🙋🏼♂ Have Questions , Need Help Fixing, Troubleshooting, or Learning More about FPV? Join 'The Hangar' 🛩 my members only community - you get: 💰 Affiliate Program 🎁 Members Giveaways & Promotions 🎓 All my existing & new Courses 🧰 All my workshops (live & replays) 🧑🎓 All my Tutorials 📋 All my Guides 📺 All my Videos Add Free 🎬 Directors Cut Videos ⏰ Bench Time Live Hangouts 🤝 1:1 Help/Support ‣ Go to DarrenFPV.com to join or learn more 🔗 www.darrenfpv.com/the-hangar
An absolute outstanding video! I cannot believe how well you covered this A-Z. I finished my first build last week. Been buying the BNFs which are great but they didn't teach me much. I had to watch several different videos to get smart on everything. You have covered everything great, especially the choices of hardware. This is a model video for all newbie's to watch! Great Job!
Thanks JD, glad it helped you. Yeah there was a lot to cover, and it took ages to edit to be able to get that all into a single and concise 40 min video. I hear quite a bit parts selection and compatibility is a challenge, so hopefully that was covered effectively
I think I might have burnt up a fc and a vtx on my first build because I had no ideal you had to flash them and set up esc along with vtx.Your video probably saved me a lot of cash,thanks so much for the video. You have a new fan!
I didn't watch the video, it's long, I just went through the bookmarks. I just realized again that it's really not for everyone to be able to build a fpv quad, it's just too complicated. And this is the simplest version of the quad, it is without GPS and other things needed for example for LR. GPS problems are always on the next level. This video must scare the greenies. It is necessary to appreciate the enormous amount of work that has gone into the video so far.😎
Thanks MomoBrut... It looks intimidating to see how much goes into a drone build, but how do you eat an elephant? 1 Bite at a time. The thing is, you are going to need to learn to build one for FPV purely for the fact that even if you buy a pre-built drone, it will break when it crashes, then you will need to fix it. Knowing how to build is learning how to fix it.
@@DarrenAllatt Well, I built a lot of quads, that's why I write what I write. Putting everything in one video is I don't know how to say it, I actually said it. The rookie won't be able to understand most of the video anyway, and after half of it he'll be downright overheated. And those who are not greenies just smile and nod their heads, it's done nicely. It would probably be more reasonable to just do it gradually, do more separated videos ... but I'm older now, and maybe I perceive things differently. But young rookies just can't focus on something like that for that long.
Hey Darren, Its always good to watch builds, you always learn somthing new,thanx for sharing,i use to make vids and verry time consuming, even with todays tech.i just realized it was you from the other day when the quad took off at the end.hehe great stuff!! God bless n be safe.
For my next build video, what should it be? Drop your requests & parts suggestions? - What size? (3", 3.5", 6", 7") - Sub 250 Gram or Any weight - DJI 03, HD Zero, WalkSnail - Freestyle, Racing, Long Range - Full Size GoPro vs Mini GoPro, No GoPro? You tell me, what you'd like to see!
Learn to build a 5" Freestyle FPV Drone: www.darrenfpv.com/5-build-course With specific courses for each video system: ‣ Analog ‣ DJI O3 ‣ Walksnail ‣ HD-Zero
@@DarrenAllatt Not too long switched to 6s so I’ve only rebuilt recently. Latest was putting thicker XL5 V5 arms on a source one body…so far it’s indestructible😅💪🏼
I don’t fly iNav and it’s a PITB to setup. If you just want return to home, betaflight can do that and do it well… inav also has some build requirements such as positioning of the GPS etc.
It is worth mentioning at around 8:30 about signal polarization. I see that your receiver has right-hand polarization (RHCP), the same antenna should be on your googles. Also let me know which of two is most common? Thanks!
I have that coming up in the next month or so, just awaiting for the frame after Chinese New Year.. Make sure you are subbed to find out when that video drops!
I haven't like 3" since 3.5" became a thing. it used to be the Micro Apex, which is quite heavy for a 3" build, but QuadMula are sending me the Siren F3 (3") for another build video, so we will see how that goes, it looks very promising!
Wow man wot a video im gunna build my own now thanks to u my man please do one with dji 03 unit and crossfire cus thats wot i wanna build lol ❤❤❤❤❤ well done man awesomeeee vidddd
Yes you can toggle them on in BF, just set the switch in the modes tab. To fly in Australia you need to be a member of the MAAA and fly at an MAAA airfield with a spotter. But if a tree falls in the woods and no one is around. Did it fall?
When you say hot, how hot? They won’t be “cold” or pre-flight temperature as you have 26 volts running through them and they are spinning at 50,000 RPM. Also what quad are you using and how much does it weigh?
This drone or a Nazgûl Evoque would go the same speed. Top speed would be 120km/h If you are looking for speed, you want a 6S Racing Drone. Building vs buying, you get better quality for the same price.
So, most FPV Drones, like this one are designed for performance not efficiency. This is a freestyle drone, so it’s acrobatic and gets around 5-8 mins of acrobatics depending on how much you push it.
Hey Darren, another Aussie here. Just wondering how you get around flying FPV with Goggles... legally. I am in Melbourne and it seems to be totally not doable unless you belong to a club full of bellends.
In firmware Flasher on beta flight I have selected my correct flight controller (Speedybeef405V3) and the latest firmware version for the board next I load firmware [online] then flash firmware and then I get Failed to open serial port. Im not sure what’s going on.
Define “best” Won’t get the Antenna destroyed in a crash, RP2 RP1 gets a bit more range due to the exposed antenna vs a ceramic. For a 5” Freestyle, I’d go the RP1
You can, but: a) your ESC will most likely catch fire if you don’t put a motor output limit on it. b) yes if you put a motor output limit on in Betaflight
I'm from India, building my budget drone in category of racing. Here is the part list. Speedybee f405 V3 stack Readytosky gt2205 2300kv motor ZMR250mm frame 5inch triblade 2200mah 3s lipo
🙋🏼♂ Have Questions , Need Help Fixing, Troubleshooting, or Learning More about FPV?
Join 'The Hangar' 🛩 my members only community - you get:
💰 Affiliate Program
🎁 Members Giveaways & Promotions
🎓 All my existing & new Courses
🧰 All my workshops (live & replays)
🧑🎓 All my Tutorials
📋 All my Guides
📺 All my Videos Add Free
🎬 Directors Cut Videos
⏰ Bench Time Live Hangouts
🤝 1:1 Help/Support
‣ Go to DarrenFPV.com to join or learn more
🔗 www.darrenfpv.com/the-hangar
hi is this build 6s?
@@HariMotteram yes
An absolute outstanding video! I cannot believe how well you covered this A-Z. I finished my first build last week. Been buying the BNFs which are great but they didn't teach me much. I had to watch several different videos to get smart on everything. You have covered everything great, especially the choices of hardware. This is a model video for all newbie's to watch! Great Job!
Thanks JD, glad it helped you. Yeah there was a lot to cover, and it took ages to edit to be able to get that all into a single and concise 40 min video.
I hear quite a bit parts selection and compatibility is a challenge, so hopefully that was covered effectively
Bro you said awesome, i can understand clearly good job bro❤❤❤❤
i would have killed to have a video like this when I started. Great Job Darren!!
Thanks Sway
I think I might have burnt up a fc and a vtx on my first build because I had no ideal you had to flash them and set up esc along with vtx.Your video probably saved me a lot of cash,thanks so much for the video. You have a new fan!
I didn't watch the video, it's long, I just went through the bookmarks. I just realized again that it's really not for everyone to be able to build a fpv quad, it's just too complicated. And this is the simplest version of the quad, it is without GPS and other things needed for example for LR. GPS problems are always on the next level. This video must scare the greenies. It is necessary to appreciate the enormous amount of work that has gone into the video so far.😎
Thanks MomoBrut... It looks intimidating to see how much goes into a drone build, but how do you eat an elephant? 1 Bite at a time. The thing is, you are going to need to learn to build one for FPV purely for the fact that even if you buy a pre-built drone, it will break when it crashes, then you will need to fix it. Knowing how to build is learning how to fix it.
@@DarrenAllatt Well, I built a lot of quads, that's why I write what I write. Putting everything in one video is I don't know how to say it, I actually said it. The rookie won't be able to understand most of the video anyway, and after half of it he'll be downright overheated. And those who are not greenies just smile and nod their heads, it's done nicely. It would probably be more reasonable to just do it gradually, do more separated videos ... but I'm older now, and maybe I perceive things differently. But young rookies just can't focus on something like that for that long.
This is a great idea thanks bro
Awesome job on the video!! Plus thank you for explanation of the installation of props. After 4 or 5 videos, I got it down now!!!!! Whoop whoop
Glad it helped!
ONe of the best video for quad building!
Hey Darren, Its always good to watch builds, you always learn somthing new,thanx for sharing,i use to make vids and verry time consuming, even with todays tech.i just realized it was you from the other day when the quad took off at the end.hehe great stuff!! God bless n be safe.
Hey Michael, yes this took ages to put together!
For my next build video, what should it be? Drop your requests & parts suggestions?
- What size? (3", 3.5", 6", 7")
- Sub 250 Gram or Any weight
- DJI 03, HD Zero, WalkSnail
- Freestyle, Racing, Long Range
- Full Size GoPro vs Mini GoPro, No GoPro?
You tell me, what you'd like to see!
Sub 250g DJI 03
@@seanpaul211 Yes, excellent suggestion! Let's see what size Darren chooses!
A sub250 4" please
GoPro
Walksnail 250
Hahaha! "Red disgusting tape, I'm looking at you, Bardwell." 🤣
Read this comment exactly at the timing of that scene
AWESOME THANK YOU CHARL SOUTH AFRICA 😁😁😁😁😎🙏🙏🙏💪
Thank you for this amazing video. It is going to help a lot with my first build❤
You are welcome. Please let me know if I can help
Bardwell's infamous red tape. 😁 he uses cloth tape too. 😉
Great video! This contains all the information I need to build my first FPV quad. Beautifully explained!
You are welcome
Learn to build a 5" Freestyle FPV Drone: www.darrenfpv.com/5-build-course
With specific courses for each video system:
‣ Analog
‣ DJI O3
‣ Walksnail
‣ HD-Zero
very nice build tutorial :)
Thank you!
Man thank you so much for so much info thanks brother
No problem 👍
Love building ❤
What was the last quad you built?
@@DarrenAllatt Not too long switched to 6s so I’ve only rebuilt recently. Latest was putting thicker XL5 V5 arms on a source one body…so far it’s indestructible😅💪🏼
Superb video. With that said, is there good instruction on going from BetaFlight to INAV with this setup?
I don’t fly iNav and it’s a PITB to setup. If you just want return to home, betaflight can do that and do it well… inav also has some build requirements such as positioning of the GPS etc.
It is worth mentioning at around 8:30 about signal polarization. I see that your receiver has right-hand polarization (RHCP), the same antenna should be on your googles. Also let me know which of two is most common? Thanks!
Typically for Analog and HdZero you use RHCP and for DJI and Walksnail it’s LHCP.
I need this for a 3 inch to. This video was great
I have that coming up in the next month or so, just awaiting for the frame after Chinese New Year.. Make sure you are subbed to find out when that video drops!
@@DarrenAllatt Whats your Frame of choice for 3"?
I haven't like 3" since 3.5" became a thing. it used to be the Micro Apex, which is quite heavy for a 3" build, but QuadMula are sending me the Siren F3 (3") for another build video, so we will see how that goes, it looks very promising!
Wow man wot a video im gunna build my own now thanks to u my man please do one with dji 03 unit and crossfire cus thats wot i wanna build lol ❤❤❤❤❤ well done man awesomeeee vidddd
Thank you! Happy building!
Can you toggle horizon mode, angle and air mode in beta flight, great video helped me out tons, and is it hard to get a drone permit in Australia??
Yes you can toggle them on in BF, just set the switch in the modes tab.
To fly in Australia you need to be a member of the MAAA and fly at an MAAA airfield with a spotter.
But if a tree falls in the woods and no one is around. Did it fall?
i recommend you suggest what wiring to buy
what gauge, twisted or solid core .....
26AWG silicon. Get the kit I show off Amazon.
Is the speedybee F7 v3 stack pin out the same as the DJI 03 air unit wire to just plug in no soldering?
I know on the F4 it is, so I’d assume the F7 is too. Check the diagram on their website to be 100%
Thanks!
Hey, thank you so much for the super thanks! I do really appreciate that. Please let me know if you need any help
Which soldering iron do you recommended?
TS100
my tmotor 2207 v3 1950kv is hot after every flight, i set the motor timing to medium same as the video. Does that affect the temperature?
When you say hot, how hot?
They won’t be “cold” or pre-flight temperature as you have 26 volts running through them and they are spinning at 50,000 RPM.
Also what quad are you using and how much does it weigh?
Hello sir I have a question where should i connect ibus reciver to f405 v3 flight controll
Hey! I would try either the SBUS Pad or an RX Pad. That's not something I am used to as it's not common in FPV, so you may need to goggle that
Can you try to give an estimate of about how fast this drone might go on 6s? I’m debating if I should build my own drone or just buy a Nazgûl Evoque.
This drone or a Nazgûl Evoque would go the same speed. Top speed would be 120km/h
If you are looking for speed, you want a 6S Racing Drone.
Building vs buying, you get better quality for the same price.
GRAZIE!!
Prego!
If I use 1750kv motors and 4s battery is it wrong?
Not wrong, just under powered. Those motors are ideal for a 6S power source.
@@DarrenAllatt As I was told, it is the other way around. 1750kV motors cannot withstand 6s
@@vax_tawhoever told you that was completely wrong. You have it around the wrong way.
How to use the S9 pad on speedybee f405 v3 for PWM output?
I’m not google mate.
How long does this fly for? Just curious. New to the “drone life”
So, most FPV Drones, like this one are designed for performance not efficiency.
This is a freestyle drone, so it’s acrobatic and gets around 5-8 mins of acrobatics depending on how much you push it.
Hey Darren, another Aussie here. Just wondering how you get around flying FPV with Goggles... legally. I am in Melbourne and it seems to be totally not doable unless you belong to a club full of bellends.
In firmware Flasher on beta flight I have selected my correct flight controller (Speedybeef405V3) and the latest firmware version for the board next I load firmware [online] then flash firmware and then I get Failed to open serial port. Im not sure what’s going on.
Can you connect to Betaflight normally ?
@@DarrenAllatt yes
@@noahlee4933 try holding in the boot button on the FC as you plug in to usb, should go into DFU mode
can i use 6s 1550 mah 130c batteries on a 5 inch buuild with 2207 1850 kv motors or will a 1550 mah be to big and heavy?
Yeah it will be fine, just on the heavier side
T6 and R6 what is TX and RX?
Transmit and Receive.
When you wire. You wire a TX to an RX and a RX to a TX of the same number.
@@DarrenAllatt on speedybee not find TX or RX only T6 R6, the x is a placeholder, wire T to T and R to R ?
Rp1 vs Rp2 wich is best ??
Define “best”
Won’t get the Antenna destroyed in a crash, RP2
RP1 gets a bit more range due to the exposed antenna vs a ceramic.
For a 5” Freestyle, I’d go the RP1
Can you use a 2555kv with a 6s battery
You can, but:
a) your ESC will most likely catch fire if you don’t put a motor output limit on it.
b) yes if you put a motor output limit on in Betaflight
@@DarrenAllatt thank you so much, didn’t think you’d reply❤️
How i access camera menu ?
Which camera menu?
As in to change the camera settings, or to change the quad / drone settings
@@DarrenAllatt runcam camera setting bro how to change im use same FC and camera I connected rum cam blue wire CC pad but can’t access cam menu ?
do you have also some recommendation for a drone shop in europe/ germany?
I’m sorry I couldn’t recommend one as I don’t even buy from the US stores given I’m in Australia
@DarrenAllatt whats the build cost in Aud?
oh no JB is in danger
Oh I got a heart. My pleasure
I'm from India, building my budget drone in category of racing. Here is the part list.
Speedybee f405 V3 stack
Readytosky gt2205 2300kv motor
ZMR250mm frame
5inch triblade
2200mah 3s lipo
You should of made it clear that u don't need fpv
💨🚀🎮🥽😇😇👏👏👏👏