkage stabilizer".
thanks for the TIP on how to remove stud
I got these too! Fkn amazing
*_Looking to get stiff motor mounts for my 97 Civic eK hatch also. It is a D16 though. Doing my research until I find some good ones. I might pick these up though._*
HASPORT‼️ ON MY 2007 FA5 LOVE IT.
ONLY INSTALLED UPPER TORQUE & REAR MOUNT 62A‼️
BIG DIFFERENCE .NICE AND TIGHT‼️
Rich S how’s the vibration? I ordered the full kit, just came today. Can’t wait to install it
2:42 😂 my man ✌️😎✌️
Yea bro dont worry bout the noise it breaks in later on gonna go back to regular sound,sicc ass video tho u da only one who made the most precise video about the rear mount 👌🏾
? Do the noise or vibration breaks in?
@@leomartinez3368 yes
around how long does it take to break in
Give it like a good 4000 miles to break in depends how u drive
Thanks team
lol dude u can hearz duh tranzmission whine... its like a dogbox right now!!
What did you guys paint the car with? And is there a video on your rear bumper cut?
Where did you get the bolts for the transmission I only have one bolt and the other 2 are studs ?
Can I ask you, after installing the rubber tripod, the situation is less vibration and noise reduction compared to the tripod rubber manufacturer of the manufacturer?
i just got 1 for my delsol its 62A street driven. eventually will do the other two. shits not cheap though. the one im replacing is clapped pretty bad anyway
Bro how does the 62A feels? Any vibration?
I would like to know too hehe
Which kit is this mine are same ones needed
I just put my mounts in.....went with 60a for daily lil vibrantation but the response on the car is next to nothing. And the clutch feels good
What do you mean the response on the car is next to nothing?
@@tuftwrld quick throttle response.
@@richport8146 and the transmission gets louder like in the video?
@@Pier1668 yea, especially in reverse. You feel the vibrations, and after a week you get used to it and it feels normal.
@@Pier1668 I have them on my Ep3 si
What was the stiffness on these mounts, 62A?
1997 honda crv , all wheel drive. I do go off roading, mildly. I am looking for a decent set of motor mounts. That would better handle the jolts , bumps, different angles , and uphill stress. I think I want something better than stock. I'm not sure so I'm watching a lot of videos on this stuff. This is the first video I seen of this name brand that you installed. Thanks in advance.
Hasport is a leader when it comes to aftermarket motor mounts for Honda/Acura. They are much more pricey because all mounts and tech are designed in house and the mounts are made in the US. You would be in good hands with hasport. I have seen some people get away with copycats and lesser brands if you don’t wanna fork the money
I got the same style crv. What mounts did you go with? It looks like oem would be best.
I recently put 1320 mounts in my eg coupe with a b18b1, and it rattles like a MF lol my GF hates it now lol 😆
yea i was gonna try those however want level II hasport
I got Sickspeed mounts, and i think theyre the 92a mounts, i got them for Christmas so i didnt actually buy them, but they rattle like crazy. I don't mind it 😅 no one else likes it
So more me rattling coming from the engine bay cuz my teggy doing that
How do you get rid of the rattling? Just uprated my clio 182 engine mounts and everything in the car rattles!!
With performance motor mounts the whole point is to prevent the engine from vibrating separately from the rest of the car so more of the engine rolling or torque goes to the wheels more immediately (because the engine will no longer roll in the engine bay). So with that said engine nose is going to increase dramatically unless you go with less performance oriented mounts
Garrett R thanks for that very detailed and useful!!!
Which mounts are the exactly ? Because the highest one is race and then the two below it are extreme race and super extreme race.
Let’s see if I’m tough enough for it
@@iintegral9606 How was it?
my Em1 civic stock engine mounts let the engine flex so hard the harmonic balancer dug into the frame rail and destroyed the pulley 96/00 driver side are the worst mount designs
LMFAOOOOOOOOOOOO DAMNNNNN 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 that bad huh 🤔
That's on you dude. If you let a stupid problem like that go long enough to do real damage you're the only one at blame.
the engine is stiff!!
Did u ever have a problem with bolts getting lose after a while and falling out do , to the vibration
Omar C TORQUE WRENCH NICE & TIGHT.
@@amphedroxyn4251 *lockwire 😎 airplane style
Transmission/driveshaft teardown after high mileage will be the test
There should be less wear on the trans and driveshaft, since there isn't as much slack. It allows the connection between engine and transmission to be more precise and efficient. That's my view on it anyway. I have Street mount bushes and the gearbox is a lot more smooth and i have heaps more traction to the wheels (FWD).
the transmisson mount sucks on those went to try and install it and it doesnt fit holes all line up but the way they designed the mount made it so it doesnt fit u have to really modify it and thats something i dont want to waste my time with ... worthless waste of money
Hello cracked engineblock
Stiff mounts all around crack the block?
@@kreaola93 You're right. Block won't crack, solid mounts however will run that risk.
@@kreaola93 There has been times, when you run a solid mount on the engine and a softer one on the transmisson
Wrong they do not crack the engine block at all. I've had them many times before never an issue
doubt it dumbass